This symbol was removed in commit 748f724d82 ("serial: dts: remove
!HAS_DTS related Kconfig"). The setting should come from DTS now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The UART_NRF5_BAUD_RATE Kconfig symbol was removed in commit
748f724d82 ("serial: dts: remove !HAS_DTS related Kconfig"). Looks
like this has been moved to DTS.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Cover the required steps to use the Controller with Linux's BlueZ and
QEMU, and link to the relevant sections in the subsystem developer
guide.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
It is only necessary to link with subsys__bluetooth if the path
"subsys/bluetooth" is needed as an include directory. None of the
samples have this need.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Whenever a buffer is sent to the driver via bt_raw using bt_send() the
buffer might not be consumed if an error is returned. In that case
unreference the buffer to avoid leaking the already allocated net_buf.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
bbc_microbit has been observed to regress on this sample and is
therefore a good candidate for CI.
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Rename the BT_CONTROLLER prefix used in all of the Kconfig variables
related to the Bluetooth controller to BT_CTLR.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since the controller comes with a transmit buffer size that mirrors the
maximum size of a transmit packet, use that to size the buffers that are
used in the hci_uart application to receive packets from the Host over
the UART.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
With the introduction of privacy, the system workqueue is now being
linked into the image, growing the RAM footprint considerably.
In order for the sample to fit in QFAA and QFAB variants of the nRF51
(16KB of RAM) we reduce the workqueue stack size to 512 since the RPA
update mechanism doesn't use more than 340 bytes and we stick to 16
connections maximum.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Since more and more code is going to be reused by both the Host and the
Controller, this commit introduces a common/ folder that will contain
everything that is not tied to one of the two components but shared by
them.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to achieve proper sharing of configuration options, everything
that is common to both the Host and the Controller should now be placed
in the top-level Kconfig file, and Controller-only options are in the
controller/ Kconfig one.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since most of nRF5x-based boards can be used either as a standalone
development kit or as a BLE controller to connect to an external host,
add DT overlays so that the baud rate is correctly set to 1Mbit/s
whenever building the hci_uart sample application.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I08c682bfc0b80dfa88de859e90a011bcd2db2762
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Docs need a label at the top so we can use :ref:`labelname`
to create a link to that doc from other docs.
Change-Id: Ide66f75ca8fac0d5f65fbfc50dc9d130cf45b392
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Reduce the pressure on the common RX buffer pool by reusing HCI
command buffers also for the Command Status or Command Complete
response to them. This also implies removing the existing Kconfig
variable for the command buffer sizes since the size is also dependent
on maximum Command Complete event sizes. Instead, reuse the RX buffer
size also for HCI Command buffers.
Change-Id: I006b287d64a0c9ca40de741aa9a424a49a927385
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
A subsequent patch will start reusing HCI command buffers for
receiving the response, so the distinction of received vs sent data
headroom would just make the code unnecessarily complex. Instead, just
merge these two variable into a single one.
Change-Id: I31d846331939f1a2270df7ed0c75112825e16493
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The idle stack already defaults to 256. The ISR stack size of 640 was
intended to make the app fit on 16k nRF51 variants and is now the
default, i.e. it doesn't need to be explicitly set anymore.
Change-Id: I8db3c080e1f84c65b27f931fa48c75bd90a2d3cd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With LE Secure Connections the longest packet we require is 65 bytes
long: 64 bytes of Public Key data + 1 byte SMP opcode.
Extend the size of the L2CAP pool blocks so that they can fit such
packets and therefore one can use 70-byte
CONFIG_BLUETOOTH_CONTROLLER_TX_BUFFER_SIZE to achieve LE Secure
Connections pairing without HCI fragmentation.
Change-id: I2f11b4277ec5a24ceba79bccc7d84c64065b6e84
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
The following readings were obtained after running the peripheral and
central_hr apps in qemu combined with the controller (hci_uart) on nRF51
and nRF52:
Main Stack 380
Idle Stack: 68
ISR stack: 532
Controller RX Stack: 388
HCI TX Stack: 516
The numbers set in this change provide a safety margin from the ones
measured empirically.
Change-id: Ice7ad7f081502e0ea1accf856a7937c0bf0783b2
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
HCI ECC commands are causing freezes in the controller build. Until
further investigation is done disable them to avoid issues when running
the controller standalone.
Change-id: Ifab0fa362348b72e88adaa5250c914770e4a70ba
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
For consistency with RX_STACK_SIZE and the rest of stack sizes, rename
to use the normal naming scheme.
Change-id: Ib8d484482466fa8d629e6329e07b927abdd6f598
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This helps simplify code that was previously combining net_buf_add()
with memcpy().
Change-Id: If44cf9cd651aba5e544e36567869f147468663eb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move logging out of misc/ to its own subsystem. Anything related to
logging and any new logging features or backends could be added here
instead of the generic location in misc/ which is overcrowded with
options that are not related to eachother.
Jira: ZEP-1467
Change-Id: If6a3ea625c3a3562a7a61a0ba5fd7e6ca75518ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There are static initializer macros available for most kernel objects
which we should use whenever possible.
Change-Id: I496f4d05d26801eddd21fae53bdd4fcdc3246fe3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In order to keep the initialization process light-weight, remove
net_buf_pool_init() and instead perform the initialization of the pool
and buffers in a "lazy" manner. This means storing more information
in the pool, and removing any 'const' members from net_buf. Since
there are no more const members in net_buf the buffer array can be
declared with __noinit, which further reduces initialization overhead.
Change-Id: Ia126af101c2727c130651b697dcba99d159a1c76
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Until now it has been necessary to separately define a k_fifo and
an array of buffers when creating net_buf pools. This has been a bit
of an inconvenience as well as blurred the line of what exactly
constitutes the "pool".
This patch removes the NET_BUF_POOL() macro and replaces it with a
NET_BUF_POOL_DEFINE() macro that internally expands into the buffer
array and new net_buf_pool struct with a given name:
NET_BUF_POOL_DEFINE(pool_name, ...);
Having a dedicated context struct for the pool has the added benefit
that we can start moving there net_buf members that have the same
value for all buffers from the same pool. The first such member that
gets moved is the destroy callback, thus shrinking net_buf by four
bytes. Another potential candidate is the user_data_size, however
right not that's left out since it would just leave 2 bytes of padding
in net_buf (i.e. not influence its size). Another common value is
buf->size, however that one is also used by net_buf_simple and can
therefore not be moved.
This patch also splits getting buffers from a FIFO and allocating a
new buffer from a pool into two separate APIs: net_buf_get and
net_buf_alloc, thus simplifying the APIs and their usage. There is no
separate 'reserve_head' parameter anymore when allocating, rather the
user is expected to call net_buf_reserve() afterwards if something
else than 0 headroom is desired.
Change-Id: Id91b1e5c2be2deb1274dde47f5edebfe29af383a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This allows to fine tune TX stacks size depending on selected HCI
driver. If needed it can be used to tune for monitor too or other
logging mechanism used.
Change-Id: Ib501921da0b786e151083760d85ec58fe3c08b60
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Use BT_STACK_NOINIT for tx stack declaration. This makes sure stack
it properly alligned and account for k_thread overhead.
Change-Id: I704958fcc3ce02aba913f6eaee13ae50d2a81591
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
bt_enable_raw() needs to be called before spawning the tx thread,
otherwise there might be an HCI command processed from the UART
before the HCI driver has been opened and therefore initialized.
Change-Id: I050158bd48bebaf8fa2cf6b11efb54b531f70079
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
From stack_analyze function, used isr stack is 368 bytes
with the controller build, main stack is 288 bytes and idle
stack is 56 bytes. Hence, configuring sizes of 512, 512,
and 256 bytes for isr, main and idle stacks respectively.
Increased max connections from 16 to 20 utilizing the RAM
free from the reduced stack sizes.
Change-id: I67d073fd1893cafc53d36e89035a6fd931488a46
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Implement the 2 HCI commands that provide ECC public key
and shared secret generation:
- LE Read Local P-256 Public Key
- LE Generate DHKey
Jira: ZEP-1246
Change-Id: I79388bfdb9f2e28b9377b4bb6ee2caca25f33f3e
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Switch from fiber_start() to k_thread_spawn(). Also switch to
k_yield() from fiber_yield() in the same go.
Change-Id: I2dc480310f981112063651b61b0ceedf38601bee
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use defines from k_fifo intead of legacy API.
Change-Id: Ib8cf0d88240ef145da550b8cf83d2580e7140521
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Ulf Magnusson