Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Using LOAPIC Timer as default since it is the default for most target
X86 systems.
Change-Id: I71c9b307839ebcf46fb28e1b709089de600af83f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
() Renames ns16550.c to uart_ns16550.c. This is to follow
the driver naming convention.
() Renames functions ns16550_uart_*() to uart_ns16550_*(),
following driver naming convention.
() UART ports initialization is moved into the driver itself.
All the init code in platform config files is removed.
() Adds (many) Kconfig options. These don't have to be defined
in each platform's board.h anymore.
() Renames CONFIG_NS16550_* to CONFIG_UART_NS16550_*
() Disable NS16550 for ARC as no port is defined anyway.
Change-Id: I76bbe25b9bc75eb62df81e533f84f4f63a5257b7
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Do not depend on environment variables and use a kconfig variable
for defining the architecture.
In addition, remove the X86_32 variable, it just duplicates X86 for
not good reason, at least until start supporting MCUs with 64bit.
Change-Id: Ia001db81ed007e6a43f34506fed9be1345b88a4b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not use micro_* or nano_* defconfigs, instead maintain platform
in one single defconfig and merge nano or micro support on top.
Change-Id: I0d5184f37865ed8312e516e48cf5a8584a287dfe
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
do not use microkernel or nanokernel as the output binaries,
instead, use zephyr globally.
Also change the documentation to reflect this.
Change-Id: I8405761d1a0392c90cdfeec5c67d72eb4e5a76ff
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In the future there will be no need to deal with such updates anymore.
Change-Id: Ib66b826f054f444ccb8f7e6f0e6a31e8d93f342f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make config variable name match the function. The PIC is never turned
on in the zephyr code so there is nothing to shut off.
Change-Id: I1627e5a35cc37ef7959f36758c1e1aec03e22782
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Add the sleep events point for x86 and ARM arquitectures that gives
information about when the CPU went to sleep mode, when it woke up
and which interrupt causes the CPU to awake.
Change-Id: Iaa06a678eab661357d084ee1f79c4cfcf19bf85d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Add the interrupt profile points for x86 and ARM arquitectures. This
gives information regarding the time when interrupts occur.
Change-Id: Ic876c0e7f9e8819d53e0578416f09146f4456d3d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
The term 'context' is vague and overloaded. Its usage for 'an execution
context' is now referred as such, in both comments and some APIs' names.
When the execution context can only be a fiber or a task (i.e. not an
ISR), it is referred to as a 'thread', again in comments and everywhere
in the code.
APIs that had their names changed:
- nano_context_id_t is now nano_thread_id_t
- context_self_get() is now sys_thread_self_get()
- context_type_get() is now sys_execution_context_type_get()
- context_custom_data_set/get() are now
sys_thread_custom_data_set/get()
The 'context' prefix namespace does not have to be reserved by the
kernel anymore.
The Context Control Structure (CCS) data structure is now the Thread
Control Structure (TCS):
- struct ccs is now struct tcs
- tCCS is now tTCS
Change-Id: I7526a76c5b01e7c86333078e2d2e77c9feef5364
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
... instead of an array index to a global array. This is
an intermediate step to make the drivers conform to
the new driver model.
This only changes from using a direct array index to using
device structs. The UARTs are still staticlly defined.
Later patches will make the drivers utilize the driver
initialization procedure specified by the driver model.
Change-Id: I18041bbb4b0efdf8ae87088fd000b391d0827e9b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add the context switch profile point for x86 and ARM arquitectures.
Change-Id: Ib7205059104ed47b96ba75b8cfefec3ff35f6813
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Add a standardized mechanism to add profiling points to the Kernel
with a single interface for the user to collect the profiling data.
Change-Id: I4fa34ac1b42f73a73ba1fd805e755ee2fd00dff7
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Add a log event tool with a single interface for the user to
add/collect the event log data.
Change-Id: Ia4b78836748c5d7e44ba1bdd50c28434e8a55d65
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Removes the non-PIC disabling PIC code as the PIC is not a supported interrupt
controller. The PIC disabling code remains as it is needed to prevent the
generation of spurious interrupts from the PIC (see CONFIG_SHUTOFF_PIC).
Change-Id: Ic59aa17ab96f34685a5d7b5f24cab391de47edca
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Creating the IOAPIC and LOAPIC Kconfig options permits future commits to remove
those settings from the relevant board.h files.
Change-Id: Ie33c703f39c68d6e251d67b1c7cf75a0dd56a7e6
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds additional Kconfig options to the HPET timer for setting its base address,
IRQ, IRQ priority and condition for triggering an interrupt.
Change-Id: I80349c60237380129da9ef41ccf6850c6b874c3c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Renames the menu to "Processor Capabilities" as it is both more concise and
it gives a more "consistent feel" to the menu names (referring to the platform
equivalent "Platform Capabilities".)
Change-Id: I1f835e11e382f811720c17e194b4bf410ef74d31
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Reduces redundancy in the x86 Kconfig menus.
Change-Id: I90ff7d6aedda2aa02528b6821eeaf7eb6bea321c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The Kconfig option PROT_MODE_SWITCH_PROMPT was being used to conditionally
display the "Boot Sequence Options" Kconfig menu. It is simpler to include
both PROT_MODE_SWITCH and its dependent BOOT_A20_ENABLE in the parent menu.
However, doing so necessitates that the name of the parent menu be changed
from "Bootloader Options" to "Boot Options".
Change-Id: I9b9a074a0d4ec5209f5349b42178409c73875b00
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The Kconfig option HARDWARE_BP_SUPPORTED is not used.
Change-Id: Ifed886f733e8125ef1c45926e46e31ff48d06316
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The top-level menus "x86 Core Options" and "Bus Options (PCI etc.)" are now
sub-menus to the the top-level menu "General Platform Configurations".
Also, the "Board Capabilities" sub-menu has been hoisted out of the
"x86 Core Options" menu and placed as a renamed sub-menu
(Platform Capabilities) to the top-level "General Platform Configurations"
menu.
This helps to create a more logical flow when using "make menuconfig".
Change-Id: I3a837b039eb735ec4073a1721f00753705fba020
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Combines the following Kconfig options to create PLATFORM_IA32:
PLATFORM_GENERIC_PC
PLATFORM_PCMINUTEIA
PLATFORM_ATOM_N28XX
The new name aligns with the 'arch/x86/platforms/ia32' platform directory.
Change-Id: I4474cb43040f888d5164382184c27bbb38527440
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
1. The new name aligns with the 'arch/x86/platforms/ia32_pci' platform
directory.
2. A shorter prompt works better with menuconfig.
3. Removes IOAPIC selection as HPET_TIMER selection makes it implicit.
4. Removes LINK_AUX_COMPILER_LIBS selection as it does not exist.
5. Removes CPU_MINUTEIA selection to permit CPU_ATOM as a valid choice.
Change-Id: I55694d2594a103f4f5ca233c279df0556ff1327f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates the default platform configuration files as they had not been properly
maintained.
Change-Id: I5f554c287af51f4d7dcf224b7816f40d14c576d4
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates the timer driver dependencies to simplify the selection of a timer
driver. The timer driver menu only lists those drivers that are compatible
with the previously selected interrupt controller.
Change-Id: I5deea315f7c373c6660bacc411c6374e7b0ae84d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the the names of the x86 platforms so that they are more generic.
generic_pc -> ia32
quark -> ia32_pci
NOTE: it is expected that the two platforms will eventually be merged into one.
one. At present, the two platforms support different hardware. For example,
the ia32 supports bluetooth whereas the ia32_pci does not, and the ia32_pci
supports both PCI and HPET whereas the ia32 does not.
Change-Id: I8a980aaef55be8c59f7d19ddeb7fafbf11253408
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This option was remove as part of linker script cleanup
a few months ago.
Change-Id: If04d69096eb3ef682d72258be90bf710ed931e69
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes CONFIG_CPU_PENTIUM4 and CONFIG_PLATFORM_PENTIUM4 as Zephyr does not
support the Pentium4.
Change-Id: Ieb1970894eda184f4c33d03e3563fb08f861ec6c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates Kconfig option names as part of transforming BSPs to platforms.
Change-Id: If397bcac8b058e5700e82c3cabbfe64588316d1d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Use Kconfig to define this variable and remove its
previous definitions from board.h. This will simplify
creation of different variants from a single platform.
Change-Id: I0aaa5aa81dedf096c6d8c1ea2d509c71817336d3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates references to CONFIG_BSP_DIR to CONFIG_PLATFORM as part of the
BSP -> platform clean up.
Note that despite the renaming, the usage of the config option remains
unchanged.
Change-Id: I2846c3f761cf09871019c0855bf1824ae03e6b3c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
also change Zephyr OS to Zephyr Kernel.
Use a script to check and update all default configurations.
Change-Id: I9614d698fd5b7c803590e83a7429403357c09a94
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make device drivers use static interrupt registration procedure.
DYNAMIC_INT_STUBS configuration parameter was used only by device
drivers to switch between static and dynamic interrupt registration
procedures. Now it is obsolete and is removed.
uart_int_connect() function is removed. If UART device driver still
needs to register interrupt dynamically, it should use
irq_connect(uart_irq_get()).
Change-Id: I80c695f337456e9b0c1b0fd56716e35794f7bdb7
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Quark is the preferred target platform for the x86 architecture.
Change-Id: I2bf9bf209a85c93e38ea554e19de3f32813c3a69
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Atom based BSPs now select an atom processor.
Change-Id: Iebe90a60d9e7f2025ce6b23fe918b86cd11fdea7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
- Use Zephyr OS instead of Tiny Mountain
- Update with latest config options and values
Change-Id: I64084c37ce28b25587462468de86e4a904749433
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit add the symbols CONFIG_RANDOM_GENERATOR
to the default configurations.
Change-Id: Iff0e5a7d144993bf1cc9967bcffff037333cdf30
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Anas Nashif