zperf takes a potentially unaligned netowrk packet, casts it to a
struct, and then dereferences the fields. This causes a crash on
cores that don't support unaligned access such as the Cortex-M0+.
Use the UNALIGNED_GET helper instead.
Signed-off-by: Michael Hope <mlhx@google.com>
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
If we ran out of net_buf's while sending, ignore the issue
and try to finish the test instead. Solving the "running out
of network buffers" case would require careful tuning of
number of network buffers, buffer size, upload speed etc. which
is difficult to solve with generic buffer count options.
The user should tweak mainly the CONFIG_NET_BUF_TX_COUNT option.
Optionally CONFIG_NET_PKT_TX_COUNT can be changed too. Information
about these options is printed to console after the test is finished.
Fixes#20315
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the iPerf2 protocol is not documented properly, depend on
exact iPerf 2.0.5 version when testing.
Fixes#20313
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Sample applications for display functions do not work on native_posix_64
due to missing overrides. Clone the native_posix_64 Kconfig override
for all samples that have a native_posix Kconfig override.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Allow for including arbitrary data in net_icmpv6_send_echo_request()
that will be echoed verbatim by the receiver.
This allows to use ICMP echo for diagnostic use cases, e.g. by testing
packet framentation (large payload) or measuring round-trip-time.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
main function is not necessary.
And without main here, it is possible to import these
samples zperf files in another project.
Signed-off-by: Bub Wei <bub.wei@unisoc.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Clarify what iPerf version was used when testing this sample
application. It was iPerf 2.0.9 which worked ok, for example
iPerf 2.0.13 did not work properly with UDP uploader (client)
mode.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Try to construct a proper iperf client header to the payload
as the server expects that. It is not sure if this is needed
or correct as there is no proper documentation for the iPerf2
protocol.
Fixes#14665
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Try to construct a proper iperf client header to the payload
as the server expects that. It is not sure if this is proper
way to do the iperf header as there is no documentation about
iPerf protocol anyway (except the iPerf source code).
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
`CONFIG_NET_L2_BT` no longer forces required BT configuration, but
depends on a user to set a valid configuration instead. Hence, we
need to select a proper configuration in the overlay config file.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
And also to the relevant callbacks.
That parameter is not used anywhere so it is useless.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy - and unrelated - function named net_pkt_get_data has
been removed, we can rename net_pkt_get_data_new relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy functions are removew, let's rename the new functions by
removing the _new suffix.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to build the net_pkt, just send the buffer directly.
Let's reuse already parsed ip/proto headers as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As there is no shell submodules any more, the "zperf" command
needs to be written in every command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Port all users of 'set_conf_file' to use the built-in rules
instead. This follows the convention-over-configuration principle to
make the system as a whole simpler and more consistent.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
It is planned to deprecate SHELL_CREATE_STATIC_SUBCMD_SET macro
which is replaced by SHELL_STATIC_SUBCMD_SET_CREATE.
Additionally, removed irrelevant comments about alphabetical
ordering which is no longer needed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Use the state machine states to determine if the session has ended.
This way zperf will properly reply stat packet to remote client even if
duration of the session is non zero.
Also we don't need to update counter (received packet number) at end of
the session.
Note: if id < 0, it means session end, otherwise it's session ongoing.
(id is the first feild of application data from remote client).
Signed-off-by: Bub Wei <bub.wei@unisoc.com>
If status is 0, both ip_hdr and proto_hdr will own a pointer to the
relevant IP and Protocol headers. In order to know which of ipv4/ipv6
and udp/tcp one will need to use respectively net_pkt_family(pkt) and
net_context_get_ip_proto(context).
Having access to those headers directly, many callbacks will not need
to parse the packet again no get the src/dst addresses or the src/dst
ports. This will be change after this commit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Considering that IP can be set dynamically by DHCP
or statically before test previously, we could have
alternative way by supporting both setting IP and
existing IP.
Signed-off-by: Bub Wei <bub.wei@unisoc.com>
Remove network specific default and max log level setting
and start to use the zephyr logging values for those.
Remove LOG_MODULE_REGISTER() from net_core.h and place the
calls into .c files. This is done in order to avoid weird
compiler errors in some cases and to make the code look similar
as other subsystems.
Fixes#11343Fixes#11659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removed printing command help from help handler. It is now
realized by the shell engine. This change saves a lot of flash
but still allows to print help in command handler with function
shell_help_print.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing help "options" from shell API.
Currently SHELL_OPT macro is not used by users. What is more
commit: a89690d10f ignores possible options created in
command handler by the user. As a result they are not printed
in help message.
Second, currntly implemented "options" in command handlers options are
implemented without SHELL_OPT macro.
And last but not least this change will allow to implement
help handler in a way that user will not need to think about calling
functions printing help in a command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Rephrase some help messages to decrease flash usage.
Deactivate shell history feature for test test_netusb_rndis
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
We are not expecting forever k_sleep in multithreading.
And k_sleep is empty in non-multihreading.
So remove invalid forever sleep to avoid the below issue.
ASSERTION FAIL [duration != (-1)] @ zephyr/kernel/sched.c:807
Please refer to _impl_k_sleep api in zephyr/kernel/sched.c:807
Signed-off-by: Bub Wei <bub.wei@unisoc.com>
context4/6 is initilalized in net_context_get function
which is restricted under CONFIG_NET_IPV4/IPV6 with
IS_EANBLED macro. So add the same macro check for
net_context_put function to avoid NET_ASSERT(context).
Signed-off-by: Bub Wei <bub.wei@unisoc.com>
If NET_IPV6 is disabled, build issue happens as below.
zephyr/samples/net/zperf/src/zperf_tcp_receiver.c: In function ‘zperf_tcp_rx_thread’:
zephyr/samples/net/zperf/src/zperf_tcp_receiver.c:171:9: error: ‘in6_addr_my’ undeclared (first use in this function)
&in6_addr_my->sin6_addr);
^~~~~~~~~~~
zephyr/samples/net/zperf/src/zperf_tcp_receiver.c:171:9: note: each undeclared identifier is reported only once for each function it appears in
zephyr/samples/net/zperf/src/zperf_tcp_receiver.c: In function ‘zperf_tcp_receiver_init’:
zephyr/samples/net/zperf/src/zperf_tcp_receiver.c:250:3: error: ‘in6_addr_my’ undeclared (first use in this function)
in6_addr_my = zperf_get_sin6();
^~~~~~~~~~~
*** [CMakeFiles/app.dir/src/zperf_tcp_receiver.c.obj] error 1
*** [CMakeFiles/app.dir/all] error 2
Signed-off-by: Bub Wei <bub.wei@unisoc.com>
Michael Hope