Adds a K_DELAYED_WORK_DEFINE, matching the K_WORK_DEFINE macro, with
accompanying Z_DELAYED_WORK_INITIALIZER macro.
Makes k_delayed_work_init a static inline function, like its K_WORK
counterpart.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Although the documentation states that only work items that have not
completed the delay can be cancelled, in fact pending items can also
be removed from a work queue. Document that behavior
Also document the specific return value that will be obtained based on
the state of the work item at the time cancellation was attempted
using the current implementation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The implementation checks the work queue pointer before taking a lock
and entering code that, depending on build options, may fault if that
pointer is null. Move the check under the lock to ensure condition is
preserved. Then the check in work_cancel is no longer necessary since
condition is verified under lock at all call sites.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add k_delayed_work_pending similar to k_work_pending to check if the
delayed work item has been submitted but not yet completed.
This would compliment the API since using k_work_pending or
k_delayed_work_remaining_get is not enough to check this condition.
This is because the timeout could have run out, but the timeout handler
not yet processed and put the work into the workqueue.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add a k_timeout_t type, and use it everywhere that kernel API
functions were accepting a millisecond timeout argument. Instead of
forcing milliseconds everywhere (which are often not integrally
representable as system ticks), do the conversion to ticks at the
point where the timeout is created. This avoids an extra unit
conversion in some application code, and allows us to express the
timeout in units other than milliseconds to achieve greater precision.
The existing K_MSEC() et. al. macros now return initializers for a
k_timeout_t.
The K_NO_WAIT and K_FOREVER constants have now become k_timeout_t
values, which means they cannot be operated on as integers.
Applications which have their own APIs that need to inspect these
vs. user-provided timeouts can now use a K_TIMEOUT_EQ() predicate to
test for equality.
Timer drivers, which receive an integer tick count in ther
z_clock_set_timeout() functions, now use the integer-valued
K_TICKS_FOREVER constant instead of K_FOREVER.
For the initial release, to preserve source compatibility, a
CONFIG_LEGACY_TIMEOUT_API kconfig is provided. When true, the
k_timeout_t will remain a compatible 32 bit value that will work with
any legacy Zephyr application.
Some subsystems present timeout (or timeout-like) values to their own
users as APIs that would re-use the kernel's own constants and
conventions. These will require some minor design work to adapt to
the new scheme (in most cases just using k_timeout_t directly in their
own API), and they have not been changed in this patch, instead
selecting CONFIG_LEGACY_TIMEOUT_API via kconfig. These subsystems
include: CAN Bus, the Microbit display driver, I2S, LoRa modem
drivers, the UART Async API, Video hardware drivers, the console
subsystem, and the network buffer abstraction.
k_sleep() now takes a k_timeout_t argument, with a k_msleep() variant
provided that works identically to the original API.
Most of the changes here are just type/configuration management and
documentation, but there are logic changes in mempool, where a loop
that used a timeout numerically has been reworked using a new
z_timeout_end_calc() predicate. Also in queue.c, a (when POLL was
enabled) a similar loop was needlessly used to try to retry the
k_poll() call after a spurious failure. But k_poll() does not fail
spuriously, so the loop was removed.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
A recent patch allowed an error code to be returned even though the
execution path treated it as a non-error condition. Clear the code
before returning.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This is aligned with the documentation which states that an error shall
be returned if the work has been completed:
'-EINVAL Work item is being processed or has completed its work.'
Though in order to be able to resubmit from the handler itself it needs
to be able to distinct when the work is already completed so instead of
-EINVAL it return -EALREADY when the work is considered to be completed.
Fixes#22803
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Re-run with updated script to convert integer literal delay arguments
to k_thread_create and K_THREAD_DEFINE to use the standard timeout
macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The callback function has been ignored in z_timeout_init() since the
timer rework in fall 2018. Passing real handlers to it in code is
distracting when they will be overridden by whatever callback is
provided in z_add_timeout().
As this function is an internal API deprecation is not necessary.
Remove the parameter and change all call sites to drop the argument.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
When compiling the kernel with CONFIG_SYS_CLOCK_TICKS_PER_SEC=0,
the CONFIG_SYS_CLOCK_EXISTS internal variable is unset.
This completely disables timer handling in the kernel, but a couple of
spots missed the required conditional compilation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Controlling expression of if and iteration statements must have a
boolean type.
MISRA-C rule 14.4
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
There was a detected user error in the code where racing insertions of
k_delayed_work items into different queues would be detected and
flagged as an error (honestly I don't see much value there -- Zephyr
doesn't as a general rule protect against errors like this, and
work_q's are inherently kernel things that don't require
userspace-style checking).
This got broken with spinlockification, where each work_q object got
its own lock, so the single lock wouldn't protect against the other
insert function any more. As it happens, that was needless. The core
synchronization on a work_q is in the internal k_queue object anyway
-- the lock in this file was only ever used for (very fast,
noncontending) delayed work insertion. So go back to a global lock to
preserve the original behavior.
Fixes#14104
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Work queues are implemented in terms of k_queue objects which provide
their own synchronization. In particular insertion is potentially
blocking and always acts as a reschedule point, which means that it
must not be called with spinlocks held.
Release the lock first, and do a little cleanup of the resulting
k_delayed_work_submit_to_queue() logic.
Fixes#13411
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Each work_q object gets a separate spinlock to synchronize access
instead of the global lock. Note that there was a recursive lock
condition in k_delayed_work_cancel(), so that's been split out into an
internal unlocked version and the API entry point that wraps it with a
lock.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This allows for workqueues to be started in user mode.
No additional kernel objects or system calls are defined
other than starting the workqueue in user mode; for
permission purposes the embedded queue and thread objects
are sufficient.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
k_work and k_work_q are not kernel objects, nor will they
be. k_work_q contains some kernel objects which are tracked
independently.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add the callback parameter to add_timeout(), and remove the thread
argument. Now the "low level" timeout API can be expressed without
reference to threads.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Now that this is known to be an unused value, remove it from the API.
Note that this caught a few spots where we were passing values (a
non-NULL wait_q with a NULL thread handle) that were always being
ignored before.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Added k_thread_name_set() and enable thread name setting when declaring
static threads. This is enabled only when THREAD_MONITOR is used. System
threads get a name by default.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
MISRA C requires that every controlling expression of and if or while
statement have a boolean type.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Make if statement using pointers explicitly check whether the value is
NULL or not.
The C standard does not say that the null pointer is the same as the
pointer to memory address 0 and because of this is a good practice
always compare with the macro NULL.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
k_thread_create is used only in k_word_q_start that has no error
handling, so the return of that function is not used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Ignoring the return of _abort_timeout when there is nothing to
do. Either because the condition to return something different from 0
was prior checked or because it was called during come cleanup.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
irq_lock returns an unsigned int, though, several places was using
signed int. This commit fix this behaviour.
In order to avoid this error happens again, a coccinelle script was
added and can be used to check violations.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
As discovered in https://github.com/zephyrproject-rtos/zephyr/issues/5952
...a duplicate call to k_delayed_work_submit_to_queue() on a work item
whose timeout had expired but which had not yet executed (i.e. it was
pending in the queue for the active work queue thread) would fail,
because the cancellation step wouldn't clear the PENDING bit, causing
the resubmission to see the object in an invalid state. Trivially
fixed by adding a bit clear.
It also turns out that the behavior of the code doesn't match the
docs, which state that a PENDING work item is not supposed to be
cancelled at all. Fix the docs to remove that.
And on yet further review, it turns out that there's no way to make a
test like the one in the linked bug threadsafe. The work queue does
no synchronization by design, so if the user code does no external
synchronization it might very well clobber the running handler. Added
a sentence to the docs to reflect this gotcha.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Currently this is defined as a k_thread_stack_t pointer.
However this isn't correct, stacks are defined as arrays. Extern
references to k_thread_stack_t doesn't work properly as the compiler
treats it as a pointer to the stack array and not the array itself.
Declaring as an unsized array of k_thread_stack_t doesn't work
well either. The least amount of confusion is to leave out the
pointer/array status completely, use pointers for function prototypes,
and define K_THREAD_STACK_EXTERN() to properly create an extern
reference.
The definitions for all functions and struct that use
k_thread_stack_t need to be updated, but code that uses them should
be unchanged.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
All system calls made from userspace which involve pointers to kernel
objects (including device drivers) will need to have those pointers
validated; userspace should never be able to crash the kernel by passing
it garbage.
The actual validation with _k_object_validate() will be in the system
call receiver code, which doesn't exist yet.
- CONFIG_USERSPACE introduced. We are somewhat far away from having an
end-to-end implementation, but at least need a Kconfig symbol to
guard the incoming code with. Formal documentation doesn't exist yet
either, but will appear later down the road once the implementation is
mostly finalized.
- In the memory region for RAM, the data section has been moved last,
past bss and noinit. This ensures that inserting generated tables
with addresses of kernel objects does not change the addresses of
those objects (which would make the table invalid)
- The DWARF debug information in the generated ELF binary is parsed to
fetch the locations of all kernel objects and pass this to gperf to
create a perfect hash table of their memory addresses.
- The generated gperf code doesn't know that we are exclusively working
with memory addresses and uses memory inefficently. A post-processing
script process_gperf.py adjusts the generated code before it is
compiled to work with pointer values directly and not strings
containing them.
- _k_object_init() calls inserted into the init functions for the set of
kernel object types we are going to support so far
Issue: ZEP-2187
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This has been a limitation caused by k_fifo which could only remove
items from the beggining, but with the change to use k_queue in
k_work_q it is now possible to remove items from any position with
use of k_queue_remove.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Historically, stacks were just character buffers and could be treated
as such if the user wanted to look inside the stack data, and also
declared as an array of the desired stack size.
This is no longer the case. Certain architectures will create a memory
region much larger to account for MPU/MMU guard pages. Unfortunately,
the kernel interfaces treat both the declared stack, and the valid
stack buffer within it as the same char * data type, even though these
absolutely cannot be used interchangeably.
We introduce an opaque k_thread_stack_t which gets instantiated by
K_THREAD_STACK_DECLARE(), this is no longer treated by the compiler
as a character pointer, even though it really is.
To access the real stack buffer within, the result of
K_THREAD_STACK_BUFFER() can be used, which will return a char * type.
This should catch a bunch of programming mistakes at build time:
- Declaring a character array outside of K_THREAD_STACK_DECLARE() and
passing it to K_THREAD_CREATE
- Directly examining the stack created by K_THREAD_STACK_DECLARE()
which is not actually the memory desired and may trigger a CPU
exception
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Unline k_thread_spawn(), the struct k_thread can live anywhere and not
in the thread's stack region. This will be useful for memory protection
scenarios where private kernel structures for a thread are not
accessible by that thread, or we want to allow the thread to use all the
stack space we gave it.
This requires a change to the internal _new_thread() API as we need to
provide a separate pointer for the k_thread.
By default, we still create internal threads with the k_thread in stack
memory. Forthcoming patches will change this, but we first need to make
it easier to define k_thread memory of variable size depending on
whether we need to store coprocessor state or not.
Change-Id: I533bbcf317833ba67a771b356b6bbc6596bf60f5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types. This handles the remaining includes and kernel, plus
touching up various points that we skipped because of include
dependancies. We also convert the PRI printf formatters in the arch
code over to normal formatters.
Jira: ZEP-2051
Change-Id: Iecbb12601a3ee4ea936fd7ddea37788a645b08b0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Also remove mentions of unified kernel in various places in the kernel,
samples and documentation.
Change-Id: Ice43bc73badbe7e14bae40fd6f2a302f6528a77d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Trond Einar Snekvik