I think people might be reading differences into 'if' and 'depends on'
that aren't there, like maybe 'if' being needed to "hide" a symbol,
while 'depends on' just adds a dependency.
There are no differences between 'if' and 'depends on'. 'if' is just a
shorthand for 'depends on'. They work the same when it comes to creating
implicit menus too.
The way symbols get "hidden" is through their dependencies not being
satisfied ('if'/'depends on' get copied up as a dependency on the
prompt).
Since 'if' and 'depends on' are the same, an 'if' with just a single
symbol in it can be replaced with a 'depends on'. IMO, it's best to
avoid 'if' there as a style choice too, because it confuses people into
thinking there's deep Kconfig magic going on that requires 'if'.
Going for 'depends on' can also remove some nested 'if's, which
generates nicer symbol information and docs, because nested 'if's really
are so simple/dumb that they just add the dependencies from both 'if's
to all symbols within.
Replace a bunch of single-symbol 'if's with 'depends on' to despam the
Kconfig files a bit and make it clearer how things work. Also do some
other minor related dependency refactoring.
The replacement isn't complete. Will fix up the rest later. Splitting it
a bit to make it more manageable.
(Everything above is true for choices, menus, and comments as well.)
Detected by tweaking the Kconfiglib parsing code. It's impossible to
detect after parsing, because 'if' turns into 'depends on'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Introduce HAS_NEWLIB_LIBC_NANO Kconfig option that the toolchain
specific Kconfig (gnuarmemb & zephyr 0.11) can select to convey that the
feature is supported.
This removes the need to if protect the NEWLIB_LIBC_NANO Kconfig with:
if "$(ZEPHYR_TOOLCHAIN_VARIANT)" = "gnuarmemb"
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Severely memory constrained systems with known allocation patterns can
benefit from providing their own implementation of malloc with
specifically tuned bucket sizes. Provide a switch to allow users to
replace the default malloc implementation with their own.
Signed-off-by: Josh Gao <josh@jmgao.dev>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This prevents MINIMAL_LIBC from being selected by the user (in the
menuconfig or in a configuration file) when REQUIRES_FULL_LIBC is y.
'default' on a choice only determines the default selection, not what
symbols can be selected.
It's helpful to think of Kconfig in terms of someone going into the
menuconfig and making changes.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The ARM embedded toolchain has 2 newlib based libc build variants, one
that utilizes the "nano" configuration which is more in line with the
Zephyr SDK. Make the "nano" cfg the default if newlib is enabled to
match closer how the Zephyr SDK behaves.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds the necessary bits to utilize the x86_64 toolchain
built by sdk-ng for x86_64 when toolchain variant is either
zephyr or xtools. This allows decoupling the builds from
the host toolchain.
Newlib is also available with this toolchain so remove
the Kconfig restriction on CONFIG_NEWLIB_LIBC.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This allows for printing long long values. Because the code size
increase may be significant, this is made optional on 32-bit targets.
On 64-bit targets this doesn't change the code much as longs and
long longs are the same size so it is always enabled in that case.
The test on MAXFLD has to be adjusted accordingly. Yet, its minimum
value wasn't large enough to store a full-scale octal value, so this
is fixed as well.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Add an option for building with newlib-nano library.
The newlib-nano library for ARM embedded processors is a part of the
GNU Tools for ARM Embedded Processors.
Add mem_alloc tests with newlib nano.
Signed-off-by: Benoit Leforestier <benoit.leforestier@gmail.com>
The intent of this Kconfig is to allow libc stdout
functions like printf() to send their output to the
active console driver instead of discarding it.
This somehow evolved into preferring to use
printf() instead of printk() for all test case output
if enabled. Libc printf() implementation for both
minimal libc and newlib use considerably more stack
space than printk(), with nothing gained by using
them.
Remove all instances where we are conditionally
sending test case output based on this config, enable
it by default, and adjust a few tests that disabled
this because they were blowing stack.
printk() and vprintk() now work as expected for
unit_testing targets, they are just wrappers for
host printf().
Fixes: #13701
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Also, for now x86_64 does not support newlib, so do not enable newlib
for this arch until we have a solution.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Consistently use
config FOO
bool/int/hex/string "Prompt text"
instead of
config FOO
bool/int/hex/string
prompt "Prompt text"
(...and a bunch of other variations that e.g. swapped the order of the
type and the 'prompt', or put other properties between them).
The shorthand is fully equivalent to using 'prompt'. It saves lines and
avoids tricking people into thinking there is some semantic difference.
Most of the grunt work was done by a modified version of
https://unix.stackexchange.com/questions/26284/how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some
of the rarer variations had to be converted manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Also simplify the default on STDOUT_CONSOLE. Defaults can be arbitrary
expressions, not just fixed values.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
When we introduced NEWLIB_LIBC_ALIGNED_HEAP_SIZE in commit
42a2c96422. We accidently had the Kconfig
symbol depend on CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT the leading
'CONFIG_' shouldn't exist.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
MPU devices that enforce power-of-two alignment now
specify the size of the buffer used for the newlib heap.
This buffer will be properly aligned and a pointer
exposed in a kernel header, such that it can be added
to a user thread's memory domain configuration if
necessary.
MPU devices that don't have these restrictions allocate
the heap as normal.
In all cases, if an MPU/MMU region needs to be programmed,
the z_newlib_get_heap_bounds() API will return the necessary
information.
Given how precious MPU regions are, no automatic programming
of the MPU is done; applications will need to do this as
needed in their memory domain configurations.
On x86, the x86 MMU-specific code has been moved to arch/x86
using the new z_newlib_get_heap_bounds() API.
Fixes: #6814
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Enable stdio to work by default if Newlib is used as libc - it's
reasonable expectation that if full-fledged libc (like Newlib) is
selected, then printf() works out of the box.
Fixes: #5566
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When building a native application, we use the host provided libc, so do
not build minimal libc or newlib.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Moved all libc Kconfigs to where the code is and remove the default
Kconfig for selecting the minimal libc. Minimal libc is now the default
if nothing else is configured in.
Removed the options for extended libc, this obviously was restricting
features in the minimal libc without a good reason, most of the
functions are available directly when using newlib, so there is no
reason why we need to restrict those in minimal libc.
Jira: ZEP-1440
Change-Id: If0a3adf4314e2ebdf0e139dee3eb4f47ce07aa89
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Ulf Magnusson