We rename the nRF53 Dev Kit board target (nrf5340_dk_nrf5340)
to nrf5340pdk_nrf5340. We update all associated references
in the supportive documentation and all nRF5340-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove prompts from Kconfig options `UART_x_NRF_UART*` that select
the type of nrfx driver (for UART or UARTE peripheral) to be used
for a given instance. This prevents the options from being modified
from configuration files.
Instead, make one of these options selected by default according to the
"compatible" property set for the corresponding UART node in devicetree.
This eliminates the need of changing both the "compatible" property in
devicetree and the Kconfig option selecting the driver type when a user
wants to switch between UART and UARTE for a given instance.
Since all `UART_x_NRF_UART*` options are made "hidden" by this commit,
all their occurrences in configuration files are removed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
We rename the nRF91 Dev Kit board target for the NRF52840
controller (nrf52840_pca10090) to nrf9160dk_nrf52840. We
update all associated references in the supportive
documentation and all nRF9160-related cofigurations and
overlay files in the samples and tests in the tree. We
also remove an un-referenced board image file that had
erroneously been part of the documentation of this platform.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
We rename the nRF51 Dev Kit board target (nrf51_pca10028)
to nrf51dk_nrf51422. We update all associated references
in the supportive documentation and all nRF51-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove data length and phy update set to 'n' on board that does not
support these features anyway. BT_CTLR_DATA_LEN_SUPPORTED and
BT_CTLR_PHY_UPDATE_SUPPORTED are both set to 'n'.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove BT_CTLR_DTM_HCI=y config which is not supported for this board.
This produced the following warning:
warning: BT_CTLR_DTM_HCI was assigned the value
'y' but got the value 'n'. Check these unsatisfied dependencies:
BT_CTLR_DTM_HCI_SUPPORT (=n).
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor conf files to use prj.conf + board/<board>.conf configuration.
This allows us to have put common configurations into the prj.conf and
have board specific configs in each board file.
This also respects adding additional prj.conf files such as
-DCONF_FILE='nrf5.conf debug.conf' to add debug configuration.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update main stack size for nrf5 boards. This is to support an
alternative hci_driver that has a higher stack size usage in hci driver
open. Measured stack usage in this case to 808/1024.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
VEGABoard BLE controller implementation supports HCI over UART;
as such enable this configuration when building the hci_uart
sample.
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This define is not of use anymore since there's a global net_buf user
data Kconfig variable and its definition already guarantees a
sufficient minimum for Bluetooth.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add the required specific HW configuration for SW defined
BLE LL on RV32M1 SoC, by means of DTS overlays:
- enable INTMUX0 channels 2 & 3
- route Generic FSK RF0 interrupt to INTMUX channel 3
- route LPTMR1 interrupt to INTMUX channel 2
This change is done for all Bluetooth samples that are intended to
run on RV32M1 using BLE SW LL.
Signed-off-by: George Stefan <george.stefan@nxp.com>
Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
Signed-off-by: Ionut Ursescu <ionut.ursescu@nxp.com>
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Reduce the RAM usage in two of the Bluetooth samples in order for them
to fit in the BBC Microbit's RAM.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move uart.h to drivers/uart.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Assert if the UART device is NULL to help with debugging whenever
there's an issue locating the correct UART instance.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use Device Tree,and in particular a new 'bt-c2h-uart' to select which
UART is being used to communicate with an external BLE Host when acting
as a Controller.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The DT spec. only has "okay" and not "ok". The Linux kernel has around
12k "okay"s and 300 "ok"s.
The scripts/dts scripts only check for "disabled", so should be safe re.
those at least.
The replacement was done with
git ls-files | xargs sed -i 's/status\s*=\s*"ok"/status = "okay"/'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Enable the GPIO reset pin feature of nrf52840_pca10090
on pin P1.02 and the wait NOP feature of the controller.
These are used to let nrf9160_pca10090 synchronize the
HCI communication with nrf52840_pca10090 controllers.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
In order to fit in SRAM, reduce the CONFIG_BT_MAX_CONN from 20 to 16 in
the configuration used for the BBC micro:bit.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Implement the Controller counterpart to CONFIG_BT_WAIT_NOP so that it
issues a NOP Command Complete event after booting up, to signal to the
Host that it is ready to receive HCI traffic.
Fixes#15333
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Overhaul the Bluetooth documentation to split it into manageable units
and include additional information, such as architecture and tooling.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
A new role :zephyr_file: is available that renders to a link to the file
or folder in GitHub. Find appropriate references using :file: and
convert to :zephyr_file: to take advantage of its linking capability.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Add a project configuration for nrf52840_pca10090 that will
route the nRF9160 interface pins to the nRF52840, and use them
for HCI over UART.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The BBC micro:bit uses a baudrate of 115200 for the hci_uart
sample. Add a note about this to avoid any confusion.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Now that log processing happens in a separate thread, the
BT_STACK_EXTRA macro is not needed (since there's no significant
overhead), and therefore the BT_STACK macros become unnecessary as
well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix bluetooth config dependencies where the definitions depend on other
definitions.
BT_RX_PRIO is not always defined in a controller only build.
BT_CTLR_TX_BUFFER_SIZE does not depend on BT_CTLR, but BT_LL_SW.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The UART_NRFX_FLOW_CONTROL Kconfig symbol was renamed to
UART_0_NRF_FLOW_CONTROL in commit 3f99eefe5a ("drivers: uart: Rename
nrf5 namings to nrfx").
The assignments in samples/bluetooth/hci_uart/microbit.conf and
samples/bluetooth/hci_uart/nrf5.conf were updated in the same commit,
but to the wrong name. Change them to use the correct name.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
UART driver renamed to keep the same convention as SPI and TWI drivers.
All substrings: "UART_NRF5" in defines renamed to "UART_NRFX_UART".
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This symbol was removed in commit 748f724d82 ("serial: dts: remove
!HAS_DTS related Kconfig"). The setting should come from DTS now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The UART_NRF5_BAUD_RATE Kconfig symbol was removed in commit
748f724d82 ("serial: dts: remove !HAS_DTS related Kconfig"). Looks
like this has been moved to DTS.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Cover the required steps to use the Controller with Linux's BlueZ and
QEMU, and link to the relevant sections in the subsystem developer
guide.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Ioannis Glaropoulos