mbedTLS 2.9.0 removed several macros from the config-ccm-psk-tls1_2.h
configuration that we need defined to build mbedTLS in zephyr. This
fixes the CI build failure in samples/net/mbedtls_sslclient
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Mbed TLS 2.9.0 introduces some minor functional improvements including
code size reductions with smaller AES tables, and initial support for
Curve448 along with some security fixes and bug fixes.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
During the spi rework we removed the qmsi spi drivers so we no longer
have Kconfig symbols or drivers related to CONFIG_SPI_QMSI{_SS}. There
are a few references still around that we should remove
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introduce a Kconfig option (CONFIG_OPENAMP_SRC_PATH) that allows us to
point to an external copy of open-amp.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introduce a Kconfig option (CONFIG_LIBMETAL_SRC_PATH) that allows us to
point to an external copy of libmetal.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The STM32L4x2 SoCs need to control the isolation of the USB features
from VDDUSB. This is done through the PWR_CR2 bit USV. The STM32L4 HAL
in stm32l4xx_ll_pwr.h wrongly checks for the PWR_CR2_PVME1 bit, which
is only available on Cat. 3 devices. Replace the check by PWR_CR2_USV
like it is already done in stm32l4xx_hal_pwr_ex.c.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
With recent changes to open-amp we can now include and build it directly
as a zephyr library rather than doing a recursive make. We remove
ext/lib/ipc/open-amp.cmake as part of this change and introduce a
Kconfig option for open-amp.
Fixes: #7673
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Pull in a slightly more recent version of open-amp with changes
to the build system to improve integration with Zephyr. The recent
changes let us embedded open-amp without having to use recursive
building.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move open-amp to be in ext/lib/ipc/open-amp/open-amp. This allows us to
be Zephyr specific files and config like README (for import),
CMakeLists.txt file, Kconfig, etc in ext/lib/ipc/open-amp/ that don't
conflict with any files that might have the same name in
ext/lib/ipc/open-amp/open-amp.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
With recent changes to libmetal we can now include and build it directly
as a zephyr library rather than doing a recursive make. We remove
ext/hal/libmetal.cmake as part of this change and introduce a Kconfig
option for libmetal.
This is a partial fix for issue #7673.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Pull in a slightly more recent version of libmetal with changes
to the build system to improve integration with Zephyr. This change
will break anything that builds with Zephyr and libmetal (which at this
point is only the open-amp example). Will fix that shortly.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
libmetal itself isn't an ipc library, its a generic HAL abstraction
library so move it into ext/hal where it belongs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When the RTC support get added we had a select on HAS_RTC, however this
Kconfig symbol didn't exist. Clean this up to match the pattern of
HAS_MCUX_RTC. The driver now depends on that and the SoC selects it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Origin:
https://github.com/OpenAMP/open-amp
Status:
de361adee09cd31793c60218a0ec49bc307a7410 [v2018.04]
When we import open-amp we removed the apps dir to reduce the amount
of code imported.
Purpose:
IPC layer that implements rpmsg communication between cores.
Description:
This repository is the home for the Open Asymmetric Multi Processing
(OpenAMP) framework project. The OpenAMP framework provides software
components that enable development of software applications for
Asymmetric Multiprocessing (AMP) systems. The framework provides the
following key capabilities.
* Provides Life Cycle Management, and Inter Processor Communication
capabilities for management of remote compute resources and their
associated software contexts.
* Provides a stand alone library usable with RTOS and Baremetal software
environments
* Compatibility with upstream Linux remoteproc and rpmsg components
* Following AMP configurations supported:
a. Linux master/Generic(Baremetal) remote
b. Generic(Baremetal) master/Linux remote
* Proxy infrastructure and supplied demos showcase ability of proxy on
master to handle printf, scanf, open, close, read, write calls from
Bare metal based remote contexts.
Dependencies:
libmetal (https://github.com/OpenAMP/libmetal) - provides HAL layer
between OpenAMP and RTOS or OS environment.
URL:
https://github.com/OpenAMP/open-amp/
commit:
de361adee09cd31793c60218a0ec49bc307a7410
Maintained-by:
External
License:
BSD-3-Clause
BSD-2-Clause
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Origin:
https://github.com/OpenAMP/libmetal
Status:
606c31438025b9fb1515dace1c642d5835d8d33c [v2018.04]
When we import libmetal we removed the tests/ and examples/ dir to
reduce the amount of code imported.
Purpose:
HAL abstraction layer used by open-amp
Description:
Libmetal provides common user APIs to access devices, handle device
interrupts and request memory across the following operating
environments:
* Linux user space (based on UIO and VFIO support in the kernel)
* RTOS (with and without virtual memory)
* Bare-metal environments
Dependencies:
Depends on Zephyr itself as it utilizes Zephyr's APIs to provide an
abstraction to open-amp.
URL:
https://github.com/OpenAMP/libmetal
commit:
606c31438025b9fb1515dace1c642d5835d8d33c
Maintained-by:
External
License:
BSD-3-Clause
License Link:
https://github.com/OpenAMP/libmetal/blob/master/LICENSE.md
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add soc configuration support and dts files for nxp_lpc54xxx_m0.
Adjusted nxp_lpc54xxx soc, configuration and dts files for the
presence of slave core.
Origin: Original
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds the configuration, driver, and HAL changes required
to implement a MCUX based RTC driver for the NXP Kinetis KW41Z.
Signed-off-by: Andy Gross <agross@kernel.org>
Previous way was cumbersome (based on an old way for cc2520 actually),
so moving towards the more recent and proper way.
This will enable anybody to actually provide gpio configuration for a
winc1500 out of any board specific location.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adding support for WINC1500 WiFi chip.
It introduces the wifi drivers sub-directory.
It provides a Full-MAC for 802.11 and an offloaded network stack as
well. The driver uses Atmel's winc1500 HAL.
Signed-off-by: Dario Pennisi <dario@iptronix.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Massimiliano Agneni <massimiliano.agneni@iptronix.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The instructions performed by standard Zephyr startup files are removed
from the file startup_LPC54114_cm4.S. Introduced the section
_PlatformInit which will be called when platform specific initialization
is needed.
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
The new file startup_LPC54114_cm4.S is a copy of the file
devices/LPC54114/gcc/startup_LPC54114_cm4.S from mcux 2.3.0.
It contains platform specific initialization code for both cores.
Origin: NXP MCUXpresso SDK 2.3.0
URL: mcux.nxp.com
Maintained-by: External
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Add comments explaining why these three driverlib files need to be
built rather than using the ROM versions.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Previously, a rom.h header was missing from the SDK board porting
file, resulting in some MAP_ API calls not getting vectored to ROM.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Add support for enabling multiple disk interfaces (Flash, RAM)
simultaneously in Zephyr by introducing a simple disk interface
framework where we can register multiple disks which would
interface with different storage devices. This would enable us
to have multiple instances of FATFS in Zephyr.
Add support for mass storage drive disk name which will be
used as an argument when calling the disk interface API's.
Enable multiple volumes support configuration in
ELM FAT library.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add wrapper function for alt_printf() Altera HAL runtime API
to enable Altera HAL drivers on Zephyr.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add Altera Nios-II modular Scatter-Gather DMA (mSGDMA) HAL
driver to Zephyr.
The sources are taken from the Altera SDK v17.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Adds a shim layer around the imx gpio driver to adapt it to the Zephyr
gpio interface.
For now only the port 4 was tested.
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
We have never used the mcux clock_config.c/h files, so remove them. We
configure clocks in soc.c instead to allow more options with Kconfigs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
We have been combining imported mcux drivers into a flattened directory
structure to maximize driver reuse, but the introduction of additional
nxp soc families (lpc and imx) to zephyr has introduced driver naming
conflicts. This caused us to rename and modify imported files, such as
fsl_gpio.c/h, to make them unique across all three nxp soc families.
This makes updating the the mcux drivers complicated, especially for the
lpc family.
Reoganize the mcux drivers into soc family subfolders, so we can just
copy all the drivers from an mcux distribution (which is done on an
soc-basis) into the appropriate soc family folder. Undo all of the
naming changes that occurred when lpc and imx drivers were originally
imported. Undo the accidental squashing of the kinetis watchdog and dcdc
drivers that occurred when the imx drivers were introduced.
The drawback to this approach is that we have duplicate files when the
same hw ip modules exist in multiple soc families, however there are
only few cases where this occurs, such as fsl_lpuart and fsl_trng.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
A template for documenting non-apache licensed components was introduced
after mcux was originally imported. Update the README to follow the
template in doc/contribute/code_component_README.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This updates mbedTLS to 2.8.0, which fixes CVEs 2018-0488 and
2048-0487, that affects 2.7.0.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This adds a translation layer to make the nrfx driver for the nRF SPIM
(SPI Master with EasyDMA) peripheral accessible via the Zephyr's API.
The shim is provided only for nRF52840 because of a hardware anomaly
present in nRF52832. See Anomaly 58 (SPIM: An additional byte is clocked
out when RXD.MAXCNT = 1) in Errata for this chip.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The simple function that helps to integrate nrfx IRQ handlers with
the IRQ_CONNECT macro can be used in shims for various nrfx drivers,
not only the SPI one.
Similarly, the macro for getting the IRQ number from the peripheral
base address needs to be widely available. It should be even moved
to <nrfx_common.h> in some next nrfx update.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
- Debug code did not compile when level set to DEBUG.
- OpenThread has a define for BASE which conflicts with the BASE
field in MTB_Type defined in MKW41Z4.h. The change is consistent
with how it was handled in the KW41 port in OpenThread.
Signed-off-by: David Leach <david.leach@nxp.com>
Adds a shim layer around the imx uart driver to adapt it to the Zephyr
serial interface.
Modem mode was introduce to control it as DCE and DTE and can be
configured in the device tree:
modem-mode:
type: int
category: required
description: Set the UART Port to modem mode 0 (dce) 1 (dte)
generation: define
For now only the UART 2 was tested.
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
This code component is used to add Zephyr support on iMX7 processors,
exclusively on Cortex M4 core, and to speed up the development process
it was decided to have it based on NXP FreeRTOS BSP implementation.
The source code was imported from the following folders:
FreeRTOS_BSP_1.0.1_iMX7D/platform/drivers
FreeRTOS_BSP_1.0.1_iMX7D/platform/devices
This source code depends on headers and sources from zephyr:
ext/hal/cmsis
Origin: iMX7D NXP FreeRTOS BSP Peripheral Driver
License: BSD 3-Clause
URL: https://www.nxp.com/webapp/Download?colCode=FreeRTOS_iMX7D_1.0.1_LINUX&appType=license
commit: no commit hash
Purpose: The peripheral driver wraps the H/W for i.MX7 M4 core
Maintained-by: External
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
half-FP feature requires <math.h> form newlib_libc. It was include
wrongly by default. This path fix conduction for related include
directive.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This path make logic for enabling float and half-float
support positive driven and fix NEWLIB_LIBC selections for
these features.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This adds a translation layer to make the nrfx driver for the legacy
(i.e. without EasyDMA) nRF SPI peripheral accessible via the updated
Zephyr's API of the SPI driver.
Configuration files are already prepared for adding support for SPIM
(Master with EasyDMA) and SPIS (Slave with EasyDMA) peripherals.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Selecting a choice symbol is always a no-op, and the latest version of
Kconfiglib prints a warning. This commit removes all selects of choice
symbols, which might make the Kconfig files a bit clearer and gets rid
of the warnings.
This is just a dumb removal. I did not try to guess the intent of each
select.
Fixes#6849
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
These files contain addresses of memory-mapped registers and their
bitfields definitions. They may become very useful in debugging.
Origin: nrfx
License: BSD 3-Clause
URL: https://github.com/NordicSemiconductor/nrfx/tree/v1.0.0
commit: cf78ebfea1719d85cf4018fe6c08cc73fe5ec719
Purpose: Facilitate debugging on nRF5 SoCs
Maintained-by: External
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Updates nrfx to the recently released version and adjusts its glue
layer accordingly.
License headers are slightly corrected to match the license text at
https://opensource.org/licenses/BSD-3-Clause.
Deprecated MDK files nrf51xxx_peripherals.h are removed, since they
are replaced by a common file named nrf51_peripherals.h.
Origin: nrfx
License: BSD 3-Clause
URL: https://github.com/NordicSemiconductor/nrfx/tree/v1.0.0
commit: cf78ebfea1719d85cf4018fe6c08cc73fe5ec719
Purpose: Provide peripheral drivers for Nordic SoCs
Maintained-by: External
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use HAS_ Kconfig option as intended, those are invisible option that
signify support of a certain feature that can be selected by a hardware
or platform.
For RTT and system view this was not dont in an inconsistent way.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Instead of CONFIG_COAP_MBEDTLS_SSL_MAX_CONTENT_LEN, use recently
introduced CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Maureen Helm