The existing device_set_power_state() API works only in synchronous
mode and this is not desirable for devices(ex: Gyro) which take
longer time (few 100 mSec) to suspend/resume.
To support async mode, a new callback argument is added to the API.
The device drivers can asynchronously suspend/resume and call the
callback function upon completion of the async request.
This commit adds the missing callback parameter to all the drivers
to make it compliant with the new API.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Maybe this is some "just in case" thing that got copied around. There's
no need to have a blank line at the beginning or end of Kconfig files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The two redundant SPI dependencies are from 'source'ing a file within an
'if SPI' and then adding another 'depends on SPI' within it.
'if FOO' is just shorthand for adding depends on FOO to each item within
the 'if'. There are no "conditional includes" in Kconfig, so 'if FOO'
has no special meaning around a source. Conditional includes wouldn't be
possible, because an if condition could include (directly or indirectly)
forward references to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Rephrase prompts for a few options in drivers/spi/Kconfig.nrfx
so that their purpose is presented a bit better.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In Nordic SoCs, SPI and TWI peripherals with the same instance number
share certain resources and therefore cannot be used at the same time
(in nRF91 Series this limitation concerns UART peripherals as well).
This patch adds Kconfig checks ensuring that only one of such mutually
exclusive peripherals can be enabled.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This patch adds missing SPI_3_NRF_SPIS Kconfig option (referenced by
`ext/hal/nordic/nrfx_config_nrf9160.h`, although not defined anywhere)
and adds support for SPIS3 instance in the nrfx_spis driver shim.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Coverity scan found issue with a missing 'break' statement. Fix
push_data by adding the break after handling the 1 byte case.
Coverity CID: 190978
Fixes#13842
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
The spi mcux_lpspi driver has been using non DT_ prefixed defines for
DT generated defines. Switch to use DT_ prefixed ones as we want to
deprecated the non DT_ prefixed defines.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Instance 2 & 3 for some reason never transitioned CONFIG_SPI_*_IRQ_* to
DT prefix. Fix that since those Kconfig symbols will never exist.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add SPI_6 Kconfig symbol as this is the higher supported instance on
STM32.
This makes symbol CONFIG_SPI_6, used in stm32 driver a valid symbol.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Use separate bindings for nRF Family SPI Slaves and SPI Masters so that
the properties "csn" and "def-char" can be made required for Slaves
(for Masters such settings are not applicable), and to avoid confusion
between the properties "csn" and "cs-gpios" for Master nodes.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The driver was defining a macro with a CONFIG_ prefix but this wasn't
coming from Kconfig. Change the macro name not to conflict with the
Kconfig CONFIG_ namespace.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
initialize both tx and rx in the spi_sam0 driver. Make the spi_sam
driver look the same by splitting the declaration into 2 lines.
Discovered with gcc 8.2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make the following nRF peripheral drivers:
- ADC
- GPIO
- I2C
- SPI
- UART
- USB_DEVICE
enabled by default so that users do not need to explicitly enable them
in their applications after choosing an nRF SoC as the build target.
Kconfig options enabling these drivers depend on both a given hardware
feature (e.g. I2C) and an nRF family SoC selected, so effectively they
will be automatically enabled only when it is adequate (and in most
cases these drivers are the only option for a given hardware feature
on nRF SoCs).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Check clock_control_on return value now that it is checking appropriate
bus is used in the request.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
When users are configuring applications they are given the option
to enable the DesignWare SPI driver. But they should not be given this
option on SoCs that don't have the DesignWare SPI HW.
This commit hides the driver by default by introducing the config
option HAS_SPI_DW.
Fixes: #10825
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If the configuration is already installed, there will no need to
reconfigure the controller all over again.
This was missing for mcux_dspi, mcux_lspi, sam and sam0.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
All drivers require DTS for their primary SPI settings.
Removing SPI_[0-9]_NAME config option added some more samples changes.
Usage of these options there was anyway not relevant.
Fixes#11064
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In order to avoid changing the signature of spi_context_cs_control
function, which is used in every driver, let's just make it an alias to
a new version.
Fixes#10344
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Move to using Kconfig (like other Atmel SAM drivers do) to specify the
pinmux setting for SAMe70 SoCs. Updated the sam_e70_xplained board to
set the default in Kconfig.defconfig instead of via board.h
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
k_poll_signal was being used by both, struct and function. Besides
this being extremely error prone it is also a MISRA-C violation.
Changing the function to contain a verb, since it performs an action
and the struct will be a noun. This pattern must be formalized and
followed and across the project.
MISRA-C rules 5.7 and 5.9
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Configure spi chip select based on pinmap defines, add support
for hardware chip select control support.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Following log subsystem rework, a warning poped-up in SYS_LOG_ERR
in spi_stm32_get_err macro.
Fix it by casting SPI_STM32_ERR_MSK on (u32_t)
Fixes#10380
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Ramakrishna Pallala