Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
We rename the nRF51 Dev Kit board target (nrf51_pca10028)
to nrf51dk_nrf51422. We update all associated references
in the supportive documentation and all nRF51-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Allocates segmented message buffers as slabs in a common pool for RX and
TX. This reduces memory requirements for both TX and RX, as TX messages
can be stored without the network and advertising buffer overhead, and
RX can use only the slabs it needs, instead of allocating a full size
segmented message. This approach also removes the need for decrypting
the segments for each retransmission, reducing overall processing load.
Slab based segmentation for tx also introduces queuing of segmented
messages, which allows the application layer to send multiple messages
to the same destination without violating Bluetooth Mesh specification
v1.0.1, section 3.6.4.1. This mechanism is provided through a flag that
blocks segmented messages to a destination which a message is already
being sent to until the previous message finishes.
This changes the SDU size configuration to a symmetrical
RX_SEG_MAX/TX_SEG_MAX pair of configurations, plus a new segment pool
side configuration. It also removes the binding between the TX_SEG_MAX
config and the advertising buffers, reducing the minimum advertising
buffer count from 6 to 3.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Use the new API and replace the enable/disable callback calls with pin
interrupt configuration instead.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
A recent patch changed the default ISR stack size for bbc_microbit
which causes this app to consume more RAM than is available. Fix this
by specifying an explicit stack size.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The seasonal overhaul of test identifiers aligning the terms being used
and creating a structure. This is hopefully the last time we do this,
plan is to document the identifiers and enforce syntax.
The end-goal is to be able to generate a testsuite description from the
existing tests and sync it frequently with the testsuite in Testrail.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Test for bbc_microbit was failing due to RAM usage. Reduced main
stack size and turned off temperature algorithm to fit.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Tick rate is becoming a platform tunable in the tickless world. Some
apps were setting it due to requirements of drivers or subsystems (or
sometimes for reasons that don't make much sense), but the dependency
goes the other way around now: board/soc/arch level code is
responsible for setting tick rates that work with their devices.
A few tests still use hard-configured tick rates, as they have
baked-in assumptions (like e.g. "a tick will be longer than a
millisecond") that need to be addressed first.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Introduce a separate buffer pool for events which the HCI driver
considers discardable. Examples of such events could be e.g.
Advertising Reports. The benefit of having such a pool means that the
if there is a heavy inflow of such events it will not cause the
allocation for other critical events to block and may even eliminate
deadlocks in some cases.
Also update all mesh samples not to specify explicit RX buffer counts
anymore. Instead, create appropriate defaults in Kconfig so that we
only need to override this in the app for cases like the bbc:microbit
with limited memory.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We use the following commands to rename any
SW._GPIO_{CONTROLLER,PIN,FLAGS} to
DT_ALIAS_SW._GPIOS_{CONTROLLER,PIN,FLAGS}
git grep -l SW._GPIO_CONTROLLER | xargs sed -i 's/SW\(.\)_GPIO_CONTROLLER/DT_ALIAS_SW\1_GPIOS_CONTROLLER/g'
git grep -l SW._GPIO_PIN | xargs sed -i 's/SW\(.\)_GPIO_PIN/DT_ALIAS_SW\1_GPIOS_PIN/g'
git grep -l SW._GPIO_FLAGS | xargs sed -i 's/SW\(.\)_GPIO_FLAGS/DT_ALIAS_SW\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move gpio.h to drivers/gpio.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This adds common option to disable support for LE Data Length Update
procedure in controller and host.
This will reduce flash usage by compiling out le_data_len_change
event handler that will never be called if controller has been
compiled with BT_CTLR_DATA_LENGTH option disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds common option to disable support for PHY Update
procedure in controller and host.
This will reduce flash usage by compiling out le_phy_update_complete
event handler that will never be called if controller has been
compiled with BT_CTLR_PHY option disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Move the GPIO info for the buttons into the dts, this lets us match what
all other boards are doing. Update some sample & test code to use the
dts generated SW0_GPIO_CONTROLLER define instead of SW0_GPIO_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The number of buffres influences e.g. the maximum SDU size, which in
turn influences call stack consumption. Use lower values where a high
number of buffers isn't necessary, and use the default (6) where it's
sufficient.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Minimal driver for ILI9340 LCD display driver including support
for adafruit 2.2" LCD display (1480)
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Keeping the model struct same sized, change the element pointer to two
indexes, and add a flags member that will be used to track pending
storage actions.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert the mesh code to use the new net_buf_siple APIs. This has the
benefit of saving 4 bytes off the stack due to the not needed pointer.
Also update the publication context helpers to map to the new
net_buf_simple API in an intuitive way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes it possible to pass all IV Update tests without having to
build a custom configuration for some of the tests. We also disable
the feature in all sample configurations, but leave it on in the
tests.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The app was declaring model publication contexts but missing buffers
for the publication messages.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The only generally available model supporting publication that's
convenient to be used for testing is the Health Server Model.
Unfortunately since this model supports period publication, the
non-periodic side got less attention and had some bugs.
The first thing that needs to be done is to verify that the period
returned by bt_mesh_model_pub_period_get() is positive. If it's zero
then no periodic publication should take place.
Another thing that this patch cleans up is the naming of the callback
used for periodic publishing. There's no need do require the callback
to call bt_mesh_model_publish() since this must happen no matter what,
so instead rename the callback from 'func' to 'update' and have the
access layer call bt_mesh_model_publish() if the callback was
successful.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Model publication was broken in a couple of ways:
- The Publish Retransmit State was not taken into account at all
- Health Server used a single publish state for all elements
To implement Publish Retransmit properly, one has to use a callback to
track when the message has been sent. The problem with the transport
layer sending APIs was that giving a callback would cause the
transport layer to assume that segmentation (with acks) is desired,
which is not the case for Model Publication (unless the message itself
is too large, of course). Because of this, the message sending context
receives a new send_rel ("Send Reliable") boolean member that an app
can use to force reliable sending.
Another challenge with the Publish Retransmit state is that a buffer
is needed for storing the AppKey-encrypted SDU once it has been sent
out for the first time.To solve this, a new new net_buf_simple member
is added to the model publication context. The separate 'msg' input
parameter of the bt_mesh_model_publish() API is removed, since the
application is now expected to pre-fill pub->msg instead.
To help with the publishing API change, the Health Server model gets a
new helper macro for initializing the publishing context with a
right-sized publishing message.
The API for creating Health Server instances is also redesigned since
it was so far using a single model publishing state, which would
result in erratic behavior in case of multiple elements with the
Health Server Model. Now, the application needs to provide a unique
publishing context for each Health Server instance.
The changes are heavily intertwined, so it's not easily possible to
split them into multiple patches, hence the large(ish) patch.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It may be useful for the app to know what the initial NetKeyIndex that
it was given during provisioning is.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is in anticipation of soon adding health client support, which
could then cause confusion due to the ambiguous API names.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that there's support for configuration client as well, rename cfg
to cfg_srv to avoid any confusion.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add the ability to track the provisioning bearer through an extra
parameter to link_open/close. Also introduce new public functions to
enable/disable specific provisioning bearers. This also means that one
now needs to explicitly enable provisioning bearers after calling
bt_mesh_init().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The needed options to QEMU_EXTRA_FLAGS now get set from a single
central place, so applications don't need to do it anymore.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use the default values for scan latency and receive delay, and enable
useful logging, like that for LPN.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The default of the stack is now to automatically enable LPN
functionality after a given timeout.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Carles Cufi