The board name for the nRF52840 Dongle, so far known as
nrf52840_pca10059, is renamed to nrf52840dongle_nrf52840. Its
documentation and all references to its name in the tree are updated
accordingly. Overlay and configuration files specific to this board are
also renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The board name for the nRF52833 DK, so far known as nrf52833_pca10100,
is renamed to nrf52833dk_nrf52833. Its documentation and all
references to its name in the tree are updated accordingly.
Overlay and configuration files specific to this board are also
renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The board target for emulation of nRF52810 on nRF5DK, so far
known as nrf52810_pca10040, is renamed to nrf52dk_nrf52810.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Convert driver to use DT_INST macros and remove related board per
instance Kconfig symbol usage.
Also update counter_basic_api test to use DT_INST and remove the
udoo_neo_full_m4.conf as its not longer needed since the per instance
Kconfig sybmols don't exist anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use DT_INST macros and remove related board per
instance Kconfig symbol usage.
Additionally remove udoo_neo_full_m4.conf from gpio_basic_api test since
the Kconfig symbols don't need to be set anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The net_buf subsystem is now fully compatible with the new timeout
API, so move the selection of the legacy API to those specific
subsystems that use net_buf and still need converting.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add additional build configurations to the shell to catch build errors
when enabling extended advertising.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Kconfig options that enable I2C and SPI instances are no longer used
in nRF drivers. Remove all assignments done to these options in related
board definitions, samples, and tests.
For nrf52_pca20020, also no longer needed setting of default values
for GPIO_SX1509B* options is removed (now the gpio_sx1509b driver is
enabled by default when a corresponding devicetree node is enabled).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Remove prompts from Kconfig options `UART_x_NRF_UART*` that select
the type of nrfx driver (for UART or UARTE peripheral) to be used
for a given instance. This prevents the options from being modified
from configuration files.
Instead, make one of these options selected by default according to the
"compatible" property set for the corresponding UART node in devicetree.
This eliminates the need of changing both the "compatible" property in
devicetree and the Kconfig option selecting the driver type when a user
wants to switch between UART and UARTE for a given instance.
Since all `UART_x_NRF_UART*` options are made "hidden" by this commit,
all their occurrences in configuration files are removed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Even though radio driver can report in its capabilities that it does
support CSMA CA, there's no way in the driver to select how the frame
should be transmitted (with CSMA or without). As layers above radio
driver (Thread, Zigbee) can expect that both TX modes are available, we
need to extend the API to allow either of these modes.
This commits extends the API `tx` function with an extra parameter,
`ieee802154_tx_mode`, which informs the driver how the packet should be
transmitted. Currently, the following modes are specified:
* direct (regular tx, no cca, just how it worked so far),
* CCA before transmission,
* CSMA CA before transmission,
* delayed TX,
* delayed TX with CCA
Assume that radios that reported CSMA CA capability transmit in CSMA CA
mode by default, all others will support direct mode.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
PWM and other flags were missing for PCA10059.
Aligned also RAM and Flash while comparing the files.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
This commit enables nested interrupt test for the Cortex-R platforms
that use the ARM Generic Interrupt Controller (GIC).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Use the appropriate K_SECONDS() or K_MSEC() macros to pass a timeout to
k_sleep() and other kernel APIs.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
And implement DT_ANY_INST_ON_BUS() in terms of it.
This makes some error messages quite a bit shorter by avoiding
UTIL_LISTIFY(), which has a nasty temper and tends to explode if not
treated gently.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The timer counter for ticks on MEC1501 SoC is based on the RTOS
timer which runs at 32kHz. This is too slow for timing benchmarks
as most cases can be finished within one or two ticks. Since
the SoC has higher frequency timers running at 48MHz, add
the necessary bits to use these for timing benchmarks.
Fix#23414
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add support for "absolute" timeouts, which are expressed relative to
system uptime instead of deltas from current time. These allow for
more race-resistant code to be written by allowing application code to
do a single timeout computation, once, and then reuse the timeout
value even if the thread wakes up and needs to suspend again later.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add a CONFIG_TIMEOUT_64BIT kconfig that, when selected, makes the
k_ticks_t used in timeout computations pervasively 64 bit. This will
allow much longer timeouts and much faster (i.e. more precise) tick
rates. It also enables the use of absolute (not delta) timeouts in an
upcoming commit.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add a k_timeout_t type, and use it everywhere that kernel API
functions were accepting a millisecond timeout argument. Instead of
forcing milliseconds everywhere (which are often not integrally
representable as system ticks), do the conversion to ticks at the
point where the timeout is created. This avoids an extra unit
conversion in some application code, and allows us to express the
timeout in units other than milliseconds to achieve greater precision.
The existing K_MSEC() et. al. macros now return initializers for a
k_timeout_t.
The K_NO_WAIT and K_FOREVER constants have now become k_timeout_t
values, which means they cannot be operated on as integers.
Applications which have their own APIs that need to inspect these
vs. user-provided timeouts can now use a K_TIMEOUT_EQ() predicate to
test for equality.
Timer drivers, which receive an integer tick count in ther
z_clock_set_timeout() functions, now use the integer-valued
K_TICKS_FOREVER constant instead of K_FOREVER.
For the initial release, to preserve source compatibility, a
CONFIG_LEGACY_TIMEOUT_API kconfig is provided. When true, the
k_timeout_t will remain a compatible 32 bit value that will work with
any legacy Zephyr application.
Some subsystems present timeout (or timeout-like) values to their own
users as APIs that would re-use the kernel's own constants and
conventions. These will require some minor design work to adapt to
the new scheme (in most cases just using k_timeout_t directly in their
own API), and they have not been changed in this patch, instead
selecting CONFIG_LEGACY_TIMEOUT_API via kconfig. These subsystems
include: CAN Bus, the Microbit display driver, I2S, LoRa modem
drivers, the UART Async API, Video hardware drivers, the console
subsystem, and the network buffer abstraction.
k_sleep() now takes a k_timeout_t argument, with a k_msleep() variant
provided that works identically to the original API.
Most of the changes here are just type/configuration management and
documentation, but there are logic changes in mempool, where a loop
that used a timeout numerically has been reworked using a new
z_timeout_end_calc() predicate. Also in queue.c, a (when POLL was
enabled) a similar loop was needlessly used to try to retry the
k_poll() call after a spurious failure. But k_poll() does not fail
spuriously, so the loop was removed.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Kernel timeouts have always been a 32 bit integer despite the
existence of generation macros, and existing code has been
inconsistent about using them. Upcoming commits are going to make the
timeout arguments opaque, so fix things up to be rigorously correct.
Changes include:
+ Adding a K_TIMEOUT_EQ() macro for code that needs to compare timeout
values for equality (e.g. with K_FOREVER or K_NO_WAIT).
+ Adding a k_msleep() synonym for k_sleep() which can continue to take
integral arguments as k_sleep() moves away to timeout arguments.
+ Pervasively using the K_MSEC(), K_SECONDS(), et. al. macros to
generate timeout arguments.
+ Removing the usage of K_NO_WAIT as the final argument to
K_THREAD_DEFINE(). This is just a count of milliseconds and we need
to use a zero.
This patch include no logic changes and should not affect generated
code at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This commit adds a filter to restrict the `arch/arm/arm_runtime_nmi`
test to the ARM Cortex-M platforms only, since this test currently
does not support the Cortex-A and Cortex-R platforms.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit enables nested interrupt test for the Cortex-A platforms
that use the ARM Generic Interrupt Controller (GIC).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the nested interrupt testing support for the ARM
Generic Interrupt Controller (GIC).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
We rename the nRF91 Dev Kit board target (nrf9160_pca10090)
to nrf9160dk_nrf9160. We update all associated references
in the supportive documentation and all nRF9160-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds an explanation comment for the interrupt priorities
used by the Cortex-M nested interrupt test.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Do not attempt to build on all boards. Instead, do a build-only pass
of the generic test case on all boards with EEPROM support.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove the dts_fixup.h with a DTS app overlay file instead. We have
sensors that show up on both the I2C and SPI busses, and we disable
the sensors to match how the tests work currently.
The app.overlay utilizes the testing dts bindings to create test nodes
that should not conflict with any existing SoC nodes. Thus allowing the
test to run on any platform.
The dts overlay is structured such that i2c.dtsi and spi.dtsi are
generated with default values for required properties. We than update
device properties for those nodes that the defaults are sufficient for
one reason or another.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Deprecate BT_LE_ADV defines in hci.h that are expected to be used by the
application in the scan received callback to identify the advertising
PDU type. These defines are mixing HCI input parameters and advertising
PDU types. Internally it is acceptable to mix these, but at the API we
should to mix in them.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Deprecate bt_create_conn_le and rename it to in order to add return
code, new arguments and to follow the established naming convention.
Add API for the application to control the scan parameters of the
initiator role. This allows the application more scheduling control
of the initiator in multi-role scenarios. Also provides options to
configure the initiator for LE Coded PHY for long range support.
We deprecate the old way of creating connection to make the name more
consistent with the rest of the API.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Identify when received PUBLISH message is malformed and overall packet
length received is smaller than parsed variable header lenght.
Add unit test to cover this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The standard allows up to 4 bytes of packet length data, while current
implementation parsed up to 5 bytes.
Add additional unit test, which verifies that error is reported in case
of invalid packet length.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The following commit:
commit 407b49b35c (refs/bisect/bad)
Author: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Date: Wed Feb 12 15:00:46 2020 +0100
cmake: use find_package to locate Zephyr
breaks as we don't find the ZephyrUnittest package. For now revert to
the old means until a proper fix can be made.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit disables the nested interrupt test for the RISC-V platform,
as interrupt nesting is not supported on the current RISV-C
architecture port.
Furthermore, the current `trigger_irq` implementation for RISC-V is
mostly incorrect and cannot be used, so there is no point in leaving
that in the codebase (see #23593).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The current nested interrupt test implementation is both buggy and
fundamentally flawed because it does not trigger a higher priority
interrupt from a lower priority interrupt context and relies on the
system timer interrupt, which is not fully governed by the test;
moreover, the current implementation does not properly validate the
test results and can report success if no interrupt is triggered and
serviced at all.
This commit reworks this test to have the following well-defined
and logical procedure:
1. [thread] Trigger IRQ 0 (lower priority)
2. [isr0] Set ISR 0 result token and trigger IRQ 1 (higher priority)
3. [isr1] Set ISR 1 result token and return
4. [isr0] Validate ISR 1 result token and return
5. [thread] Validate ISR 0 result token
The reworked test scenario ensures that the interrupt nesting works
properly and any abnormal conditions are detected (e.g. interrupts not
triggering at all, or ISR 1 not being nested under ISR 0).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit re-organises the kernel interrupt tests for consistency.
In addition, it removes any references to the `irq_offload` feature,
which is no longer used by this test.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Changing ZEPHYR_BASE throughout Zephyr tests and samples revealed that
intel s1000 crb cache test case could not be run on CI.
This has now been fixed by moving the tests file located in
tests/board/intel_s1000_crb folder into tests/board/intel_s1000_crb/main
instead so there is now main and cache folders with test projects.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
By changing the various *NET_DEVICE* macros. It is up to the device
drivers to either set a proper PM function or, if not supported or PM
disabled, to use device_pm_control_nop relevantly.
All existing macro calls are updated. Since no PM support was added so
far, device_pm_control_nop is used as the default everywhere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The board target for emulation of nRF52811 on nRF52840 DK, so far
known as nrf52811_pca10056, is renamed to nrf52840dk_nrf52811.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Carles Cufi