1. Add atcwdt200 options for WDT_NODE in testcase.
2. Add the board overlay file in wdt sample to specify
the watchdog0 alias
Signed-off-by: Kevin Wang <kevinwang821020@google.com>
Add a config "fixture_auxdisplay" to make the samples/drivers/auxdisplay
runnable on a platform, else the application is useless
This fixture will differ from the existing "fixture_display"
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This enables the samples/drivers/spi_flash on quad-spi flash
to run on any stm32 target with external NOR quad flash.
The SPI_FLASH_MULTI_SECTOR_TEST test case is possible with
quadspi too.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the support jedec configuration to run
the jedec sample application. So target board can display
the content of the quad-NOR flash.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add support for communication with serial ports on native POSIX platform
via UART driver API. Serial port driver supports polling API,
configuration of the serial ports used via devicetree and command line
options, and runtime configuration with `uart_configure`.
Multiple instances of the driver are supported.
Example use and configuration is also demonstrated in the
`samples/drivers/uart/native_tty` sample.
Closes: #56586
Signed-off-by: Marko Sagadin <marko.sagadin42@gmail.com>
- Add integration_platforms to avoid excessive filtering
- Make sure integration platforms are actually part of the filter
- Fix some tags and test meta data
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add the '.buffered' field to the dac_channel_cfg structure
when testing the DAC.
This boolean parameter is initialised to 'true' to PASS the test.
It follows the https://github.com/zephyrproject-rtos/zephyr/pull/57730
Also changed for the samples/drivers/dac
Signed-off-by: Francois Ramu <francois.ramu@st.com>
PECI bus sample requires a controller and a target
Intel system(PECI controller) + Embedded controller(PECI target),
where EC HW can be add-on card (mec172xmodular) or onboard EC.
MEC172x EVB is not intended to be connected hence excluding
the platform.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Adds a simple auxdisplay sample which outputs hello world and the
name of the board. A sample overlay is provided for the
nucleo_f746zg board with a Hitachi HD44780-compatible display.
Signed-off-by: Jamie McCrae <spam@helper3000.net>
Adds the AON Timer device in the OpenTitan Earlgrey device tree.
Adds overlay files to enable the watchdog and set the alias to
`watchdog0`.
Adds the AON timer (watchdog part) to the supported features section
of the OpenTitan documentation.
Signed-off-by: Tyler Ng <tkng@rivosinc.com>
This change creates an overlay file so that the adc sample
can be used with da1469x_dk_pro kit.
Both ADC are configured with several channels.
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
- The boards\arm\cy8cproto_063_ble board now has ADC enabled
- This includes overlay files for the test app and sample app
Signed-off-by: Bill Waters <bill.waters@infineon.com>
Add an IVSHMEM Ethernet sample to communicate between Zephyr
and Linux root cell within the Jailhouse hypervisor.
The supported configuration runs the Jailhouse hypervisor
within QEMU Cortex-A53.
Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>
Enable ADC support for RT1040 EVK. Tested using samples/drivers/adc,
using channels 3 and 4 of ADC0.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add the alias to the MX25LM512 octo-NOR flash for the spi-flash node.
Remove the overlay for the samples/drivers/spi_flash as no MDMA driver
exists yet for the stm32h7.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
With the minimal libc moving to using the common malloc implementation,
boards and samples with minimal libc-specific settings need to switch
to using the common malloc settings instead.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
- Added initial version of Infineon CAT1 Flash driver
- Added binding file for infineon,cat1-flash-controller.yaml
- Added overlays for subsys/nvs and drivers/flash_shell
to support cy8cproto_063_ble, cy8cproto_062_4343w boards
- Defined erase-block-size in PSoC6 MPN dtsi.
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
Disable various samples because they require certain digital signals
from the Arduino header, which are not connected when the board is
shipped and therefore not defined via the connector gpio-map.
Signed-off-by: Stephan Linz <linz@li-pro.net>
- This includes the driver, test app, and sample app
- Only the boards\arm\cy8cproto_062_4343w board is supported for now
Signed-off-by: Bill Waters <bill.waters@infineon.com>
As of today it is not possible to use SPI dt-spec macros in C++,
something known and documented. The main reason is because `cs` property
is initialized using a compound literal, something not supported in C++.
This PR takes another approach, that is to not make `cs` a pointer but a
struct member. This way, we can perform a regular initialization, at the
cost of using extra memory for unused delay/pin/flags if `cs` is not
used.
Fixes#56572
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove include of adc dt-bindings header since these are
already included in the root .dtsi file that adds an adc.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
NTC thermistor changes updated the sample app output,
correcting harness string to match sample app.
Signed-off-by: Al Semjonovs <asemjonovs@google.com>
PR https://github.com/zephyrproject-rtos/zephyr/pull/55129 deleted the
"port-sel" property. Delete this property from remaining Microchip SoC
variants and boards.
Test: west build -b mec172xevb_assy6906 samples/drivers/espi/
Signed-off-by: Keith Short <keithshort@google.com>
The `main` function now returns `int` instead of `void` and therefore
must return a value.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This is a follow-up to commit 9fa35bc9a0.
Align specification of the expected console output with the changes
done to the sample in the above commit.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
MISRA Rule 5.7 requires uniqueness of tag identifiers. Shell is
frequently problematic because many code uses `const struct shell
*shell`. This causes CI noise every time one of these shell files is
edited, so let's update all of them with `const struct shell *sh`
instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This applies the coccinelle script to another set of files:
samples/bluetooth/bthome_sensor_template/src/main.c
samples/boards/stm32/power_mgmt/standby_shutdown/src/main.c
samples/drivers/smbus/src/main.c
samples/drivers/virtualization/ivshmem/doorbell/src/ivshmem.c
samples/fuel_gauge/max17048/src/main.c
samples/hello_world/src/main.c
samples/sensor/proximity_polling/src/main.c
samples/subsys/logging/ble_backend/src/main.c
tests/drivers/build_all/mfd/src/main.c
Signed-off-by: Keith Packard <keithp@keithp.com>
Remove RETURN_FROM_MAIN macro which performed control flow, violating
compliance tests. Replace with explicit use of posix_exit_main or return as
appropriate.
Signed-off-by: Keith Packard <keithp@keithp.com>
As both C and C++ standards require applications running under an OS to
return 'int', adapt that for Zephyr to align with those standard. This also
eliminates errors when building with clang when not using -ffreestanding,
and reduces the need for compiler flags to silence warnings for both clang
and gcc.
Most of these changes were automated using coccinelle with the following
script:
@@
@@
- void
+ int
main(...) {
...
- return;
+ return 0;
...
}
Approximately 40 files had to be edited by hand as coccinelle was unable to
fix them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Zephyr SPI driver model for full-duplex operation assumes
data will be transmitted and received during each clock period.
The QMSPI driver for the XEC family also supported dual and
quad I/O use cases which are inherently half-duplex. To
support dual/quad the driver incorrectly processed spi buffers
as all transmit buffers first then all receive buffers. This
worked if only the SPI driver was used. It did not work with
the Zephyr flash SPI NOR driver which assumes SPI drivers
follow the SPI driver model. This commit implements a QMSPI
driver that follows the Zephyr SPI driver model resulting in
a slightly smaller driver. Dual/quad SPI transactions are
supported if the experimental SPI extended mode Zephyr
configuration flag is enabled. We also remove the QMSPI full duplex
driver added previously to support the flash SPI NOR driver.
Added board to spi loop-back test and spi_flash sample.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Jerzy Kasenberg