Introducing the macro toolchain_cc_warning_error_implicit_int which,
abstracts the implicit_int error flag thus leaving it to the toolchain
to decide whether this flag is needed or not.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
The macros are named toolchain_cc_warning_error_misra_sane and
toolchain_cc_cpp_warning_error_misra_sane
These macros provide toolchain specific flag(s) relating to the MISRA
SANE configuration option.
The macros will place the flag(s) in a variable provided by caller,
which can then add to zephyr compile options.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
This is placeholder for extended warning flags, likely to change between
toolchains.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
This is placeholder for base warning flags, common to most toolchains.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
The introduced macros are placeholders for the cmake parameter warning
level.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
Modern versions of GDB support multiple architectures
with the same binary.
In fact, Ubuntu stopped shipping a gdb-arm-none-eabi
package, gdb-multiarch should be used instead.
This fixes a failure on those systems where otherwise CMAKE_GDB will be
assigned to CMAKE_GDB-NOTFOUND.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
toolchain_ld_base() represents flags that are fundamental to linking or
otherwise does not belong in any further specified linker flag category.
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When we build with newlib we don't set -nostdinc. In that case make
sure that we leave it to the toolchain to set the system include paths.
The one exception to leaving to the toolchain to set the system include
paths is the path to the newlib headers. Since we build
with -ffreestanding we need to make sure the newlib header path is the
before the toolchain headers. Otherwise the toolchain's 'freestanding'
headers get picked up and that causes issues (for example getting PRI*64
defined properly from inttypes.h due to __STDC_HOSTED__ being '0').
For newlib we accomplish this by having the only system header specified
by zephyr_system_include_directories() being just the newlib headers.
Note: for minlibc we leave things alone as things just happen to work as
the -I include of the libc headers takes precedence over -isystem so we
get the libc headers over the toolchain ones. For the newlib case it
appears that setting both -I and -isystem for the same dir causes the
-I to be ignored.
Fixes#14310
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- newlib needs c standard includes (so no -nostdinc)
- xcc needs toolchain headers (so no -nostdinc)
- with host gcc:
- x86_64 should not build with standard includes (-nostdinc needed)
- native_posix should build with standard include (no -nostdinc)
..
..
To simplify, abstract this and move it to compilers/toolchains and still
depend on what the application wants.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
XCC is based on xcc, but is nothing like gcc and his many differences.
Instead of ifdeffing the gcc code with Xcc specifics, maintain it
standalone.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce toolchain_cc_asm macro to capture toolchain specific flags
related to assembly.
-D_ASMLANGUAGE is kept common for all, assuming -D as define flag is
supported by all compilers (which is almost the case).
No functional change expected.
Clang's flags are compatible with gcc, and are thus inherited.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting easier porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Introduce toolchain_cc_cpp_*-family of macros.
Move the following into the toolchain_cc_cpp_* macros:
* Common base set of flags
* C++ standard version
* RTTI
* Exceptions
These macros must be implemented by every compiler port.
These macros set the respective flags, but leaves logic and control to
the root CMakeLists.txt file.
No functional change expected.
Clang's C++ flags are compatible with gcc, and are thus
inherited.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting easier porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Introduce toolchain_cc_optimize_for_* family of macros.
Each macro represents a general optimization class.
Each macro is then responsible for setting an output variable to that
class-of-optimization's flag.
The names of these output variables are decided from the root
CMakeLists.txt.
No functional change expected.
Clang's optimization flags are compatible with gcc, and are thus
inherited.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting easier porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
We were select host compiler from the generic gcc compiler section which
is used for cross toolchains. This arch should use the host-gcc compiler
definition instead.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
PR #9522 series ending with commit c2c9265b7d ("tests: cmsis: Disable
two cmsis portability tests on x86_64") added -mx32 support for the
x86_64 ARCH and qemu_x86_64. While this was implemented in
"compiler/gcc/target.cmake" as fall back from cross-compilation to the
host compiler, it worked with a direct ZEPHYR_TOOLCHAIN_VARIANT=host
too.
Later, -lgcc was added to "compiler/host-gcc/target.cmake" by PR #12674
to fix the -m32 x86 build. This broke the x86_64 build when using
ZEPHYR_TOOLCHAIN_VARIANT=host because even "multilib" packages usually
don't feature the -mx32 version of libgcc.
Fix this by excluding -lgcc in compiler/host-gcc/target.cmake just like
compiler/gcc/target.cmake always did for x86_64.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Introduce the first of the toolchain_cc-family of macros:
toolchain_cc_security_fortify and toolchain_cc_security_canaries.
No functional change expected.
Fortify source is not supported by Clang, but this commit retains
current behavior.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting easier porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Add missing -lgcc when compiling with ZEPHYR_TOOLCHAIN_VARIANT=host
merely copying some existing code from
'compiler/{clang,gcc}/target.cmake'.
This fixes compilation for the following boards with an x86
microprocessor:
galileo, minnowboard, qemu_x86, qemu_x86_nommu, up_squared,
up_squared_sbl
Compilation of the following boards with an X86_IAMCU microcontroller
still fail with a "cannot find -lgcc" error:
arduino_101, qemu_x86_iamcu, quark_d2000_crb, quark_se_c1000_devboard,
tinytile
This is _not_ a regression because these boards _already_ failed with
"undefined reference to __udivdi3" and other libgcc symbols.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
A GCC-based toolchain may require additional, toolchain-specific
values in CMAKE_REQUIRED_FLAGS to perform compiler checks properly,
but gcc.cmake clobbers any values the user provides.
Preserve them instead, allowing users to give their own compiler
checking flags at generation time.
The details for the particular issue that inspired this are described
in https://github.com/pulp-platform/pulpino/issues/240.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Host toolchains don't tend to provide an x32 libgcc. But we don't
actually need one for existing code. This is fragile, but better to
work for all but obscure cases than break outright.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Cosmetics, no functional change expected.
Fixed leading space alignment.
Replaced tabs with spaces.
Emulation error message output is now aligned.
To locate tabs in cmake, the following bash is useful:
grep -PRil "\t" * | grep -i cmake | grep -v ^sanity
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Split up the toolchain configuration into two phases, generic and
target. The 'generic' phase configures the toolchain just enough to be
able to preprocess DT files. The 'target' phase completes the
configuration with target-specific configuration.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Danny Oerndrup