This changes both k_mem_domain_add_partition() and
k_mem_domain_remove_partition() to return errors instead of
asserting when errors are encountered. This gives the application
chance to recover.
The arch_mem_domain_parition_add()/_remove() will be modified
later together with all the other arch_mem_domain_*() changes
since the architecture code for partition addition and removal
functions usually cannot be separately changed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Apply the modifications required by the newer library version.
These modifications came from the original file in the mbedTLS
repository.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Deprecate the xoroshiro128+ PRNG algorithm in favour of xoshiro128++.
xoshiro128++ is a drop-in replacement which is invisible from the user
perspective.
xoroshiro128+ is unsuitable because it is explicitly a floating-point
PRNG, not a general-purpose PRNG. This means that the lower 4 bits of
the output are actually linear, not random (from the designers,
https://prng.di.unimi.it/). This means 1/8th of the generated data is
not random.
Additionally, xoroshiro128+ is not a 32bit algorithm, it operates on
64bit numbers. For the vast majority of Zephyr devices, this makes the
PRNG slower than it needs to be. The replacement (xoshiro128++) is
32bit, with no loss in state space (still 128 bit).
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
When MBEDTLS_RSA_C is defined, mbedtls define its local version of
rand() function. Since we already have rand() in our minimal libc, we
can safely remove this.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
For z_early_boot_rand_get(), give a length less than uint32 to be input
value, ensure the API can work normally with error condition to improve
code coverage.
Signed-off-by: Jian Kang <jianx.kang@intel.com>
This platform has a tiny handful of remaining tests that fail. We
will track them as issues, but let's exclude them from integration
testing to allow full runs to complete. Often a hung device in one
test will break an entire twister run.
Tests with known (and tracked) failures:
samples/application_development/external_lib
samples/posix/eventfd
samples/userspace/hello_world_user
tests/kernel/fatal/message_capture
tests/net/socket/socketpair
tests/portability/cmsis_rtos_v2
These tests never fail in isolated testing, but are reliable timeouts
when run in sequence in a big twister run. It's possible that the bug
here may be in twister or the flash/serial scripts:
tests/crypto/tinycrypt
tests/subsys/logging/log_immediate
tests/subsys/logging/log_output
See: #32836
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Even though ARC QEMU has received advanced multiplication
instructions support recently the ARC QEMU in the latest
Zephyr SDK still misses them, so tinycrypt may execute
too long and reach timeout in case of execution on
slow host.
Disable tinycrypt for ARC QEMU platforms till we update
ARC QEMU in Zephyr SDK.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
The testcase allocates lots of stack space, many KiB, for RISC-V
64-bit in the mbedtls bignum functions.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
MEC1501 SoC has 256KB of SRAM, but it is split into 224/32KB
for code and data, as each partition is optimized for
the access pattern. There the DTS only specifies 32KB as
data ram. The tinycrypt_hmac_prng test requires 40KB for
ztest stack. This obviously won't fit so exclude the boards
based on MEC1501 from the test.
Fixes#27572
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In some platforms the size of size_t can be different of 4 bytes. Use
sys_rand_get to proper fill this variable.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Updated tests/crypto/rand32/ to include cryptographic test cases.
Added config file for rand32_ctr_drbg generator.
Signed-off-by: David Leach <david.leach@nxp.com>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The build scripts for the tests/crypto/rand32 test has been invoking
'zephyr_include_directories' in an invalid way. They have presumably
been trying to modify the 'app' library, but have in effect being
modifying the global environment, in an invalid way nonetheless.
This patch fixes the build script to modify the 'app' library only.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Some test cases have the same test case name.
To get rid of it, I decided to change test cases names
contained same names.
Please check my logic, how I give them names.
Usually trying to give name same as a directory folder.
There are still more test cases which necessary to change,
but I will make changes by small steps.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Move tinycrypt related header into test and make those tests only build
on native_posix. The tests are unit tests, ie. testing tinycrypt
functionality only without any dependency on the underlying system.
Long term we should move those to be true unit tests and create
functional and integration tests that use tinycrypt in the context of
Zephyr and for real use-cases.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move duplicate hex2bin and add bin2hex function so that application can
use the functions and avoid code duplication.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It exists only if MBEDTLS_PLATFORM_PRINTF_ALT is defined, whcih we
no longer do, but make the call condiitonal in case we'll need to
make it configurable later.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Use the improved HMAC_PRNG test from TinyCrypt version 0.2.8,
(commit 6e0eb53fc8403988f97345e94081b0453f47231d),
that was imported into Zephyr in
commit 06d0b6a694.
Rewrote part of the test code to use the ztest asserts and
test_utils.h functionality.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Unlike CONFIG_HW_STACK_PROTECTION, which greatly helps
expose stack overflows in test code, activating
userspace without putting threads in user mode is of
very limited value.
Now CONFIG_TEST_USERSPACE is off by default. Any test
which puts threads in user mode will need to set
CONFIG_TEST_USERSPACE.
This should greatly increase sanitycheck build times
as there is non-trivial build time overhead to
enabling this feature. This also allows some tests
which failed the build on RAM-constrained platforms
to compile properly.
tests/drivers/build_all is a special case; it doesn't
put threads in user mode, but we want to ensure all
the syscall handlers compile properly.
Fixes: #15103 (and probably others)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This lets us quickly filter tests that exercise userspace
when developing it.
Some tests had a whitelist with qemu_cortex_m3; change
this to mps2_an385, which is the QEMU target with an
MPU enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The mbedtls library has some globals which results in faults
when user mode tries to access them.
Instantiate a memory partition for mbedtls's globals.
The linker will place all globals found by building this
library into this partition.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We were reporting results twice, something that might confuse test
systems and end up reporting wrong results. Assert if any self-tests
have failed and report at the very end.
Disable test on x86_64.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The intent of this Kconfig is to allow libc stdout
functions like printf() to send their output to the
active console driver instead of discarding it.
This somehow evolved into preferring to use
printf() instead of printk() for all test case output
if enabled. Libc printf() implementation for both
minimal libc and newlib use considerably more stack
space than printk(), with nothing gained by using
them.
Remove all instances where we are conditionally
sending test case output based on this config, enable
it by default, and adjust a few tests that disabled
this because they were blowing stack.
printk() and vprintk() now work as expected for
unit_testing targets, they are just wrappers for
host printf().
Fixes: #13701
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This test can be on the boarder line with systems that only have 128K of
flash. Limit it systems with more for now.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove an unnecessary local variable to store the
return value, instead return directly thereby saving
few bits of memory.
Found using Coccinelle.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
After merging tinycrypt testcases, we left the original identifier, this
is not called crypto.tinycrypt.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Daniel Leung