With the new Kconfig preprocessor (described in
https://github.com/torvalds/linux/blob/master/Documentation/kbuild/
kconfig-macro-language.txt), the syntax for expanding environment
variables is $(FOO) rather than $FOO.
$(FOO) is a general preprocessor variable expansion, which falls back to
environment variables if the variable isn't set (like in Make). It can
also be used in prompts, 'comment's, etc.
The old syntax will probably be supported forever in Kconfiglib for
backwards compatibility, but might as well make it consistent now that
people might start using the preprocessor more.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The latest mbedTLS (2.12) release increased resources requirements on
Zephyr, so it was required increasing the minimum SRAM to run this test
and the main stack size.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
While it's possible to define which mbedTLS config header to use, our
samples should use config-tls-generic.h as default because this header
is configurable through Kconfig.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
WDT_NRFX is now enabling by default. Its configuration from proj.conf
files was removed.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Add a sample application to show the LP5562 driver. The three RGB
channels are used to set multiple colors after each other under the
assumption that accordingly colored LEDs are connected. Blinking is also
shown in multiple colors.
Signed-off-by: Johannes Hutter <johannes@proglove.de>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This will make adding properties to symbols in the base Zephyr Kconfig
files work the same as before.
I didn't actually spot any such cases, so this is just to play it safe.
It also makes the sample Kconfig symbols appear at the top in the
menuconfig interface, which might be nice.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add sample application for NXP PCA9633 LED driver. This application
test the 4 LEDs by doing the following:
- turn on LEDs
- turn off LEDs
- set the brightness to 50%
- turn off LEDs
- blink the LEDs
- turn off LEDs
The application is based on the stm32373_eval board and expects to have
a PCA9633 LED driver on the bus I2C-1 at the address 0x62.
Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
The ARRAY_SIZE() utility macro will actually test the parameter types,
and ensure that it is only called with arrays, and not arrays decayed
to pointers.
Changes were performed with a simple Coccinelle script.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Some changes were made in the sample implementation that made the test
fail due to differences in the expected output.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Find the device and query its capabilities just once at boot, then
go through a list of tests to perform.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Printing the output length for all encryption/decryption operation will
make it easier to know if a particular crypto driver shim provides this
information. TinyCript and mbedTLS were not providing this, making the
out_len field useless.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Add hardware dependencies and filters to make sure we do not explode if
for example we try to build a sample/test using rtc when the platform
does not support that.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change the flash_shell sample from using FLASH_WRITE_BLOCK_SIZE
definition to using the flash_get_write_block_size() api for the
selected flash_device.
This fixes the flash_shell sample when using multiple flash devices
with different write block sizes.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add sample application for TI LP3943 LED driver. This application
displays a continuous pattern that turns on 16 LEDs at 1s one by
one until it reaches the end and turns off LEDs in reverse order.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Following tests were failing on a microcontroller with 32KB flash:
test-mbedtls
kernel.common
The min_flash option has been added in the test case yaml files.
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
With upcoming ICs that are not in the nRF5x family, rename the flash
driver and all its dependencies from nrf5 to nrf.
Should also fix the issue introduced by f49150cab6 which broke the
assignment of the flash device due to a partial rename.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add support for building the WS2812 LED strip driver sample against
the new ws2812b_sw driver. Currently a configuration is only provided
for the BBC micro:bit board.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When testing whether the CTR mode decrypted the payload properly, a
comparison of `decrypt.out_buf` with the known plain text `plaintext`
is performed, but the buffer comparison that is printed uses
`plaintext` and `encrypt.out_buf` instead.
Coverity-CID: 181847
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Replace seldom occurrences of FLASH_DRIVER_NAME by equivalent
and commonly used FLASH_DEV_NAME.
Fixes#5919.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The expected order for heading levels in our ReST documents is # for H1,
* for H2, = for H3, and - for H4. Some documents snuck in without
following this guideline.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
We want to move to use a common FLASH_DEV_NAME across the various flash
drivers. So samples, tests, or other code can be a bit more generic. So
replace CONFIG_SOC_FLASH_NRF5_DEV_NAME with FLASH_DEV_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Those are added by sanitycheck, no need to have them enabled in the
project by default.
CONFIG_DEBUG is causing issues on qemu_nios2, see #5743.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The output of those samples can be parsed and verified by sanitycheck,
so lets use the console harness for this.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
By default CONFIG_MPU_ALLOW_FLASH_WRITE=n so the example must have been
falling on any write to flash.
This patch adds CONFIG_MPU_ALLOW_FLASH_WRITE=y to project configuration.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Remove SPI_*_IRQ_PRI from tests and samples.
Using DT to get the *_IRQ_PRI, we can't
override it using Kconfig.
If needed, use a BOARD_NAME.overlay file to
override default values.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Ulf Magnusson