Here are the main changes:
* board: Update EMSK onboard resources such as Button, Switch and LEDs
+ update soc.h for em7d, em9d, em11d
+ update board.h for em_starterkit board
* arc: Add floating point support and code density support
+ add kconfig configuration
+ add compiler options
+ add register definitions, marcos, assembly codes
+ fixes in existing codes and configurations.
* arc: Update detailed board configurations for cores of emsk 2.3
* script: Provide arc_debugger.sh for debugging em_starterkit board
+ make BOARD=em_starterkit debug
This will start openocd server for emsk, and arc gdb will connect
to this debug server, user can run `continue` command if user just
want to run the application, or other commands if debugging needed.
+ make BOARD=em_starterkit debugserver
This will start an openocd debugger server for emsk, and user can
connect to this debugserver using arc gdb and do what they want to.
+ make BOARD=em_starterkit flash
This will download the zephyr application elf file to emsk,
and run it.
Signed-off-by: Huaqi Fang <huaqi.fang@synopsys.com>
This patch changes Quark SE power drivers to support multicore scenarios
e.g. both LMT and ARC core are enabled and manage power.
Handling LPS states in multicore scenarios are dead simple because LPS
states are core-specific states. It means that putting the LMT core in
LPS doesn't affect the ARC core, and vice-versa. DEEP_SLEEP state, on
the other hand, affects both cores since it turns power off from the SoC
and both cores are shutdown. It means that if LMT puts the system in
DEEP_SLEEP, ARC core is shutdown even if it is busy handling some task.
In order to support the multicore scenario, this patch introduces the
SYS_POWER_STATE_DEEP_SLEEP_2 state to both ARC and x86 power drivers.
On ARC, this state works as following:
1) Save ARC execution context;
2) Raise a flag to inform the x86 core that ARC is ready to enter in
DEEP_SLEEP;
3) Enter in the lowest core-specific power state, which in this case is
LPSS.
On x86, DEEP_SLEEP_2 is very similar to DEEP_SLEEP. The difference relies
in the post_ops() which calls _arc_init() in order to start ARC core so
it can restore its context.
This patch also adds the test/power/multicore/ directory which provides
sample application to x86 and ARC cores in order to easily verify the
multicore support. In test/power/multicore/README.rst you can find more
details regarding the applications.
Jira: ZEP-1103
Change-Id: Ie28ba6d193ea0e58fca69d38f8d3c38ca259a9ef
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When going into DEEP_SLEEP mode, the ARC core now saves
its context. This includes:
- All core registers
- Stack pointer
- Program counter (restored by jumping to the restore code)
The arc reset code now checks if the GPS0 bit 2 is set.
This is similar to the behavior of the x86 core done by
the QMSI bootloader which is setting GPS0 bit 1 in order
to call the restore path instead of cold boot path.
The sample has been adapted in order to support the ARC.
Jira: ZEP-1222
Change-Id: I375f03b16b8a5fd1f07ead55cf7e4947d6290c9f
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Wayne Ren