This driver supports the PWM driven LEDs. The devices are created from
the DT nodes with a compatible property matching "pwm-leds". For each
child node a LED is created and its "pwms" phandle's node is used to
retrieve the PWM configuration: channel, period and flags. If some of
this properties are missing (it is the case for some PWM controllers),
then reasonable default values are used.
This driver implements the following LED API methods:
- led_on
- led_off
- led_blink
- led_set_brightness
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
This patch introduces the "led" shell command. This allows to run the
LED API functions (and to test the LED drivers) from the Zephyr shell.
The following subcommands are supported:
- on
- off
- get_info
- set_brightness
- set_color
- set_channel
- write_channels
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
This patch adds support for the Texas Instruments LP5030 and LP5036
I2C LED controllers. They are respectively providing up to 30 and 36
channels (i.e. 10 or 12 RGB LEDs).
In addition to the channel/color registers this LED controller provides
a per-LED brigthness register. This driver implements both LED-based and
channel-based API methods:
- led_on
- led_off
- led_get_info
- led_set_brightness
- led_set_color
- led_set_channel
- led_write_channels
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The HT16K33 is a memory mapping, multifunction LED controller
driver. The controller supports up to 128 LEDs (up to 16 rows and 8
commons) and matrix key scan circuit of up to 13x3 keys.
This commit add support for the LED driver functionality of the
HT16K33.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add support for TI LP5562 I2C 4-channel LED driver.
Supported blinking period: 1ms - 1000ms
Supported brightness value: 0% - 100%
This driver supports the entire currently available API.
Signed-off-by: Johannes Hutter <johannes@proglove.de>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add support for NXP PCA9633 an I2C 4-bit LED driver.
Supported blinkink period: 41ms to 10667ms
Supported brightness value: 0 to 100%
This driver supports the following APIs:
1. led_blink
2. led_set_brightness
3. led_on
4. led_off
Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Add support for LED APIs for controlling the LED devices. This
API can be used by the LED devices present on the chip and connected
externally via buses like I2C, SPI etc...
Following APIs are currently supported:
1. led_blink
2. led_set_brightness
3. led_on
4. led_off
Driver support using these APIs will be added in subsequent patches.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Simon Guinot