A new CAN API is now provided in stm32cube packages.
STM32 can driver is implemented on top of initial CAN API which
is now legacy API.
Disable new API and enable legacy.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Format all cube packages to the same format before update to new
versions:
-Apply dos2unix
-Remove trailing white spaces
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Format all cube packages to the same format before update to new
versions:
-Apply dos2unix
-Remove trailing white spaces
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Format all cube packages to the same format before update to new
versions:
-Apply dos2unix
-Remove trailing white spaces
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Format all cube packages to the same format before update to new
versions:
-Apply dos2unix
-Remove trailing white spaces
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Format all cube packages to the same format before update to new
versions:
-Apply dos2unix
-Remove trailing white spaces
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This patch introduce version which fixes following bug:
It was possible to erase slot 1 while it stores confirmed image
while ongoing test run - this is unwanted behavior which allow
to even brick remote device accidentally.
This patch add check for such case of test run etc.
This also aligns condition required for erase command
execution to similar as upload command requires.
Origin: mcumgr
License: Apache 2.0
URL: https://github.com/apache/mynewt-mcumgr
Commit: 91a76b95b1b81aba06e30ee168e5ee5975cdfe93
Purpose: Bug Fix
Maintained-by: External
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Updates nrfx to the recently released version that corrects a few
imperfections in NFCT and USBD drivers.
Origin: nrfx
License: BSD 3-Clause
URL: https://github.com/NordicSemiconductor/nrfx/tree/v1.3.1
commit: d4ebe15f58de1442e3eed93b40d13930e7785903
Purpose: Provide peripheral drivers for Nordic SoCs
Maintained-by: External
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Under GNU C, sizeof(void) = 1. This commit simply uses uint8_t.
Pointer arithmetics over void types is:
* A GNU C extension
* Not supported by Clang
* Illegal across all ISO C standards
See also: https://gcc.gnu.org/onlinedocs/gcc/Pointer-Arith.html
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Pull in a more recent version of libmetal, motivated by the void
pointer fixes in efc33fe.
libmetal's b4b5bea to a4f7630 spans:
a4f7630 linux: device: fix max chars to copy for the dev name
10a0d5b lib: system: freertos: mutex: change to use atomic_int ...
4e670c5 ci: Zephyr env var for toolchain
3bef6f0 cmake: Fix Zephyr library integration
13158c3 compiler: add IAR compiler file
0820a2e microblaze: suppress io 64-bit R/W access if 64 bit atomic ...
e2e5608 io: suppress io 64 bit R/W access if 64 bit atomic not ...
efc33fe io: fix compilation error for void pointers.
32ad1d2 cache: fix compilation issue
c1ade0d travis CI: update Zephyr SDK version to 0.9.3
c49d7cd travis CI: updated arm compiler ubuntu package
d279a6a travis ci: Update FreeRTOS download path
5c70105 irq: update sys_irq_restore_enable and sys_irq_save_disable
05f0cd4 cmake: Only look for doxygen package if docs enabled
b4b5bea zephyr: Introduce WITH_ZEPHYR_LIB option
At current time of writing, libmetal's HEAD is 5bc2106641.
However this failed to build in their Travis CI.
The latest passing commit is a4f7630.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Add mcux 2.4.0 drivers and device header files for mimxrt1061 and
mimxrt1060. Updates several drivers that were already imported for
other SoCs but also apply to mimxrt1061 and mimxrt1062.
Origins: NXP MCUxpresso SDK 2.4.0
URL: mcuxpresso.nxp.com
Maintained-by: External
Signed-off-by: Ryan QIAN <jianghao.qian@nxp.com>
Fix compilation of sam0 serial driver on sam21dj18a by converting _U()
to __U() and _L() to __L() in sam21dj18a.h.
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
There is a little bit of floating point code in cy_sysclk.c. For now
add compile protection for this code using CONFIG_FLOAT. This code
utilizes some libm functions like ceil(). So if / when the functions
Cy_SysClk_EcoConfigure & Cy_SysClk_FllConfigure are needed we'll also
new to probably pull in newlib.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add initial support for building Cypress PDL as part of Zephyr.
Signed-off-by: Nazar Chornenkyy <nazar.chornenkyy@cypress.com>
Signed-off-by: Oleg Kapshii <oleg.kapshii@cypress.com>
Adds new entries needed by nrfx in version 1.3.0 so that it is
properly adapted for being used in Zephyr.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Updates nrfx to the recently released version containing new drivers
for NFCT and USBD peripherals and enhanced SAADC HAL.
Origin: nrfx
License: BSD 3-Clause
URL: https://github.com/NordicSemiconductor/nrfx/tree/v1.3.0
commit: 67710e47c7313cc56a15748e485079831ee6a3af
Purpose: Provide peripheral drivers for Nordic SoCs
Maintained-by: External
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Library will be used by new shell implementation.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Introduces a new mcux lpspi shim driver to be used on the imxrt soc.
This shim driver leverages heavily from the mcux dspi shim driver
because the MCUXpresso SDK provides similar APIs for the lpspi and dspi
peripherals.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Origin: Apache Mynewt NFFS
URL: https://github.com/apache/mynewt-nffs/tree/master
Commit: a2f679afe6323310ab1000385f41115df7da326e
Maintained-by: External
This patch introduce version which fixes following bug:
While inode is updated it is possible that Garbage Collection
is called which caused overwrite of inode's filename as the same
buffer was used to keep the filename and copping data in GC.
This patch uses buffer on the stack for keeping filename while inode
is updated which fix the issue.
The patch cause 128 B increase of stack consumption during inode
update the file name might be corrupted
Fixes#9749
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Updates nrfx to the recently released version containing needed
enhancements of GPIOTE and PPI HALs.
Origin: nrfx
License: BSD 3-Clause
URL: https://github.com/NordicSemiconductor/nrfx/tree/v1.2.0
commit: d19018ed334c26f0d9eb35cf7f5a622df8d54346
Purpose: Provide peripheral drivers for Nordic SoCs
Maintained-by: External
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Since 2.9.0 release mbedTLS has some minor functional improvements,
security fixes and bug fixed. A list with all changes can be found
in:
./ext/lib/crypto/mbedtls/ChangeLog
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This commit adds translation layers to make nrfx drivers for the nRF
ADC (nRF51 series) and SAADC (nRF52 series) peripherals accessible via
the Zephyr's API. The SAADC peripheral is accessed using nrfx HAL only
as it turns out that usage of the nrfx driver in this case would be
inconvenient and would unnecessarily complicate the shim.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Remove this feature specific to QMSI and available through samples only
to allow for migration to tracing hooks.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The error is detected if USART1 TX configured to PA9 and RX to PA10.
The serial cable removal stops the USB communication.
In case of VBUS sensing deactivation, erroneously
both USB_OTG_GCCFG_VBUSBSEN and
USB_OTG_GCCFG_NOVBUSSENS are set in GCCFG.
Correct handling is:
- VBUS sensing deactivation: set USB_OTG_GCCFG_NOVBUSSENS in GCCFG.
- VBUS sensing activation: set USB_OTG_GCCFG_VBUSBSEN in GCCFG.
ST Bug Tracker ID: 34714
Signed-off-by: Istvan Bisz <istvan.bisz@t-online.hu>
Consistently use
config FOO
bool/int/hex/string "Prompt text"
instead of
config FOO
bool/int/hex/string
prompt "Prompt text"
(...and a bunch of other variations that e.g. swapped the order of the
type and the 'prompt', or put other properties between them).
The shorthand is fully equivalent to using 'prompt'. It saves lines and
avoids tricking people into thinking there is some semantic difference.
Most of the grunt work was done by a modified version of
https://unix.stackexchange.com/questions/26284/how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some
of the rarer variations had to be converted manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A new CAN API has been delivered on recent L4 stm32cube.
This new API breaks current CAN driver. Disable the new API and
enable the legacy API.
Fixes#8931
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
A new CAN API has been delivered on recent F7 stm32cube.
This new API breaks current CAN driver. Disable the new API and
enable the legacy API.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
A new CAN API has been delivered on recent F4 stm32cube.
This new API breaks current CAN driver. Disable the new API and
enable the legacy API.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Up until now, Zephyr has patched Kconfig to use the last 'default' with
a satisfied condition, instead of the first one. I'm not sure why the
patch was added (it predates Kconfiglib), but I suspect it's related to
Kconfig.defconfig files.
There are at least three problems with the patch:
1. It's inconsistent with how Kconfig works in other projects, which
might confuse newcomers.
2. Due to oversights, earlier 'range' properties are still preferred,
as well as earlier 'default' properties on choices.
In addition to being inconsistent, this makes it impossible to
override 'range' properties and choice 'default' properties if the
base definition of the symbol/choice already has 'range'/'default'
properties.
I've seen errors caused by the inconsistency, and I suspect there
are more.
3. A fork of Kconfiglib that adds the patch needs to be maintained.
Get rid of the patch and go back to standard Kconfig behavior, as
follows:
1. Include the Kconfig.defconfig files first instead of last in
Kconfig.zephyr.
2. Include boards/Kconfig and arch/<arch>/Kconfig first instead of
last in arch/Kconfig.
3. Include arch/<arch>/soc/*/Kconfig first instead of last in
arch/<arch>/Kconfig.
4. Swap a few other 'source's to preserve behavior for some scattered
symbols with multiple definitions.
Swap 'source's in some no-op cases too, where it might match the
intent.
5. Reverse the defaults on symbol definitions that have more than one
default.
Skip defaults that are mutually exclusive, e.g. where each default
has an 'if <some board>' condition. They are already safe.
6. Remove the prefer-later-defaults patch from Kconfiglib.
Testing was done with a Python script that lists all Kconfig
symbols/choices with multiple defaults, along with a whitelist of fixed
symbols. The script also verifies that there are no "unreachable"
defaults hidden by defaults without conditions
As an additional test, zephyr/.config was generated before and after the
change for several samples and checked to be identical (after sorting).
This commit includes some default-related cleanups as well:
- Simplify some symbol definitions, e.g. where a default has 'if FOO'
when the symbol already has 'depends on FOO'.
- Remove some redundant 'default ""' for string symbols. This is the
implicit default.
Piggyback fixes for swapped ranges on BT_L2CAP_RX_MTU and
BT_L2CAP_TX_MTU (caused by confusing inconsistency).
Piggyback some fixes for style nits too, e.g. unindented help texts.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Update tinycrypt to latest revision, two commits after 0.2.8 release.
These commits are only bug fixes and one of them is fixing incorrect
buffer size in decryption with CBC mode.
This algorithm is being used by tinycrypt shim and is tested in
samples/drivers/crypto/.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
- Remove redundant 'n' defaults. 'n' is the default value for bool
symbols.
This makes the auto-generated documentation clearer as well: You get
"implicitly defaults to n" instead of
"- n if <propagated dependencies>".
- Shorten
<type>
prompt "foo"
to
<type> "foo"
This works for all types, not just bool.
- Various formatting nits.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This README is based on the commit that added the HAL:
* b94d572a6 (Import Atmel SAM E70 header files from ASF library)
And documents all the patches that were applied so far:
* 133306152 (Add missing header files symbols for Atmel SAM E70)
* 9670dc582 (Remove unused and broken preprocesor macros)
* e5e99d199 (Add missing interrupt number definitions)
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
If the mcux driver has PTP support, then enable
ENET_ENHANCEDBUFFERDESCRIPTOR_MODE in HAL.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to use only four low order bits from first byte of PTP message
as that contains the message type value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix timestamping in MCUX external library. The nanosecond part of the
frame timestamp wasn't saved.
Signed-off-by: Julien Chevrier <julien.chevrier@intel.com>
__LINUX_ERRNO_EXTENSIONS__ gets defined in HAL/inc/sys/alt_errno.h,
however we also need to define this if we are building with newlib. So
add a simple ifdef guard to only define __LINUX_ERRNO_EXTENSIONS__ if
its not defined already.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
NXP periodically releases new versions of the MCUXpresso SDK (mcux).
Automate the process of importing mcux into zephyr with a python script.
Example usage:
$ import_mcux_sdk.py -f SDK_2.3.0_EVK-MIMXRT1050.tar.gz
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Default configuration of config-tls-generic.h mimics the current default
config file configuration - config-mini-tls1_2.h, thererfore it can be
safely used instead of it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Erwan Gouriou