The Kconfig IWDG_STM32_START_AT_BOOT is actually not used and the
watchdog is enabled unconditionnally at init.
Enable the watchdog only if CONFIG_IWDG_STM32_START_AT_BOOT is set.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Add the necessary Kconfigs and supporting code to enable I2C4 which can
be found on certain STM32L4.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
TimerHandle->Init.Period is used to initialize TIMx ARR register. The
timer will count from 0 up to ARR including, thus it will tick
(ARR + 1) timers per period. As the "period_cycles" variable holds the
number of desired ticks, the ARR register is computed as
ARR = period_cycles - 1
Update the code to reflect this relationship. Otherwise the timer will
count one more tick for each period, leading to a wrong PWM frequency.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
We get the following warning with CONFIG_DYNAMIC_OBJECTS=n in
_impl_k_object_alloc:
include/kernel.h:322:57: warning: unused parameter ‘otype’ [-Wunused-parameter]
static inline void *_impl_k_object_alloc(enum k_objects otype)
^~~~~
Simple fix is to ARG_UNUSED otype.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fixes wildcard for nxp socs so we match kinetis, lpc, and imx families.
Updates ext/hal/nxp/ to match mcux and imx hals.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The implementation of fwrite() in the minimal libc does not increment
the source pointer, and thus always print the same character.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Declare and implement convenience wrappers to evaluate read and
write permissions of C variables using the cmse address range
intrinsics.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit contributes the implementation of the
CMSE address range permission checks based on the
ARMv8-M address range check intrinsics.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Select CPU_CORTEX_M_HAS_CMSE in ARMV8_M arhitectures.
Option ARMV8_M_BASELINE is introduced for this purpose,
so that CMSE API is enabled for both Cortex-M23 and
Cortex-M33 MCUs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit defines and implements an internal ARMv8-M API
that allows the user to evaluate access permissions of memory
locations, based on the ARMv8-M Test Target (TT) instruction
support.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When the IV Update state enters Normal operation or IV Update in
Progress, we need to keep track of how many hours has passed in the
state, since the specification requires us to remain in the state at
least for 96 hours (Update in Progress has an additional upper limit
of 144 hours).
In order to fulfil the above requirement, even if the node might be
powered off once in a while, we need to store persistently how many
hours the node has been in the state. This doesn't necessarily need to
happen every hour (thanks to the flexible duration range). The exact
cadence will depend a lot on the ways that the node will be used and
what kind of power source it has.
Since there is no single optimal answer, this patch adds a new
configuration option, which allows specifying a divider, i.e. how many
intervals the 96 hour minimum gets split into. After each interval the
duration that the node has been in the current state gets stored to
flash. E.g. the default value of 4 means that the state is saved every
24 hours (96 / 4).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Majority of "accessing Internet" setup is the same for both QEMU and
real boards connected to host, mention that explicitly. Be more
precise that networking settings require net_app_settings API, not
entire net_app. Finally, add information about DNS setup for the
samples requiring it.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If coap-client(e.g. RPL BR) wants to get notifications from
coap-server(RPL-node) about parent status, client has to register
observer for notifications.
RPL node application modified to toggle the LED. Do not maintain any
ON/OFF states. Also removed Sparrow (contiki border router) related
patch.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add CoAP client to RPL BR application. Which can be used to
control leds and get rpl related information from leaf nodes
though CoAP messages. Build toplogy matrics and send it to
Web UI.
Enhanced Web UI components (Interfaces, RPL, Neighbors, Routes
and Topology tabs). Added buttons to control leds on lead nodes.
Added JSON support to handle led on/off requests from UI.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This is a very simple RPL border router sample application.
It provides HTTP(S) and net-shell interface for getting admin
information about neighbors and routes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
ACK frames are handled on hardware level, so let's expose this
capability in order to avoid L2 waiting for these.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will be useful for OpenThread, drivers will need to implement that
fonction to be able to proceed with ED.
Fixes#5714
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
L2 could take advantage of such hardware capability, when supported by
the device. This is also required for OpenThread.
Fixes#5714
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This patch fixes some bugs found during testing with testusb from
linux kernel.
An unresolved issue is that the stack is not fast enough
to stall (if necessary) the control endpoint during Setup Stage.
This might require a API change so that the usb device stack
can explicit allow the driver to resume token processing.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Exclude usb_kw24d512 from wpanusb sample until the the sample
has been reworked and is more generic.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Set bus master 4 to write and read access which allows
the USBFSOTG controller read/write access to the memory.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The settings_init() API was protected against multiple calls, but the
only function that calls it, settings_subsys_init(), was not. Add the
protection to the higher-level function as well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enabling relevant hardware, currently only winc1500 on
quark_se_c1000_devboard. But it could be easily extended to other
drivers/boards.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There will be other drivers, and mixing up all these files together will
create a mess so better having a dedicated place for winc1500, at least.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This cleans up the callback functions and isolate each part to a
relevant handler to improve readability.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This call is already made in nm_bus_wrapper along with SPI.
In nm_bus_wrapper however: moving the call out of #ifdefsf as it is
generic call, whatever bus would be choosen.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no point having undocumented and local config options when
Kconfig can be used to expose these relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Previous way was cumbersome (based on an old way for cc2520 actually),
so moving towards the more recent and proper way.
This will enable anybody to actually provide gpio configuration for a
winc1500 out of any board specific location.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adding support for WINC1500 WiFi chip.
It introduces the wifi drivers sub-directory.
It provides a Full-MAC for 802.11 and an offloaded network stack as
well. The driver uses Atmel's winc1500 HAL.
Signed-off-by: Dario Pennisi <dario@iptronix.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Massimiliano Agneni <massimiliano.agneni@iptronix.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
TI's ADC108S102 is a sampling on 16 bits, and thus requires the
destination buffer to be made of an even number of bytes.
Fixes#7389
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Be more obvious about the entropy_native_posix driver
being only a test utility which does not generate real
entropy.
Fixes: #6388
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
To avoid another thread from modifying the spi_buf_set and spi_config
structures passed to the spi_transceive() syscall, copy those to the
kernel stack before validating.
Fixes#7378.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Use zephyr-app-commands for portability instead of assuming Make and
Unix, and add a missing "run" goal.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Use zephyr-app-commands for portability instead of assuming Make on
Unix, also adding a missing "flash" invocation.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
This used to be done by hand but can easily be generated like
we do other switch statements based on object type.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Florian Vaussard