Updated hal_nordic fixes APPROTECT handling on nRF91 target,
as well as fixes missing alignment of nrfx samples
to modified API of the GPIOTE driver.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Add COAP_RESPONSE_CODE_TOO_MANY_REQUESTS to coap_header_get_code(). CoAP
4.29 response code for "Too many requests" is defined in coap.h but was
missing from the list of cases, resulting in a 0 being returned instead
of the proper code.
Signed-off-by: Mike Szczys <mike@golioth.io>
When exiting PM_STATE_SOFT_OFF, the primary core state is always
used to restore bootctl register and the clock and power gating
settings.
This can lead to problems if non-primary core is powered up and down
many times before primary core 0 is powered down the first time.
The saved state in core_desc[0].bctl will be null, and as a result-
power gating and clock gating is not disabled correctly for
non-primary cores.
Link: https://github.com/thesofproject/sof/issues/8642
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Adds reference to new Kconfig,
CONFIG_NORDIC_QSPI_NOR_TIMEOUT_MS,
enabled by updates to nrfx.
Reference: zephyrproject-rtos/zephyr#66711
Signed-off-by: Helmut Lord <kellyhlord@gmail.com>
data->rtc_base is not being used anywhere while data->rtc_registers is
only used as a temporary variable. Remove them from the driver.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
Add to management subsystem section of release notes:
- Fix image confirm for Direct XIP
- Support for finding registered command groups
Signed-off-by: Ben Marsh <ben.marsh@helvar.com>
Compilation error "undefined reference to log_const_lvgl"
happened in lvgl_keypad_input.c when trying to get logs with
lvgl keypad module. Fixed by adding log level parameter
in log module macro.
Signed-off-by: Eve Redero <eve.redero@gmail.com>
Add a Kconfig option for enabling `MBEDTLS_PLATFORM_ZEROIZE_ALT`, which
is required if the mbed backend already provides an implementation.
For example, the Nordic cryptocell precompiled backends.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Resolves incorrectly located `image_ok` tag in generated hex files when
CONFIG_MCUBOOT_GENERATE_CONFIRMED_IMAGE is used.
Fixes#64098
Signed-off-by: Abram Early <abram.early@gmail.com>
Prevent overrunning the irq vector table.
This is not happening today in tree, but coverity thinks it
may. Checking for it to prevent it is not a bad idea
anyhow, so let's do it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The sensor-based illustration example did not consider the HLP feature
and used the work queue to publish to the Trigger channel. With the HLP,
that is not necessary anymore. The timer ISR can publish to the channel
directly. So, this commit improves the example description by
considering the HLP feature.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
Commit 3fbf12487c introduced a way
to add to CONFIG_HEAP_MEM_POOL_SIZE if, for example, subsystems
need more heap space. However, the size check in obj_validation
was still using the old kconfig, and was failing when extra
space was specified. So update the size check to use the updated
size.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The bt_iso_chan_send function could take an optional
timestamp by using 0 as an indicator. The issue with
this approach was that a timestamp value of 0 is valid,
and could cause potential issue with syncing streams
in a group.
To fully support transmitting with and without timestamp,
bt_iso_chan_send_ts has been introduced, which is the only
function of the two (bt_iso_chan_send being the other) that
supports timestamps.
A new function, rather than adding a boolean to the existing,
was chosen as it simplifies the individual functions as well
as making it more explicit what the function does.
Since the bt_iso_chan_send function is used by LE audio, both
the BAP and CAP send functions have similarly been updated.
Likewise, all tests and samples have been updated to use the
updated function(s), and BT_ISO_TIMESTAMP_NONE has been
removed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
UART_RX_RDY event can be generated from UARTE interrupt or k_timer
handler. When ENDRX event occurs then k_timer is stopped (it can
be restarted if there is another buffer provided). However, if UARTE
interrupt priority is higher than k_timer priority (RTC is used
underneath) then k_timer handler may still be executed later.
K_timer notifies new bytes based on RXDRDY HW event which is
counter by the TIMER (using PPI). It may happen that RXDRDY
event arrives due to byte received into RX FIFO but since there is
not buffer provided it stays in that FIFO. Given all this, it
was possible that RX_RDY event was reported from ENDRX UARTE event,
timer was stopped but because UARTE interrupt had higher priority
timer handler is executed after UARTE interrupt is handled. In
timer handler TIMER counter reports more bytes and calls
UART_RX_RDY event with null buffer and non-zero amount of bytes.
Fixed by generating UART_RX_RDY event only if RX buffer is not
null.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
i2c pads were incorrectly configured and failed to work when testing
against an external fram part. Correct the i2c pinctrl settings for
arduino i2c to match other boards in the mimxrt lineup.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
This adds the Adafruit QTPy RP2040 and the Wiznet W5500 Evaluation Pico
boards to the 3.6 release notes.
Signed-off-by: Ian Wakely <raveious.irw@gmail.com>
The calculation for BASE_SUBGROUP_MAX_COUNT was off by one.
The macro did not consider the non-subgroup parameters of
the BASE that take up space. This effectively modifies
BASE_SUBGROUP_MAX_COUNT to be 24 instead of 25.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
No need to check if an uint8_t is greater or equal 0 in
lp50xx_set_brightness.
Fixes CID 322654
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
A bug was introduced with the TF-M 2.0 update. Patches have been
submitted to the TF-M upstream and were also applied to the Zephyr
fork.
Details on the patches applied:
Platform: nxp: Add initialization flag to the CMSIS USART driver.
Avoid possible USART_Deinit() stuck found in Zephyr TFM MCUBoot.
From Upstream TFM:SHA: I1f6c19c3e7e5556423ddf3aec7555ff44ed7e562
Crypto: Add FPU flags for p256m
Fixes build error in #67751
From Upstream TFM:SHA: I4ed6f6ac7c1f52fb5ced18f0006dd3eb7a6a7359
Fixes#67751
Signed-off-by: David Leach <david.leach@nxp.com>
Add clarifications to mipi-dbi bindings to avoid the confusion
between two options, write-only and duplex.
Signed-off-by: Eve Redero <eve.redero@gmail.com>
By default variable context.sh is set to NULL. If any net_mgmt
event will be called when the variable has default value, there
will be a system exception.
Signed-off-by: Wojciech Slenska <wsl@trackunit.com>
Currently, the only thread-safe part of the IPv6 Neighbor processing
implementation are stale_counter related operation.
Fix this, by extending the mutex protection over all of the module, so
that message handlers, timers and API functions do not interfere with
each other.
As IPv6 Neighbor cache is tightly coupled with the Routing module, use
the same mutex to protect both, neighbor and routing tables, to prevent
deadlocks.
Also, replace the semaphore used with a mutex, as it seems more fit for
this particular job.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Mental arithmetic shouldn't be required to analyze logs.
With this, a user can just "grep" the Bluetooth tree for the opcode
reported in an HCI error.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Disable randomization at the access layer in the Remote Provisioning
server when sending Link Stauts message as a responce on Link Close
message and then sending Link Report message right after it. Because of
the randomization, the report message is sent before the status message
which makes MESH/SR/RPR/PDU/BV-03-C test to fail.
This fixes MESH/SR/RPR/PDU/BV-03-C test.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Disable randomization in the access layer when cancelling update in the
distribution server model. This is needed because the server sends 2
messages in a row and the gets reordered by the access layer
randomization feature making DFU/SR/FD/BV-43-C test to fail.
This fixes DFU/SR/FD/BV-43-C test.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add a note to the access randomization feature that reordering can
happen and what should be done to avoid it.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
It is unclear from a cursory glance at the code what the caller of
`send_buf(buf)` should do with `buf` based on the returned error codes.
Document when ownership is and isn't transferred to `send_buf()`.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Verify the connection is active before popping the buffer from the TX
queue.
The current behavior enables a race condition between `create_frag` and
the connection being torn down, as `buf` can be popped from the TX queue
but not destroyed by `bt_conn_process_tx`.
In that case, `buf` will be leaked.
Original analysis and fix proposal by @watsug.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Reported-by: Adam Augustyn<watsug@gmail.com>
This commit implements simple rate-limiting for Neighbor Reachability
Hints in TCP module to prevent the potentially costly process of
frequent neighbor searches in the table, enhancing system performance.
Signed-off-by: Łukasz Duda <lukasz.duda@nordicsemi.no>
Gerard Marull-Paretas