This sample is intended to show users how they can create a sample which
has dedicated configuration files for extra images included in a build.
MCUboot is used as example on how its default can be adjusted and
MCUboot itself automatically be included in the build when using
sysbuild.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
It's useful for RAMABLE_REGION to have a uniform name when
CODE_DATA_RELOCATION is supported, because otherwise the build system
needs to be aware of how the region name differs between architectures.
Since architectures tend to prefer one of 'SRAM' or 'RAM' for that
region, prefer to use 'RAM' as the more general term.
Signed-off-by: Peter Marheine <pmarheine@chromium.org>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Now that usb device drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Signed-off-by: Kumar Gala <galak@kernel.org>
All IEEE 802.15.4 tests/samples use DT-based filter now, so the
ieee802154 tag can be deleted.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add alias to boards with watchdog enabled to facilitate the
move of samples/drivers/watchdog to use DT_ALIAS.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Extra steps for programming the external memory on nRF5340 DK are
no longer needed. Now west is capable of handling this itself.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Despite the comment it contains, the initialization procedure for
the external memory chip on nRF5340 DK does not enable the High
Performance Mode in the chip, so communication using a frequency
higher than 8 MHz fails and the sample crashes (it works only right
after programming the chip with nrfjprog, which enables the High
Performance Mode, but the chip returns to the Low Power mode after
the board is power-cycled).
This commit fixes the initialization procedure and performs some
additional clean-up.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Files including <zephyr/kernel.h> do not have to include
<zephyr/zephyr.h>, a shim to <zephyr/kernel.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
All the gpio drivers are based on devicetree and thus we always set
HAS_DTS_GPIO, thus we don't need this Kconfig option anymore. Remove
uses as its safe to assume DTS is supported for GPIO.
Signed-off-by: Kumar Gala <galak@kernel.org>
Fix various board fixed-partition definitions where the devicetree cell
has been defined oddly, such as 9 nibbles (which makes no sense since
the cells are 32 bit) or 7 nibbles where all the others are 8.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Linker files were not migrated with the new <zephyr/...> prefix. Note
that the conversion has been scripted, refer to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all samples to the use
the new prefix <zephyr/...>. Note that the conversion has been scripted:
```python
from pathlib import Path
import re
EXTENSIONS = ("c", "h", "cpp", "rst")
for p in Path(".").glob("samples/**/*"):
if not p.is_file() or p.suffix and p.suffix[1:] not in EXTENSIONS:
continue
content = ""
with open(p) as f:
for line in f:
m = re.match(r"^(.*)#include <(.*)>(.*)$", line)
if (m and
not m.group(2).startswith("zephyr/") and
(Path(".") / "include" / "zephyr" / m.group(2)).exists()):
content += (
m.group(1) +
"#include <zephyr/" + m.group(2) +">" +
m.group(3) + "\n"
)
else:
content += line
with open(p, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The autoconf.h header is not required because the definitions present in
the file are exposed using the compiler `-imacros` flag.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The nRF5340dk is shipping an external QSPI flash that can be used to do
XIP from. Extend the code_relocation nocopy sample to support this
platform so that part of the functions are executed from internal flash
and others from external flash.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
* Use case of interest:
Some platforms are shipping in parallel to the internal FLASH some other
storage / external FLASH (usually a QSPI FLASH) that can be used to
execute (XIP) code from.
The content of this external FLASH can usually be written at flash time
using proper tools (see for example the case of the external FLASH on
the nRF5340DK that can be written at flash time using nrfjprog).
The external FLASH is a nice addition that is extremely useful when a
large application code doesn't entirely fit on the internal FLASH so
that we could want to move part of it in the auxiliary FLASH to XIP the
code from there.
* The problem:
Right now Zephyr doesn't have a formal and generic way to move at build
time part of the code to a different memory region.
* The current status:
Zephyr is indeed shipping a code_relocation feature but that doesn't
entirely match our needs.
When XIP is enabled, the code_relocation feature is used in Zephyr to
move the selected code (that is to copy text section, to initialize data
and zero bss) from FLASH to SRAM at run time and execute code from SRAM.
The relocation is done by a generated snippet of code that is
memcpy()-ing the right content to the destination region also using some
build-time generated portions of linker script to retrieve start and
destination addresses and regions.
* This patch:
This patch is leveraging the code_relocation code and adding a NOCOPY
feature. This feature is using the code_relocation feature to
dynamically build the linker script snippets but entirely skipping the
run-time code relocation so that the code can be XIP-ed from the
destination region.
* Example:
Let's say that we have a big file called `huge_file.c` that we want to
XIP from the external FLASH that is mapped in an EXTFLASH region.
In this case we should enable `CONFIG_XIP` and
`CONFIG_CODE_DATA_RELOCATION` and instruct cmake as follows:
zephyr_code_relocate(src/huge_file.c EXTFLASH_TEXT NOCOPY)
zephyr_code_relocate(src/huge_file.c SRAM_DATA)
this means that:
- The .text section of the `huge_file.c` must reside in the EXTFLASH
memory region and we do not need to copy the section there because we
are going to XIP it (and we assume that the file is going to be placed
in the external FLASH at flash time).
- The .data section of the `huge_file.c` must still reside in the SRAM
memory region.
* TODOs:
It's desirable to have the possibility to relocate libraries and
pre-build files instead of source code files.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This platform has a tiny handful of remaining tests that fail. We
will track them as issues, but let's exclude them from integration
testing to allow full runs to complete. Often a hung device in one
test will break an entire twister run.
Tests with known (and tracked) failures:
samples/application_development/external_lib
samples/posix/eventfd
samples/userspace/hello_world_user
tests/kernel/fatal/message_capture
tests/net/socket/socketpair
tests/portability/cmsis_rtos_v2
These tests never fail in isolated testing, but are reliable timeouts
when run in sequence in a big twister run. It's possible that the bug
here may be in twister or the flash/serial scripts:
tests/crypto/tinycrypt
tests/subsys/logging/log_immediate
tests/subsys/logging/log_output
See: #32836
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Set integration_platforms on these samples to just native_posix. This
should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The --nrf-family argument has been unnnecessary since 6628a16
(" runners: nrfjprog: boilerplate and recover rework").
Remove a few stragglers that are still using it, to avoid it being
copy/pasted into other board definitions.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Convert samples to DEVICE_{DT_}DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In the flash partition definitions for ARM boards,
the link to the legacy partition macros does not
exist any more. The commit cleans up the partition
definition by removing this link.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming multiple projects
"NONE" defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names, small, manual adjustments
have been done.
See also 7eabab2f5d ("samples, tests: Use semi-accurate project names")
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
The length field for the MCUBOOT slot partitions in Nordic platforms
has always had an extra leading zero suggesting it's a 40-bit value,
being stored in a 32-bit field. Remove the incorrect leading zero to
reduce misunderstanding of the field.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Use a complete identifier, first two parts are section.subsection, then
at least another part for the specifics being tested.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The SoC node has compatibles for the specific SoC in place, having the
same compatible at the top level is technically a conflict and the
top-level one should really just be about the board. Remove the SoC
related compatibles at the top-level.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove prompts from Kconfig options `UART_x_NRF_UART*` that select
the type of nrfx driver (for UART or UARTE peripheral) to be used
for a given instance. This prevents the options from being modified
from configuration files.
Instead, make one of these options selected by default according to the
"compatible" property set for the corresponding UART node in devicetree.
This eliminates the need of changing both the "compatible" property in
devicetree and the Kconfig option selecting the driver type when a user
wants to switch between UART and UARTE for a given instance.
Since all `UART_x_NRF_UART*` options are made "hidden" by this commit,
all their occurrences in configuration files are removed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Torsten Rasmussen