Enable us bit to check user mode more efficienly.
US is read as zero in user mode. This will allow use mode sleep
instructions, and it enables a form of denial-of-service attack
by putting the processor in sleep mode, but since interrupt
level/mask can't be set from user space that's not worse than
executing a loop without yielding.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* add nested interrupt support for interrupts
+ use a varibale exc_nest_count to trace nest interrupt and exception
+ regular interrupts can be nested by regular interrupts and fast
interrupts
+ fast interrupt's priority is the highest, cannot be nested
* remove the firq stack and exception stack
+ remove the coressponding kconfig option
+ all interrupts (normal and fast) and exceptions will be handled
in the same stack (_interrupt stack)
+ the pros are, smaller memory footprint (no firq stack), simpler
stack management, simpler codes, etc.. The cons are, possible
10-15 instructions overhead for the case where fast irq nests
regular irq
* add the case of ARC in test/kernel/gen_isr_table
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This avoids asm files from having to explicitly define the _ASMLANGUAGE
symbol themselves.
Change-Id: I71f5a169f75d7443a58a0365a41c55b20dae3029
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When going into DEEP_SLEEP mode, the ARC core now saves
its context. This includes:
- All core registers
- Stack pointer
- Program counter (restored by jumping to the restore code)
The arc reset code now checks if the GPS0 bit 2 is set.
This is similar to the behavior of the x86 core done by
the QMSI bootloader which is setting GPS0 bit 1 in order
to call the restore path instead of cold boot path.
The sample has been adapted in order to support the ARC.
Jira: ZEP-1222
Change-Id: I375f03b16b8a5fd1f07ead55cf7e4947d6290c9f
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Too much code might run with a stale icache, before _PrepC(), so move
the invalidation/disabling code earlier. The asm code does the exact
same thing disable_icache() and invalidate_dcache() were doing.
Change-Id: If52f4e4a1de546fb82873c91ead95614a44b106d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
There is no FIRQ stack in the system in this case, so do not initialize
it.
Change-Id: I8bc068ce43ac8a39909994d8cc01ba0c6a17f4ae
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Use the main stack during very early boot so that we can call memset on
the interrupt and FIRQ stacks. Iniitalize the them before one of them is
used for the rest of the pre-kernel initialization.
Change-Id: Ib57856a66273dda9382e08fa91da5a54847b77c2
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Same issue as with ARM. ARC can use _Swap() though, because the call to
it is serial, not generating a low-priority exception and interrupts are
locked until the main() thread is context-switched into and the
interrupt stack is released.
Fixes ZEP-1310.
Change-Id: Ie1f27f7ad0502191ca2867b5400d6e0bfb7f0fc6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Some ARC CPUs can be built with separate instruction bus
and data bus (i.e. Harvard Architecture). Such systems
have only ICCM and DCCM memories. When CONFIG_HARVARD
is defined, the initial stack pointer is set to the
TOP of the DCCM memory. Currently there is no SOC that
existing in Zephyr tree that sets CONFIG_HARVARD, but
this will be coming soon.
Change-Id: I2016d1f472fbdad683a964aa0b65c5263ecfb6cf
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
There is a BUG here in that the alias for __start was
aliased to the start of the vector table. Yet, on ARC CPUs,
the vector table CANNOT be the entry point, because there
is no code in a vector table. Only addresses appear in each vector.
Thus, the reset vector, at offset 0 in this table, is a raw address.
The top Makefile in zephyr sets the lable __start to be the entry point
like this: -e __start. Debuggers, for example, use this entry point
to know where the first line of code is.
Also, in KConfig, there were duplicate NSIM blocks. One has been
removed.
Change-Id: I480be7d338a8b45b8ea6ef3f55ac2e6c43829452
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Remove hardcoding and make the values configurable. Also make the
Kconfig variables consistent with other architectures.
Change-Id: I69334002303d4d8abaf7363d9134fd5f46ce4eeb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removed old style file description and documnetation and apply
doxygen synatx.
Change-Id: I3ac9f06d4f574bf3c79c6f6044cec3a7e2f6e4c8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The defauls set in architecture Kconfig are not being overwritten
by the platform, so remove those and rely on platform provided
data.
Change-Id: Ia71d9d14dddce94c29b9ca957b4ed3ae8838d96c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Wayne Ren