Commit fd65800 introduced a regression for the counter_basic_api test for
STM32 by using a Silabs Gecko Kconfig to enable the STM32 RTC.
This commit uses the proper STM32 Kconfig for the RTC instead.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
The 'Creating an Application' section has existed for several years
and predates the introduction of the example-application repository.
It's still a good reference, but it's not really the easiest way to
make an applications any more. Judging by experience watching users
ask questions and receive support on Discord, the example-application
repository is serving its purpose as a better 'pre-cooked' starting
point.
Adjust the hierarchy so that there's a single, parent section about
creating applications, which has using example-application as one
alternative, and doing it by hand as a less-recommended option. Add
more text on exactly what you need to do with example-application to
get something you can actually use.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
The 'Example Application' text is similar to but not the same as the
name of the repository, which is example-application. Use the name of
the repository instead. This is easier to search for and plants seeds
in people's memory about where to find it on GitHub.
Add more cross references.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Add more cross-references to the overview and make a few other
improvements. In particular, adapt to David Kinder's recommended
style (lowercase 'zephyr' for the repository, capitalized 'Zephyr' for
the more general software distribution).
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
A few things are stale or missing:
- Using the term 'kernel' is outdated at this point. It's been years
since Zephyr was just a kernel, and we now include many modules as
well as our internal subsystems and driver layers. Make that clearer
in the overview.
- Devicetree overlays are a basic piece of zephyr applications and
they're worth highlighting at this introductory place as well. Note
that neither app.overlay or prj.conf are actually required to be
present, so if we're mentioning prj.conf here, we might as well
mention app.overlay too.
- Explain the basic purpose of and differences between Kconfig
fragments and DT overlays.
Clean up some other language and provide some more cross references.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
It is well known that putting your application inside the west
workspace where zephyr is installed, i.e. defining a workspace
application, makes it easier to use west build, since you don't have
to juggle setting ZEPHYR_BASE appropriately.
Therefore, recommend doing thing this way, while leaving a hint about
how to do something else.
The current state of affairs where the application is assumed to be in
$HOME/app is longstanding and precedes the introduction of west to
zephyr, and I think it's overdue for the page to get with the times
and use conventions that work well with west: our reference
application has been a workspace application for almost 2 years at
this point.
Create a new meta-variable <app> to describe the location of the
application to keep things short and make it clearer that the actual
location on the file system doesn't matter as long as things are set
up properly.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Now that compatible is directly linked with driver version,
use DT compat based Kconfig flag to build the correct flash driver
version.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Instead of introducing a vX driver version, use series name.
With this commit F0, F1, F3, L0 and L1 series are using F1 flash driver.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add support for RT595 evk to adc driver sample. RT595 uses external
reference voltage, which is set to 1.8V on this board.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Instead of relying on STM32Cube API, use clock_control framework
for clock configuration inside this driver.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Purpose of this node is only to provide a way to configure RF
clock using device tree and clock_control driver.
Default configuration is reproducing existing hard-coded configuration.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In preparation of the introduction of dt configured clock in this
driver, refactor clock related clocks.
- remove start_ble_rf()
- Move IPCC clock activation in c2_reset()
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
As long as LSE clock is set in device tree, configuration will be
done in clock control driver, no need to do it here.
Besides, remove back up domain related code as this is also already
handled in clock_control driver.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Remove code related to LSI used as clock source for RF wakeup,
it isn't a valid clock source.
Also don't disable LSI when LSE is selected.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update the SBS Gauge driver that implements the fuel_gauge API to implement
a set_property function allowing the writing of an SBS word to the
manufacturer access register per the SBS spec.
Includes an update to the SBS Gauge emulator and SBS fuel gauge tests to
weakly verify the code runs.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Fix SBS I2C transfer emulation to accept reads and writes of 16 bit words
as defined by the SBS spec. This change is tested by a following commit
that implements writing and subsequently reading a written SBS property.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Add fuel_gauge_set_property function to the fuel gauge API with starting
writable property of SBS specific manufactuer access.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Implement and weakly test fetching the manufacturer access word from an SBS
compatible fuel gauge.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
The macro BT_CONN_INTERVAL_TO_MS was used a fair amount
of places, but it often was used with integers. This meant
that sometimes the resulting (integer) value would be
incorrect, as something like 7.5ms interval would not
be properly stored as a integer in millisecond units.
Adding BT_CONN_INTERVAL_TO_US allows users to still use
integers to store the result, but in a more accurate unit.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update TF-M version which remove the downstream patch and replaces it
with the upstream TF-M patch for masking MBedTLS build warning of
unused const variable.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Since main was only registering the Test Suite, it made since
to combine the actual tests into one file instead of having
an empty file to initialize the test.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
The test was executing the expected functions
out of order. I have created a config functions
and explicitly declared them to be setup functions
for this ZTest framework.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
The I2S Speed test attempted to find a device
via the Label Property of the node. I have updated
the code to search for the nodelabel instead.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Adding overlay files that give an alias name to the
i2s node that is equivalent to the alias in the
i2s speed test.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Test had by accident an early return and after removal case was failing
in certain configurations. It was failing because set of long messages
was not fitting into the logging buffer used in the test. Fixed the
test by adding more frequent processing between the messages.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
At least one static analysis tool is flagging a potential NULL
derefence in sys_clock_announce()'s tick processing loop where the
routine 'first()' is concerned. In practice, this does not occur as
...
1. The code in question is protected by a spinlock.
2. 'first()' does not change the contents of anything.
The code has consequently been tweaked to prevent similar such false
positives in the future.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
stm32cubeprogrammer runner takes a --reset-mode argument to specify the
type of reset used in the flashing process.
Though, argparse default configuration in python allows shortened command
arguments and it happened that --reset was used on most boards instead
of --reset-mode.
This argparse configuration is being changed in order to prevent shortened
command args (see #53495). As a consequence all board configs using
--reset should be updated to use the full length version.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The IPv4 autoconfiguration feature relies on the fact, that autoconf
ARP packets are always prepared by the ARP module. After recent ARP
refactoring though that could no longer be the case due to packet
queueing mechanism. This could lead to net pkt leaks in the autoconf
module.
Fix this by skipping the pending packet queue for autoconf packets.
Since for autoconf ARP requests there's no really a pending packet
to queue, it can be safely avoided. This results in the ARP request
being always sent for the autoconf case, preventing the packet leak.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Check data buffer size and return error if
* buffer size is too small for opaque or string data type
* buffer size is not equal to res data length when data type
is fixed size
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
This fixes possible ASE state race condition. The notification is sent
immediately once the ASE state changed that eliminates a situation where
the state was changed by user action (API function call) when the state
was not yet notified to the remote Unicast Client.
Fixes: BAP/USR/SCC/BV-158-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Current divisor is 10000000 (should be 1000000).
For example, ESP32_CLK_CPU_240M / 10000000 == 24 MHz (incorrect).
Signed-off-by: Chris Wilson <christopher.david.wilson@gmail.com>
Guillaume Gautier