Found out that the SAM3 series is not a single series. There are actully
3 different series, 3U, 3A, and 3X.
Origin: Original
Jira: ZEP-2067
Change-Id: I61cdc826cc32dbdd25b5e6bafaada062c8ae8417
Signed-off-by: Justin Watson <jwatson5@gmail.com>
Historically, space for struct k_thread was always carved out of the
thread's stack region. However, we want more control on where this data
will reside; in memory protection scenarios the stack may only be used
for actual stack data and nothing else.
On some platforms (particularly ARM), including kernel_arch_data.h from
the toplevel kernel.h exposes intractable circular dependency issues.
We create a new per-arch header "kernel_arch_thread.h" with very limited
scope; it only defines the three data structures necessary to instantiate
the arch-specific bits of a struct k_thread.
Change-Id: I3a55b4ed4270512e58cf671f327bb033ad7f4a4f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Moved the Atmel SAM 3 from its own directory into
the directory tree laid out in arch/arm/soc/atmel_sam.
Origin: Original
Jira: ZEP-2067
Change-Id: I26a1a521dd7caa607c3e95a06cd574ee68ca59b8
Signed-off-by: Justin Watson <jwatson5@gmail.com>
This SoC, in its default configuration, does not have any SW IRQ below
the EXCM level. This make it unsuitable to use irq_offload() and thus
almost untestable.
Decision was made to remove this configuration in favorof custom one
XRC_D2PM_5swIrq, which is the same core but with additional 4 SW IRQs
of level 1 and an additional timer.
Issue: ZEP-2029
Change-Id: Iee4f8346aa9d610e14898444f78d28ef0ac4cef2
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This patch adds initial MPU support to STM32F401XE.
The boot configuration prevents the following security issues:
* Prevent to read at an address that is reserved in the memory map.
* Prevent to write into the boot Flash/ROM.
* Prevent the application to access to the BootROM.
* Prevent from running code located in SRAM.
Change-Id: I4dc0669009bd5c0a829a69f8ff417c787b7043ed
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch adds initial MPU support to ARM Beetle.
The boot configuration prevents the following security issues:
* Prevent to read at an address that is reserved in the memory map.
* Prevent to write into the boot Flash/ROM.
* Prevent from running code located in SRAM.
Change-Id: I64f1001369896fffb0647de6be605a95161c4695
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch adds an initial driver for the ARM MPU.
This driver has been tested on ARM Beetle and STM32F4.
Change-Id: I2bc4031961ec5a1d569929249237646f4a349f16
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch add the Memory Protection Unit parameter to the arm core
configuration.
Change-Id: Ifee8cdd5738391a6f182e8d0382d27eeb8c546ba
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Marc Moreno <marc.morenoberengue@linaro.org>
This patch adds the regions for the mpu configuration to the soc.h file.
Change-Id: Ifd1ce96eeb4731ae01f5171924af92b9e236a3dc
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Marc Moreno <marc.morenoberengue@linaro.org>
When calling scripts/gen_idt, if we don't have $ZEPHYR_BASE/scripts in
the path, it will fail, so we can call it with its full path to avoid
such need.
Change-Id: I47b340c9f3204ad8740c29e663e12082208bb13b
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Document the flash latency values by copying the relevant tables
from the reference manuals for each MCU.
Change-Id: Ieb2824ffd7634d917399e3e62146d9243b527f44
Signed-off-by: Christer Weinigel <christer@weinigel.se>
Fix misspellings in Kconfig help text and made spelling of
RX and TX consistent (from reviewer comments)
Change-Id: Ie9d4c3863cd210e7a17b50a85a7e64156b6bf3d7
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
If the flash latency isn't set most STM32F4xx MCU's won't be able
to run from flash when the CPU frequency is changed. Make this a
compile time error instead of an assert at runtime.
Change-Id: Ic3421194545f8f83bd6e00f0cd011306c8d1eedd
Signed-off-by: Christer Weinigel <christer@weinigel.se>
Put the reason code in r0 and make a SVC #2 call, which will be
propagated to _fatal_error_handler as an exception.
The _is_in_isr() implementation had to be tweaked a bit. User-generated
SVC exception no longer just used for irq_offload(); just because we are
in it does not mean we are in interrupt context. Instead, have the
irq_offload code set and clear the offload_routine global; it will be
non-NULL only if it's in use. Upcoming changes to support memory
protection (which will require system calls) will need this too.
We free up some small amount of ROM deleting _default_esf struct as it's
no longer needed.
Issue: ZEP-843
Change-Id: Ie82bd708575934cffe41e64f5c128c8704ca4e48
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We reserve a specific vector in the IDT to trigger when we want to
enter a fatal exception state from software.
Disabled for drivers/build_all tests as we were up to the ROM limit
on Quark D2000.
Issue: ZEP-843
Change-Id: I4de7f025fba0691d07bcc3b3f0925973834496a0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Unlike assertions, these APIs are active at all times. The kernel will
treat these errors in the same way as fatal CPU exceptions. Ultimately,
the policy of what to do with these errors is implemented in
_SysFatalErrorHandler.
If the archtecture supports it, a real CPU exception can be triggered
which will provide a complete register dump and PC value when the
problem occurs. This will provide more helpful information than a fake
exception stack frame (_default_esf) passed to the arch-specific exception
handling code.
Issue: ZEP-843
Change-Id: I8f136905c05bb84772e1c5ed53b8e920d24eb6fd
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The ICSR RETTOBASE bit is improperly implemented in QEMU (the polarity
is flipped) and the fix for it has not yet made it into a QEMU release,
although it is present in upstream master branch.
The symptom is that if we are not in thread mode, the system always
believes were are in a nested exception state, causing _IsInIsr() to
always return true.
Skip the nested exception check if we are building for QEMU.
This is a workaround until SDK-54 is resolved.
Issue: SDK-54
Change-Id: I06eafcc85fb76a9b23b4ba85ed6e111a08516231
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For exceptions where we are just going to abort the current thread, we
need to exit handler mode properly so that PendSV can run and perform a
context switch. For ARM architecture this means that the fatal error
handling code path can indeed return if we were 1) in handler mode and
2) only wish to abort the current thread.
Fixes a very long-standing bug where a thread that generates an
exception, and should only abort the thread, instead takes down the
entire system.
Issue: ZEP-2052
Change-Id: Ib356a34a6fda2e0f8aff39c4b3270efceb81e54d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We do the same thing on all arch's right now for thread_monitor_init so
lets put it in a common place. This also should fix an issue on xtensa
when thread monitor can be enabled (reference to _nanokernel.threads).
Change-Id: If2f26c1578aa1f18565a530de4880ae7bd5a0da2
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We do a bit of the same stuff on all the arch's to setup a new thread.
So lets put that code in a common place so we unify it for everyone and
reduce some duplicated code.
Change-Id: Ic04121bfd6846aece16aa7ffd4382bdcdb6136e3
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There are a few places that we used an naked unsigned type, lets be
explicit and make it 'unsigned int'.
Change-Id: I33fcbdec4a6a1c0b1a2defb9a5844d282d02d80e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types. This handles the remaining includes and kernel, plus
touching up various points that we skipped because of include
dependancies. We also convert the PRI printf formatters in the arch
code over to normal formatters.
Jira: ZEP-2051
Change-Id: Iecbb12601a3ee4ea936fd7ddea37788a645b08b0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types. There are few places we dont convert over to the new
types because of compatiability with ext/HALs or for ease of transition
at this point. Fixup a few of the PRI formatters so we build with newlib.
Jira: ZEP-2051
Change-Id: I7d2d3697cad04f20aaa8f6e77228f502cd9c8286
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit should fix the concern about uninitialized memory of main
thread that was raised in https://gerrit.zephyrproject.org/r/#/c/12920/
The issue is more general, if it happens that the content of the
CPENABLE flag of any thread is set then any other thread using the CP
may cause a memory corruption.
I'd prefer to avoid the issue by initializing the CP descriptor to 0.
The descriptor itself is few words. We set them to 0 up to CP_ASA, which
is set to a real value.
As the dummy thread instantiated at the kernel startup does not use CP,
there is no CP area in its thread memory buffer. However it is mandatory
that it have the CP descriptor and that cpEnable in that descripot is
set to null. This is ensured by adding XT_CP_DESCR_SIZE to
_K_THREAD_NO_FLOAT_SIZEOF.
Change-Id: I6a36b5b363600ea1e6d98ab679981182b2b5a236
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
Move linker/common-rom.ld between .rodata sections so that it's together
with other immutable data.
Move linker/common-ram.ld before the .bss section, so that .bss does not
appear between data sections, which had two consequences:
- there's a .bss-sized gap in the ELF image, and
- PHDR segment that covers .bss overlaps the segment that covers .data,
resulting in the following xt-run warning:
( [ sample_controller ] load_bfd ) *WARNING* Executable segment
[ 60004d60, 600079a7 ] overlaps an existing executable segment
Change-Id: I2db46f4656e240016fe60883057cc000b6377180
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Fix doxygen comment typos used to generate API docs
Change-Id: I94df2e3a2bda248824ed2aeff3dd0eb743f0bf3e
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This reverts commit da8bff6b20.
We revert this as we intent to move away from {u}int{8,16,32,64}_t types
to our own internal types for sized variables so we shouldn't need the
PRI macros anymore.
Change-Id: Ibb1fae7500bddb4772b8830d497a0e5f78b44bcc
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To allow for various libc implementations (like newlib) in which the way
various {u}int{8,16,32}_t types are defined vary between both libc
implementations and across architectures we need to utilize the PRI
defines.
Change-Id: Ic4e65db52c8d693228cf80584283d4d06e68b5ad
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add soc_gpio_get(), soc_gpio_debounce_length_set() functions to Atmel
SAM soc_gpio driver.
Change-Id: I541c6fead9a308dd2e67c59dabe67b87cf1628ef
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Added serial (UART) driver for Atmel SAM MCU family.
Note:
- Error handling is not implemented
- The driver works only in polling mode, interrupt mode is
not implemented.
Tested on Atmel SMART SAM E70 Xplained board
Origin: Original
Jira: ZEP-1959
Change-Id: I3e770fd1feb2ddf92cf405a9aa17be92eb32e19b
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Added I2C bus (TWIHS) driver for Atmel SAM MCU family. Only
I2C Master Mode with 7 bit addressing is currently supported.
Tested on Atmel SMART SAM E70 Xplained board
Origin: Original
Jira: ZEP-1866
Change-Id: Ic5aa7b6b21295feccae883d580b38bbeaf2ce291
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Add plumbing to build system and SoC level dtsi for the NRF52832 SoC.
We additionally add the necessary yaml files for the UART on the NRF52
SoCs.
Change-Id: I3b4a821b2993827e33d8e84bdbbc759d1521f8bd
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introduce SoC specific config options similar to what exists on NRF51,
this is mostly to help distinguish between SRAM & Flash sizes on
different variants.
Also deleted some unnecessary setting of CONFIG_SOC_NRF528{32,40} in the
board defconfig files.
Change-Id: I3aaedf0c15423ae12636f87b8e6a39070cbb2c6f
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Adds initial support for the kw40z SoC. This SoC has all the same
peripherals as the kw41z but with less flash and ram, so the defconfig
and dts are nearly the same.
Jira: ZEP-1388
Change-Id: Ib804451e8c2c71c4ff7d342bf23f6567d1542a2d
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The KL2x support requires DTS so we can remove any !HAS_DTS references.
Also NUM_IRQS shouldn't have been in a !HAS_DTS ifdef block.
Change-Id: I12b0781b6eef100bfb0a94698d12fc519c759888
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since all STM32 SoCs are using device tree we can remove this last bit
of !HAS_DTS for getting flash/sram sizes from Kconfig.
Change-Id: I9e706b7aba7c0edcf9fca3ddc0ddc7d820980b47
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Converted over all STM32F3 based boards to use device tree and removed
associated bits that now come from the device tree for STM32F3.
Boards that are now using devicetree:
* Nucleo f334r8
* STM32373C Eval
Change-Id: I081a1d83f86e417a98b6864c745354b6b32953b7
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Converted over all STM32F1 based boards to use device tree and removed
associated bits that now come from the device tree for STM32F1. Also
renamed the STM32F10{3,7} SoC dtsi to try and make it clear that the 'X'
is a place holder. Fixedup the top level compatiables in the boards to
be the specific 'X' instead of the generic one.
Boards that are now using devicetree:
* Nucleo f103rb
* STM3210C Eval
* STM32 MINI A15
Change-Id: I29b3634ec7451f974687d55980414efa655e2e96
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Converted over all STM32F4 based boards to use device tree and removed
associated bits that now come from the device tree for STM32F4.
Boards that are now using devicetree:
* 96b_carbon
* nucleo f401re
* nucleo f411re
Change-Id: Ibe197ca0a3f5ad78d594485a578d986403cc824a
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since all the L4 SoCs are using DTS we can remove the various Kconfig
bits that we now get from DTS.
Change-Id: Icdec49b478ff285dc3347b09412964a721f75bbf
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In order to suppport the FRDM-KL25Z board,
it is necessary to make this soc available.
Change-Id: Id93a51dcc9ef58118e27db02c30f662eb73d5adb
Signed-off-by: Gustavo Denardin <gustavo.denardin@gmail.com>
I2C_SHARED_IRQ, I2C_0_IRQ_SHARED, I2C_0_IRQ_DIRECT Kconfig options
are DW driver specific. Its presence is confusing for a user of any
other I2C driver than DW. This patch renames these options to include
DW string and makes it visible only for DW I2C driver. This is a
similar implementation to that used by ETH DW Ethernet driver.
Change-Id: I795506f9b103c028a22317df9ad632dce5cd1343
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Instead of FLASH_LOAD_OFFSET being something specific to cortex-m, add
it generally to misc/Kconfig, along with a hidden config
HAS_LOAD_OFFSET which can be selected by the architectures as they add
support for the functionality.
Change-Id: I256ff8cf4e9b8493b26354c3b93fe1f7017d4887
Signed-off-by: David Brown <david.brown@linaro.org>
gcc only understands -mlongcalls form of this option, xcc understands
both. Use -mlongcalls for building with both xcc and gcc.
Change-Id: I93f65ccbc97429ae564f1986120b37ce205ee38c
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
fallrisk