This allows the serial driver to be excluded from the build.
Change-Id: Ibd65cea07e753de0d452879bfdac8f3a421db5e7
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Removes the non-PIC disabling PIC code as the PIC is not a supported interrupt
controller. The PIC disabling code remains as it is needed to prevent the
generation of spurious interrupts from the PIC (see CONFIG_SHUTOFF_PIC).
Change-Id: Ic59aa17ab96f34685a5d7b5f24cab391de47edca
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Renames the menu to "Processor Capabilities" as it is both more concise and
it gives a more "consistent feel" to the menu names (referring to the platform
equivalent "Platform Capabilities".)
Change-Id: I1f835e11e382f811720c17e194b4bf410ef74d31
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Reduces redundancy in the x86 Kconfig menus.
Change-Id: I90ff7d6aedda2aa02528b6821eeaf7eb6bea321c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The Kconfig option PROT_MODE_SWITCH_PROMPT was being used to conditionally
display the "Boot Sequence Options" Kconfig menu. It is simpler to include
both PROT_MODE_SWITCH and its dependent BOOT_A20_ENABLE in the parent menu.
However, doing so necessitates that the name of the parent menu be changed
from "Bootloader Options" to "Boot Options".
Change-Id: I9b9a074a0d4ec5209f5349b42178409c73875b00
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the order of the floating point options so that the SSE Kconfig options
are not interspersed with the floating point options.
Change-Id: I8390b5049f95b3088e7abf48bf492a544e7f5f50
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
It makes more sense to have the x86 Kconfig options CPU_FLOAT_UNSUPPORTED
and CPU_SSE_UNSUPPORTED to be selected by the CPU than have those options
dependent upon the selected CPU.
Change-Id: I862baabee6a81cc79206c37a50b8594354a40403
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
There is no need for any x86 Kconfig to have a dependency upon the following
Kconfig options as they are always true when building for ARCH=x86.
X86_32
ISA_IA32
ARCH="x86"
Change-Id: I810e9712589199871953f043e8be746ab03230f8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Uses tabs instead of spaces for consistency.
Change-Id: Ic85b710dc7f667f9b28b97839f020921afe13f3f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The Kconfig option HARDWARE_BP_SUPPORTED is not used.
Change-Id: Ifed886f733e8125ef1c45926e46e31ff48d06316
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The top-level menus "x86 Core Options" and "Bus Options (PCI etc.)" are now
sub-menus to the the top-level menu "General Platform Configurations".
Also, the "Board Capabilities" sub-menu has been hoisted out of the
"x86 Core Options" menu and placed as a renamed sub-menu
(Platform Capabilities) to the top-level "General Platform Configurations"
menu.
This helps to create a more logical flow when using "make menuconfig".
Change-Id: I3a837b039eb735ec4073a1721f00753705fba020
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Combines the following Kconfig options to create PLATFORM_IA32:
PLATFORM_GENERIC_PC
PLATFORM_PCMINUTEIA
PLATFORM_ATOM_N28XX
The new name aligns with the 'arch/x86/platforms/ia32' platform directory.
Change-Id: I4474cb43040f888d5164382184c27bbb38527440
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
1. The new name aligns with the 'arch/x86/platforms/ia32_pci' platform
directory.
2. A shorter prompt works better with menuconfig.
3. Removes IOAPIC selection as HPET_TIMER selection makes it implicit.
4. Removes LINK_AUX_COMPILER_LIBS selection as it does not exist.
5. Removes CPU_MINUTEIA selection to permit CPU_ATOM as a valid choice.
Change-Id: I55694d2594a103f4f5ca233c279df0556ff1327f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This commit removes the ADVANCED_IDLE and ADV_IDLE_STACK_SIZE
Kconfig symbols.
This Kconfig symbols were defined in arch/x86/Kconfig and
kernel/microkernel/Kconfig as well.
Change-Id: I17cc28cdf6f07c8a85acad7318b2b4ce6a06f4bc
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
In order to work reliably on QEMU and not depend on the
host CPU frequency change basic_atom configuration to use HPET.
Change-Id: I1253a0224bcbff4a7d54406b089c29b5ace32080
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Changes the the names of the x86 platforms so that they are more generic.
generic_pc -> ia32
quark -> ia32_pci
NOTE: it is expected that the two platforms will eventually be merged into one.
one. At present, the two platforms support different hardware. For example,
the ia32 supports bluetooth whereas the ia32_pci does not, and the ia32_pci
supports both PCI and HPET whereas the ia32 does not.
Change-Id: I8a980aaef55be8c59f7d19ddeb7fafbf11253408
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes CONFIG_CPU_PENTIUM4 and CONFIG_PLATFORM_PENTIUM4 as Zephyr does not
support the Pentium4.
Change-Id: Ieb1970894eda184f4c33d03e3563fb08f861ec6c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates Kconfig option names as part of transforming BSPs to platforms.
Change-Id: If397bcac8b058e5700e82c3cabbfe64588316d1d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
More bootloader options moved to 1 single menu.
Change-Id: I6908de8e26b4a15617ad5aa738c9dc2a928ad6a4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The options were seen in the top level menuconfig menu, gather
them under a the Bus menu. This includes the PCI option itself
and any related options.
Change-Id: Ib09e2ed0c35dca5ad1c2e086d0f4a479a847291f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make device drivers use static interrupt registration procedure.
DYNAMIC_INT_STUBS configuration parameter was used only by device
drivers to switch between static and dynamic interrupt registration
procedures. Now it is obsolete and is removed.
uart_int_connect() function is removed. If UART device driver still
needs to register interrupt dynamically, it should use
irq_connect(uart_irq_get()).
Change-Id: I80c695f337456e9b0c1b0fd56716e35794f7bdb7
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
In order to provide the same irq_connect() on all platforms
on x86, irq_connect() now uses a static array of interrupt
stubs. Device driver does not need to provide interrupt stub
to irq_connect() function.
Add NUM_DYNAMIC_STUBS configuration parameter, the number
of interrupt stubs used for dynamic interrupt registration.
Modify tests for unified interrupt register API
Tests that deal with interrupts are modified to work
with the new interrupt registration API.
Add CONFIG_NUM_DYNAMIC_STUBS option to dynamic interrupt projects
Projects that use dynamic interrupt handler registration on x86
have to include CONFIG_NUM_DYNAMIC_STUBS parameter in the
configuration.
Change-Id: Ic90c726485521a57cf695fd3edc8cac85d0b827d
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Atom based BSPs now select an atom processor.
Change-Id: Iebe90a60d9e7f2025ce6b23fe918b86cd11fdea7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Some files were left in bsp/ after a failed rebase.
Change-Id: I26d34387d751ddd831b2dfef5c8cb6a1a8904b3c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
After moving the driver code out of the bsp directory all the code
that remains is common to all x86 platforms move the code and
assocoated config variables to arch/x86.
Change-Id: I76617070bb165fd157f0c3a127f1b9829b86c283
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Remove ARM specific driver that duplicates the platform
independent one.
Rename x86 specific driver to make it unique.
Added configuration options for random and non-random
number generators.
Change-Id: Ie1b277d2927cdfe877650ae09134db7c86becb76
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This commit fixes the "randmon" typo in the
x86 Kconfig file.
Change-Id: Ic88a4e971dc2e21b9885d591ad6949aebed6b48d
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit add license headers to Kconfig files.
Change-Id: I79e60263b8c7b696463ecc84b8ad411af5415117
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit add the Kconfig symbol SSE_FP_MATH.
Change-Id: I565a5a4665edbe72b40eb1e48a3279af98523034
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds the Kconfig files that describe the CONFIG
symbols that belongs to the arch directory and subdirectories.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I744225ddaa5e2b45113ca049457a8f9925ebe4c2
Daniel Leung