Add enum for LE Read Transmit Power phy values, which are different
form the values used for PHY update procedure since it includes values
for the LE Coded PHY coding schemes.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added a new Bluetooth API that can be used to read the current and
maximum transmit power level of the radio. The reading operation is
performed over HCI.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Add helper defines for Extended Advertising parameters that
can be used while creating Extended Advertising sets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Make bt_conn_ref return NULL if the reference count has reached zero.
This makes it possible to re-use bt_conn_ref internally to re-use the
reference count mechanism to check if the reference is in use.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add defines and structs for reading information about supported codes,
codec capabilities and controller delays. Return parameter structs for
commands that return multiple variable-length fields only model the
fixed-length fields to minimize inconsistencies.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Clarify that the acl_data struct includes the bt_buf type as the
first variable in the user data struct.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add implementation of HCI_LE_Set_Connection_CTE_Transmit_Parameters
for Bluetooth 5.1 Direction Finding.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add Bluetooth 5.1 Direction Finding HCI command:
HCI_LE_Read_Antenna_Information handling to Host.
Add wrapper function to handle send the command
and receive response from Controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Put infrastructure for the following HCI commands/events in place:
* LE Setup ISO Data Path command
* LE Remove ISO Data Path command
* Configure Data Path command
* LE Set CIG Parameters Test command
* LE ISO Read Test Counters command
* LE ISO Receive Test command
* LE ISO Test End command
* LE ISO Transmit Test command
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
Document the security changed callback can be called with no change
in the security level when the encryption key has been changed
in the link-layer.
Also update the documentation for set security function to include
the bond information so that it matches the documentation for security
changed callback.
Update pairing process to pairing procedure for consistency.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Adds support for using the periodic advertiser list.
This list allows the application to rely on specific
devices when creating periodic advertising syncs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds support for the periodic advertising sync transfer
(PAST) feature, which allows a synced device, or an
advertiser, to transfer synchronization of a periodic
advertising train to a connected device.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change the advertising option that controls if the directed advertiser
will use an RPA or the identity address of the peer for the initiator
address.
This option currently has two issues:
- It behaves differently if the privacy feature has been enabled,
which can be confusing for application to use.
- It cannot start a directed advertiser towards a peer that is not
privacy-enabled and has distributed an IRK.
This commit includes the following changes:
- When privacy has been enabled in order to advertise towards a
privacy-enabled peer the BT_LE_ADV_OPT_DIR_ADDR_RPA option must now
be set (same as when privacy has been disabled).
- It is now possible to start a directed advertiser using the identity
address of the peer when privacy-enabled.
- When privacy has been enabled the advertising option combination
of using the local identity address and an RPA as the initiator
address is now disallowed and will return an error code.
This is done because this combination did not actually work and would
have used the identity address of the peer instead.
- If the controller does not support controller-based privacy then
using the option BT_LE_ADV_OPT_DIR_ADDR_RPA will return ENOTSUP
because this behavior cannot be done with host-based privacy.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Adds a `destroy` callback to the `struct bt_gatt_indicate_params` which
is used to signify to the application that the indication operation has
completed and the struct instance can be freed/destroyed.
This is required as the number of indication value callbacks that will
be triggered is not known by the caller when the `conn` parameter is
`NULL`.
Tracking when this callback should be run is mananged by a private
reference counter inside the struct.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Update the signature of the `bt_gatt_indicate_func_t` callback type by
replacing the attr pointer with a pointer to the
`bt_gatt_indicate_params` struct that was used to start the indication.
This allows the callback to free the `bt_gatt_indicate_params` instance
if it was allocated from storage, while still allowing the
`bt_gatt_attr` value to be accessed through `params->attr`.
Allocating the `bt_gatt_indicate_params` instance from storage is
desirable as multiple indications can be queued, however each instance
must be valid until the callback is run.
Implements API update from #29357
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Moves mesh feature configuration to a separate module, deprecating the
bt_mesh_cfg_srv structure. The initial values for the features should
now be enabled through KConfig, where new config entries have been added
for each feature.
This removes the upward dependency on the config server from the core
stack, and makes the config server a pure frontend for the configuration
states, as all spec mandated behavior around the feature states is now
encapsulated.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds public documentation for the Heartbeat feature in a separate page
under Bluetooth Mesh.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Encapsulates the Heartbeat state and functionality in a separate
heartbeat module, removing all manipulation of the heartbeat state from
the transport and config server modules.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The sync established event caused by a cancel by the host
was not properly handled. When cancelling the sync established
event is created, and the sync object should not be deleted
before that event is received.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Document and validate advertising parameters for the disallowed
advertising mode high duty cycle directed connectable advertising
using extended advertising PDUs.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Currently all provisioning procedure into common source
files call `prov.c`, that will not compile separately.
Add `BT_MESH_NODE` to control whether nodes are supported
and device provisioning is supported, this will be used in
provisioner role.
Add more provisioner OOB authentication method.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Document the behavior of the bt_conn_le_conn_update API when the
local device is the peripheral role.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add Queue Size and Receive Window information to lpn
callback function to notify upper layer to determine
currently friend node information, which may be used
in future.
Add Callback structure to notification application which friendship
has been changed.
Add function `bt_mesh_friend_terminate` let's app layer determine
terminate friendship manually.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Improve the documentation of the UUID header by adding documentation
for all helper macros.
Be explicit in which macros that expects host endianness, and which
ones that expects little endian format.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This is a major refactoring of the handling of the cryptographic
material of both the network and transport layers. The aim is to
encapsulate the key object manipulation, and improve overall modularity.
Pulls Applications and Subnets out of the bt_mesh and into separate
modules, with static storage types on the data. This has several
side-effects:
- The Config Server no longer operates directly on the bt_mesh.subs and
bt_mesh.apps lists, but goes through a public configuration interface,
following the pattern set in #27908.
- All iteration through the keys is done through iteration APIs
- Key resolution on RX and TX is centralized.
- Changes to the keys triggers events the other modules can register
handlers for.
- Friendship credentials are stored in the lpn and friend structures.
Part of #27842.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds support for enabling/disabling PA sync receive,
which allows applications to control when to receive data
while a sync is established.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Document the distinction between the existing non-connectable
advertising configurations, and add one that uses identity which will
be the same for all beacons.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Document which fields in the attribute parameter in the discovery
callback contains valid information.
Document the type of the user_data so that the application can cast
this to a valid type in order to retrieve the information.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update check in the bt_gatt_attr_value_handle API function to use the
UUID of the function, in case the attribute has been declared with a
different read handler, or the attribute is a temporary object
where the read attribute has not been set.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move struct documentation of member variables to inline documentation,
which is consistent with the rest of the struct definitions.
Removes documentation of a struct variable that does not exist for
bt_gatt_ccc_cfg.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove struct member alignment that has become broken by the search
and replace of the uintX_t vs uX_t types.
Remove the alignment since maintaining this causes annoying whitespace
changes when a new variable is added with a longer type name.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Changes the callbacks for periodic sync callbacks such that multiple
applications can register callbacks, similar to the connection and
scan callbacks.
This change will make it easier to support the PAST feature, as
PA syncs make be created by the controller which then notifies
the host, and thus the application (if callback registered).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
BT_HCI_ERR and BT_SECURITY_ERR both define success constants which can
be used to check the results and make the intended value domain clear.
Add the same for ATT error values.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Channel that requires segmentation must set alloc_buf in order for the
stack to be able to reassemble segments of an SDU.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BT_UUID_ES_TRIGGER_SETTING was incorrectly using
BT_UUID_ES_MEASUREMENT_VAL as value instead of
BT_UUID_ES_TRIGGER_SETTING_VAL.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The bluetooth.h header file uses a different tabulation style in the
documentation headers, which for recent Doxygen versions generates
verbatim blocks. This disables usage of the @option ALIAS because
verbatim blocks cannot be nested. With this commit the documentation's
tabulation is fixed and `@option` is used to resolve Kconfig options.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
This updates Kconfig options in the Doxygen documentation to use the new
@option ALIAS. There are three categories of fixes:
* Use of `:option:` inside Doxygen headers, which is not valid (this is
rST syntax!).
* Kconfig options that were just written as plain text and were no
references were generated.
* Use of `@rst` blocks where the only reason for using them was to have
Kconfig options resolved.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
This introduces bt_gatt_attr_get_handle which can be used to resolve
handles of static attributes.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Joakim Andersson