1. optimized the logic for buffer usage in async api
2. skip timeout flush when the remaining counts is 0,
as this will trigger dma_callback to process.
3. remove scatter mode, as we are not using this mode
4. trigger after dma_reload.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Modifies the CS bitfields that are used for accessing HCI
event data to take platform endiannes into consideration.
Signed-off-by: Burak Gorduk <burak.gorduk@nordicsemi.no>
Adds HCI support for LE CS subevent result continue
event and the reassembly logic for the partial results.
When subevent results are completed or the subevent is
aborted, the user callback is invoked with a buffer
pointing to the HCI event buffer, so no copy is done.
When subevent results are incomplete, then a reassembly
buffer is allocated from a fixed sized pool. This buffer
is used for the reassembling of the subevent result
containing all of the step data, which is then passed
to the user via the callback. kconfigs have been added
to set the size and the count of the reassembly buffer.
Signed-off-by: Burak Gorduk <burak.gorduk@nordicsemi.no>
Following the footstep of GCC/Clang cmake code to remove
TOOLCHAIN_LIBS, xcc also has it removed and utilizes
something similar to c_library to link the HAL library.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Shuffling of ld/lld on C library linking cmake code causes
issue with XCC as the HAL library is not being included in
linking. So make XCC to use xt-ld linker cmake code such
that the HAL library is included.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Removing the routine z_ready_thread_locked() as it is not
used anywhere. It was a leftover artefact from development
that previously escaped cleanup.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
As per board porting guidelines, the board image should be named after
the board.
This commit implements the changes for boards found to be non-compliant.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add ethernet phy header to ethernet group
Add ethernet.h to ethernet group
Add net/mdio.h to mdio group
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Don't attempt to take a mutex if operating from inside an ISR. The only
expected use-case where this should occur is when attempting to reboot
via `tfm_platform_system_reset` from an exception handler.
Fixes#79687.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Request calibration on ADC samples to improve the accuracy of the ADC
outputs and therefore the final measured current.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Instead of relying on INCBIN macros which do not properly add
dependencies, e.g., modifying FW file doesn't trigger rebuild.
Use the Zephyr cmake tooling to load the FW patch file as a header.
This also improves memory report where the patch target is clearly
visible instead of a hidden section.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This reverts commit e2e96acebf.
This will be properly fixes by adding a target for nRF70.bin and
removing INCBIN approach.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Replace wrong compatibility strings for max14906 and max14916.
Fix wrong addressees for max14906 and max14916.
Signed-off-by: Stoyan Bogdanov <sbogdanov@baylibre.com>
Insert Feature Units in between:
* USB Streaming Input Terminal and Headphones Output Terminal
* Microphone Input Terminal and USB Streaming Output Terminal
The Feature Units have Mute control only on the Primary channel 0.
The headphones Feature Unit also has Automatic Gain control on all
channels while microphone Feature Unit has Automatic Gain control only
on the Logichal channel 1.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Rework NUM_SPATIAL_LOCATIONS() to evaluate to integer literal to allow
using it with LISTIFY() macro. This is necessary because Feature Unit do
not operate on channel clusters but rather on logical channels.
Track back Output Terminal channel cluster to appropriate entity. This
is necessary because Feature Unit does not repeat the channel cluster
information.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add initial Feature Unit bindings allowing user to place the Feature
Unit inside UAC2 instance description. Currently the bindings facilitate
only specifying which controls are available on the Primary channel 0
and on each Logical channel. The number of Logical channels has to be
derived from data-source property.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Ensure Jinja templates don't have extra blank lines in the output by
using the {% -%} syntax to suppress them.
This is not incredibly important but this helps keeps the HTML output
more readable.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add proper labels to the form fields for better UX/accessibility
Updated the placeholder for the "board name" field to be more
informative.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fix definition for ROM status register for ACE1.5. The value should be
same as ACE2.0 and only different for ACE3.0.
Fixes: 6ad9b6ccab ("soc: intel_adsp: tools: add intel_adsp_ace30
support to cavstool.py")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Update the HW models module to:
eeed2591d38e5e9bf89658df67555f2777249fc0
eeed259 RADIO: Do not warn about TASK_RSSISTART during RXIDLE
565220e 54L15.mk: Fix flipper hal target name
bb8c6fd Makefile: Let's install libraries by default
6dbb843 RADIO: Implement immediate RSSI measurement when needed
3a5d567 RADIO: Allow triggering TASK_RSSISTART from register writes
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Currently, Zephyr is always sending back notifications to
AP (e.g Linux in our case) on channel 0.
But this currently doesn't work if Linux uses other channel
id for communication. So, add option to use predefined
vring ID that can accomodate Linux used ID.
Signed-off-by: Alexandru Lastur <alexandru.lastur@nxp.com>
MbedTLS specifically checks for null-terminator, else it skips PEM
format processing and tries to parse it as DER causing parsing failures.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Enterprise security doesn't have either SAE or PSK, so, using a blanker
else throws a false warning. Fix the checks to proper handler enterprise
mode.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This overlay has all necessary configuration needed for Enterprise mode.
Two variants are given, once with fixed size network buffers and other
with variable size network buffers (still experimental).
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
EAP-FAST has extra requirements (TLS 1.3, session tickets etc) and is
seldom used, so, remove it from Enterprise list and add a separate
Kconfig option.
This solves the build error when Enterprise mode is enabled.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
- Fixes bug where the sample would only look at the first name type
and skip the rest.
Signed-off-by: Alexander Svensen <alexander.svensen@nordicsemi.no>
This commit deprecates passing of async signal in functions such as move
and set_target_position. As per the new API, the async signal has to be
set via set_async_signal.
If RAMPSTAT_POLL is activated then enable_constant_velocity_mode would be
able to raise signals like END_STOP_DETECTED & SENSORLESS_STALL_DETECTED.
This commit also adjusts shell script in order to test these signals.
Signed-off-by: Jilay Pandya <jilay.pandya@zeiss.com>
Gaofeng Zhang