to make use of Espressif's hal in order to ease both
driver maintenance and code reuse between socs.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
In the dma.h there is a dma_ctx structure using a magic code
to be identify. This structure must be prepared as a new
element of the dma_stm32_data.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This fixes/improves the rounding errors that are introduced
through the truncation of integer division.
Signed-off-by: Leonard Pollak <leonardp@tr-host.de>
This commit removes PHY and MDIO specific code from the ATSAM
Ethernet driver and instead relies on a separate PHY driver to
handle the PHY.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
This commit adds support for Ethernet PHY drivers via a PHY API.
It also includes a driver for a generic MII compliant PHY
which supports most PHYs on the market.
Separating PHY driver from the SoC specific Ethernet driver
simplifies the Ethernet driver code and enables code re-use.
Drivers for specific PHYs with more advanced features, such as
RGMII delay in PHY can be developed independent of the Ethernet
MAC driver.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Some GPIO related calls were not being checked for error.
This patch also fixes coverity issue 236651.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some GPIO related functions were not being checked for errors.
This patch fixes coverity issue 236653.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some GPIO related calls were not being checked for errors.
This patch fixes coverity issue 236650.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
gpio_add_callback was not being error-checked. Some other minor cleanups
(rc var to the top, remove redundant log).
This patch fixes coverity issue 236649.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some GPIO related calls were not being checked for error.
This patch fixes coverity issue 236648.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some GPIO related calls were not being checked for error.
This patch fixes coverity issue 236647.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix the formula used to compute RH/ticks formula according to the Table
9 of the datasheet.
This patch also fixes coverity issue 238360.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix the formula that computes T/ticks according to the details found on
Table 9 of the datasheet.
This patch fixes coverity issue 238343.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
I2S direction was not checked correctly in the i2s_nrfx_configure
function.
This patch also fixes coverity issue 238365.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add Digital-to-Analog Converter driver (based on DACC module) for Atmel
SAM MCU family. Only SAME70, SAMV71 series devices are supported in
this version.
Tested on Atmel SMART SAM E70 Xplained board.
Origin: Original
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Add sam4l full finite state machine based on Atmel Software Framework.
This allows driver detect protocol errors and sync all requests. This
version is compliance with Linux USB tests.
Note: Tests are timing sensitive and log may affect results.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The RISC-V Platform-Level Interrupt Controller (PLIC) was moved from the
RISC-V Privileged Specification v1.11 to a separate specification
(see https://github.com/riscv/riscv-plic-spec).
Reflect this by not automatically enabling the PLIC interrupt controller
driver for all RISC-V privileged SoCs, but only for SoCs with the
CONFIG_RISCV_HAS_PLIC Kconfig option enabled.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Follow up on commit bfd45e5b8c
("drivers: remove Kconfig option CONFIG_UART_CONSOLE_ON_DEV_NAME")
Remove Kconfig options
CONFIG_BT_UART_ON_DEV_NAME and CONFIG_BT_MONITOR_ON_DEV_NAME
since all UART drivers are converted to devicetree and we can just use
DEVICE_DT_GET(DT_CHOSEN(zephyr_bt_uart)) and
DEVICE_DT_GET(DT_CHOSEN(zephyr_bt_mon_uart)).
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Microchip MEC172x series I2C driver implementing controller
and target modes. The driver implemenents its own I2C port
pin control functions and does not depended upon pinmux. Future
updates will make use of PINCTRL when that subystem is finalized.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
After update of stm32 cube l1 V1.10.3,
SPI_CR2_FRF doesn't exist for all stm32L1 MCU,
thus LL_SPI_SetStandard() is also not defined for all stm32l1 MCU.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
This adds basic support for the Silabs Si7210 hall effect magnetic
position and temperature sensor. It is able to get magnetic field and
temperature in the default scale of the sensor (depending on the
variant). It also supports going into sleep mode without measurements
through the device power management infrastructure.
It is most notably missing support for scale change, measurement
averaging and filtering, and alert pin configuration (threshold,
hysteris, tamper).
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
the correct value is returned when using sensor channel get function to
read z-axis value
Signed-off-by: Vojislav Milivojevic <milivojevicvoja@yahoo.com>
Reduce interval of warning timer, so we can print more
warning messages (ex. MEPC, task ID...) before watchdog reset.
Signed-off-by: Ruibin Chang <ruibin.chang@ite.com.tw>
We add disable event timer at the beginning of critical section
for two reason:
1.For K_TICKS_FOREVER case: since no future timer interrupts
are expected or required, so we disable the event timer.
2.Others case: according it81202 spec, when timer enable bit
from 0->1, the timer will reload counts and start countdown.
Signed-off-by: Ruibin Chang <ruibin.chang@ite.com.tw>
On STM32WL, HSE clock can take 2 specific options:
-hse-tcxo
-hse-div2
Enable support for these options.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The conversion to devicetree seems to be half lost
for this driver. There are already bindings and nodes for
compatible "altr,jtag-uart", update driver to use it.
Remove last mention of CONFIG_UART_CONSOLE_ON_DEV_NAME.
Resolves#37207
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove CONFIG_UART_MCUMGR_ON_DEV_NAME and use
DEVICE_DT_GET(DT_CHOSEN(zephyr_uart_mcumgr)).
Add usb.overlay, which contains chosen node and cdc-acm-uart node,
to smp_svr sample.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove device_get_binding(CONFIG_UART_CONSOLE_ON_DEV_NAME)
and use DEVICE_DT_GET(DT_CHOSEN(zephyr_console)) to get
chosen "zephyr,console" node.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This adds support for the TI INA219 Zero-Drift, Bidirectional
Current/Power Monitor with I2C Interface
Signed-off-by: Leonard Pollak <leonardp@tr-host.de>
bugfix: NULL termination is required by
dns_resolve_reconfigure API so null terminate the DNS
server list.
Fix checkpatch warning.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Include sys/atomic.h instead of sys/atomic_builtin.h, so that build for
platforms with non-default atomic implementation will still succeed.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Glauber Maroto Ferreira