This moves the assignment of driver_api to just before
the init function returns. This is in preparation to
make device_get_binding() return NULL if driver
initialization fails.
Change-Id: I69590c463b84877d250c63d4460b7e254b79c8b3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This moves the assignment of driver_api to just before
the init function returns. This is in preparation to
make device_get_binding() return NULL if driver
initialization fails.
Change-Id: Ibf08cb107885da7c1037c6e7d207530e1a4708f8
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This moves the assignment of driver_api to just before
the init function returns. This is in preparation to
make device_get_binding() return NULL if driver
initialization fails.
Change-Id: Ia0c7a0014eb28624cbf363f994d6149f1aa5aadd
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add read multiple attributes request and response. Update RPC version
to niko-0412.
Change-Id: I5dfd99a1b8af866b69eae230ad24304eafccab4d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
So far the assumption has been that the host stack manages all
incoming and outgoing buffers. For the incoming buffers (from the
controller) this has required hci_core.c to manage its own pools and
do the host flow control. This setup makes perfect sense for an
architecture where the controller resides remotely on a different CPU
& address space (i.e. the "traditional" HCI transport case).
When the stack runs on a system where the controller resides in the
same address space this setup doesn't work that well. In such a
scenario the incoming buffers are ideally created as low down in the
stack as possible (i.e. below HCI), which means that the current
hci_core.c cannot be responsible for managing their pools.
To allow for both types of architectures this patch introduces a new
BLUETOOTH_HOST_BUFFERS Kconfig option that can be selected to say that
host-side management is desired, or deselected to say that the
controller (residing in the same address space) takes care of managing
the incoming buffers.
So far the incoming buffer types were identified by hci_core.c by
looking at their "free pool" pointers, however as soon as the pools
are allowed to be somewhere else this doesn't work. To solve this we
now require a minimum user data size for all Bluetooth buffers and use
that to store the buffer type.
Change-Id: I14bc32007e3e3f17c654f71f79b520650028d7ce
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The D2000 CRB is similar to the Arduino 101 (at least as GPIO is
concerned). Add support for using the GPIO controller without QMSI
libraries.
Change-Id: I001da05c9a9d5771b2ec678a9d4a91c44db05289
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Without this conn.c will cause logs whenever BLUETOOTH_DEBUG is
enabled.
Change-Id: I03f7d6b5b37e05ca23cba20536b24dbdb850304d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The previous enable/disable API implementations weren't actually what
their names implied, but simply gave the right result for the
initialization scenario when called after each other. Split these into
proper init/enable/disable APIs which do the exact thing that the
names imply.
Change-Id: I09a930d3607f4919ecd889ec3ee4ba8d7b12ee36
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is a complete new cc2520 driver for zephyr. Intention is to fit
better within Zephyr device driver model.
- It's (almost*) ready to be instanciated as many times as necessary
- It's fully interrupt based on SFD and FIFOP (no pin polling)
- It's nicer to other sub-systems (it sleeps, no busy-wait loop)
- It still loosely complies to old legacy radio device driver model
*: GPIO API needs to be fixed in order to accept multiple callbacks, as
well as enabling callbacks to retrieve private data.
Notes:
- Hardware filtering does not work yet as the net stack, above, needs to
provide the relevant information for it (src/dst ieee802154 extended
addresses, short addresses...)
- A embryo of generic functions (txpower, channel, addresses...)
have been implemented but don't belong yet to any radio device driver
model. Such new driver model will come afterwards (soon?)
- SPI API would need to be improved to avoid as much as possible memcpy
as well as spi_slave_select() call.
Change-Id: I1fd6dfff28fba3984f6006d394ea12f1e763ac18
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ieee802154 is a more relevant name. Applying the change in
include/drivers as well.
Change-Id: I7f7188ed0421045d7667303c375eeb8af1298b97
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
SENSOR_ATTR_FULL_SCALE attribute now expects the value as radians per
second.
Change-Id: I8082a1f112f1ed8efb511de39e3a8e5ae3d3ed0c
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Clarify the name of the option and add a dependency to Arduino 101
which is the only known board that is currently known to need it.
Change-Id: Ibfb96cba202f34464b45b922da599da70c038d12
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix coding style so line length does not exceed 80 chars.
Change-Id: Iddebdf55593736cfa288a03a750cc927665f9065
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Remove those kconfig options that are SoC specific, and
should not be configurable via kconfig.
Change-Id: Ib483419be5199b52cf281b4b106cd8a3be95b7be
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The configuration option CONFIG_RTC_IRQ_PRI does not longer exist, and have
to use the specific QMSI driver IRQ priority
Change-Id: I8074c6d8e095596d03e51a94f26a73c3a9ff91b7
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
This function is needed to get next attribute of passed to function
attribute.
Change-Id: Iefe2015f2d6bcb650012b1f9d5b1ea98e8fa8f48
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
When Nordic BLE chip is flashed with HCI firmware use H:4 UART driver
and enable chip the same way we enable for NBLE.
Change-Id: Ie14734266803088feadb0d0eb20c49c3615f0267
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The nble nRF51 firmware cannot handle situations where it receives
data before it is ready. The RPC calls otoh cannot be blocking.
Combine this with the fact that bt_enable(NULL) is supposed to be
blocking means we cannot support this mode of operation with nble.
Change-Id: Ib9c2c322b44b04bc48be243c2ba1c1bc4becb8ea
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Refactoring Power Management related code to special file nrf51_pm
making it possible to reuse the functions for H:4 UART driver when
Nordic BLE is flashed with HCI firmware.
Change-Id: If389c1f4af13fa786e5866129624527cec0928e0
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The config option handles enabling, disabling and power management
operations with Nordic nRF51 BLE chip.
Change-Id: I816062a7fb17c9e57c234113a2cecdebceb407b6
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move NBLE code to the place where other Bluetooth drivers code resides.
Change-Id: Ibcf9ffb016e9b842bed66a61dff5c101b1573aaa
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Keep a single bt_storage_* name space for current and future storage
APIs.
Change-Id: If158eb7408cce7c06cd8f98d78a061b9f9585265
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update RPC headers and change compatible_firmware version 0404.
Change-Id: Ie9920d302f3787c07181bc6aa519a96556463a79
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move NBLE pin handling to the driver from gap.c.
Change-Id: I4b7fd408c623971d19da12784c656c5c605852a5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Implement bt_gatt_attr_read_cpf() for NBLE.
Change-Id: Ia99db05a3f67bef3c1617df37fd371a8b1e8beb6
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add initial skeleton for the persistent storage API.
Change-Id: I7a6cc283aa88e7d861af18a6f0db2ed8c71e44a0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove those kconfig options that are SoC specific, and
should not be configurable via kconfig.
Change-Id: Ib7e0b81b2df1a0225fc244fea3035416d0a4f282
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The SPI API states:
"max_sys_freq is the maximum frequency supported by the slave it
will deal with"
However, currently, for DW the max_sys_freq is a divider which confuses
the user.
This patch adds a small hack to allow users to use both dividers and
frequencies when configuring the bus. The only trade-off is one has to
use dividers for bus frequencies smaller than 65536Hz. However, since
most devices nowadays can run at clock frequencies more than 100kHz,
this is a good compromise.
Change-Id: I44386cc8ad501b08eeaf71bc7588661ff36e108b
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
The commands array is not expected to change and can be declared
const. This allows callers to cleanly declare their commands lists as
const, effectively moving the structures from SRAM to code section.
Change-Id: Ie1710622b8cfa609e129eb79712f910f1d1aace3
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
The comments in the sensor header specify that pressure should be
expressed in kPa, but the bmp280 driver returns a value in Pa.
Change-Id: I6d5346db250d1a01a1e5e31fb1d8685ab5dc405b
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Fixes this built error:
zephyr/drivers/pinmux/dev/pinmux_dev_quark_mcu.c:138:18:
error: 'PINMUX_BASE_ADDR' undeclared here (not in a function)
.base_address = PINMUX_BASE_ADDR,
Change-Id: I54f15bc262cb887117f7b56660bcf85983daa877
Signed-off-by: liu.lei <lei.a.liu@intel.com>
Implement bt_gatt_attr_read_cud() making working peripheral_esp app.
Change-Id: Ic9634bf31a39ae9cd55279de34ee4c0c0995a4dd
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
When an ethernet frame is larger than UIP_BUFSIZE,
a net_buf is allocated but never released. Therefore
after few bad frames, no more RX network packet
can be received.
Fixed by allocating the net_buf after checking
the frame length.
Change-Id: I436487e3c26d739de347b4db6facc3a3dbebbe75
Signed-off-by: Sebastien Griffoul <sebastien.griffoul@intel.com>
Remove those kconfig options that are SoC specific, and
should not be configurable via kconfig.
This also separates IRQ_PRI into one for DW and one
for QMSI, to follow the convention of every other
drivers.
Change-Id: I338f819f71c18fa9e17015e8a588a3d0207350c6
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove those kconfig options that are SoC specific, and
should not be configurable via kconfig.
Change-Id: Ic73783189db57059d2b7f3727e4802e1b2e27931
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove those kconfig options that are SoC specific, and
should not be configurable via kconfig.
Change-Id: Ifd65097a65f80539cac073f95aadc2d8e42efb9f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove those kconfig options that are SoC specific, and
should not be configurable via kconfig.
Change-Id: Ifdbb5e3a997795ef577350d88f8cb06877eb6463
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove those kconfig options that are SoC specific, and
should not be configurable via kconfig.
Change-Id: Ib8158f00a6c6616360ddbcf63981f1a85911c1b9
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This patch extends the i2c shim driver so it supports the 'default
configuration' infrastructure which enables the user to specify a
default configuration for the I2C device. The default configuration
is set during driver initialization.
This patch also changes Quark SE and D2000 Kconfig.defconfig files so
the i2c default configuration is set to '0x12' which means standard
bus speed, 7-bit addressing and master mode. This is the same value
used when DW driver is selected, by the way.
Change-Id: I06e0dc3c29e8da2f3317db5bef285177f2e92c9a
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Remove those kconfig options that are SoC specific, and should not be
configurable via kconfig.
Change-Id: Ia62888838877da4627419bd36c261d5254761acd
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Each option within Kconfig.qmsi already set its dependency so this
patch removes the 'if I2C_QMSI' block since it is redundant.
Change-Id: Ic221b96766ecac685491cb31525caf28e641ee45
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Daniel Leung