The sample from samples/drivers/misc/ft800/ causes twister to
timeout as it has no pass conditions defiend nor producess any
output that can be verified. What is more, it requires a shield
which is not reflected in the sample.yaml. This fix sets test harness
to display and adds an entry for the required fixture.
Fixes: #38536
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Twister was failing for samples/drivers/audio/dmic with timeout
because there were no pass conditions defined. This patch sets
harness to console and adds regex entries to be checked.
Fixes: #38532
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Since commit 718c77a4cd ("dts: arm: stm32f0 soc serie has dma of type
V2bis"), the DMA DT cell of STM32F0 MCU has been fixed. It now has three
elements instead of five previously.
This patch fixes the dma property used in nucleo_f070rb.overlay
accordingly.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
This adds shell support for FPGA drivers.
Signed-off-by: Mateusz Sierszulski <msierszulski@internships.antmicro.com>
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This adds driver for EOS_S3 SoC FPGA.
Signed-off-by: Mateusz Sierszulski <msierszulski@internships.antmicro.com>
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The HiFive Unleashed and HiFive Unmatched boards do not enable the
SPI0 controller that the flash is connected to. This test will not
build on these platforms because SPI0 bus controller is missing.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This patch fixes printf format specifier "%u" -> "%zu" for printing
an argument of size_t on 64bit environment.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Add a very simple application intended to show how to use the Audio
DMIC API and also to be an aid in developing drivers to implement
this API.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Enable support for Atmel SAM DAC driver on the following boards:
- sam_e70_xplained
- sam_e70b_xplained
- sam_v71_xult
- sam_v71b_xult
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
I can't find any reference anywhere showing that the manufacturer of
the LPD8803 or LPD8806 LED scripts is a company called 'colorway'.
Use 'greeled' instead; these seem to actually be manufactured by
GreeLed corporation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The verb tense for the suspended state was not consistent with other
states. The likely reason: state was being used as a command/action.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The difference between low power and suspend states is a thin blur line
that is is not clear and most drivers have used indistinctly. This patch
converges to the usage of the suspend state for low power, since
contrary to the low power state, it is used by both system and runtime
device PM. The low power state is still kept, but its future is unclear
and needs some discussion.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
There is no need to include nrf_clock_control.h so remove it as
this fixes a build issue when trying to compile this sample on
litex_vexriscv.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add Atmel sam0 sercom[uart] pinctrl bindings and implements pinctrl at
driver level. It changes all sam0 boards to use new feature and remove
pinmux driver dependency for sercom[uart]. The samples that require a
binding were update to keep consistency and avoid errors.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add a sample intended to show how to use I2S drivers in processing of
audio streams. The sample starts both the RX and TX streams and adds
a simple echo effect to the received audio signal.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add support for sam_e70_xplained, sam_v71_xult based on TC0 counter.
Note: TC module is a 16-bit counter. Even with slow, 32768 Hz input
clock the time span counted by the driver is short.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The test sample.drivers.crypto.stm32 was built only for the stm32 crypto
driver (build_only: true).
This commit changes the configuration to run the test and adds regex for
the supported modes.
Additionally integration_platform native_posix is removed from the
crypto.stm32 test configuration, such that stm32 targets built in CI.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit uses filter instead of allow list for the
sample.drivers.crypto.stm32 test case.
As a result the ci test is not only built on mikroe_mini_m4_for_stm32,
but also on lora_e5_dev_board, nucleo_wl55jc and stm32l562e_dk.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
reuse the lpc's lpadc driver for rt1170, modify the dts and add
some macro to shield some code of LPC series. Also add the
board support inside the tests/drivers/adc/adc_api/src/test_adc.c,
and a dts node:zephyr,user inside
samples/drivers/adc/boards/mimxrt1170_evk_cm7.overlay
Signed-off-by: Crist Xu <crist.xu@nxp.com>
This patch adds a devicetree configuration example for the Everlight
B1414 LED controller.
An overlay for the nucleo_f070rb board is provided. It assumes that
a B1414 LED controller is connected to the PA7 pin (SPI 1 MOSI). The
WS2812 SPI driver is used.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Some devices compatibles with the WS2812 IC have a different channel to
color mappings (e.g. RGB, BGR, RGBW, etc).
This patch introduces the "color-mapping" required property for the
WS2812 DT binding and adds support to the ws2812_gpio and ws2812_spi
drivers. This new property allows to configure the color to channel
mapping of a WS2812 compatible LED strip controller from its DT node.
Since this property also allows to know if a white channel is available,
then this patch removes the "has-white-channel" property.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Add nucleo_wl55jc to platform_allow for lora send/receive and class_a
samples. The board has a variation of the sx1262 driver, this should
allow to build test that code path.
Fix the existing config as well to specify the platforms on a single
line, as currently only the last entry is considered.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
By default the hifive1 board doesn't enable the SPI controller that
the flash is on. As such this test will not build on that platform
due to lack of a missing SPI bus controller device.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The callback is not used anymore, so just delete it from the pm_control
callback signature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit updates the NS board variant from
`nrf9160dk_nrf9160ns` to `nrf9160dk_nrf9160_ns`
to maintain consistency across zephyr.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
This commit configures ADC sample application using overlay. The ADC
sample has been tested in nucleo_l552ze_q platform.
Signed-off-by: Sidhdharth Yadav <sidhdharth.yadav@hcl.com>
This commit configures ADC sample application using overlay. The ADC
sample has been tested in stm32l562e_dk platform.
Signed-off-by: Sidhdharth Yadav <sidhdharth.yadav@hcl.com>
Anas Nashif