CC2520 is not embedded on an arduino_101, it is however possible to wire
one, and thus it requires to provide cc2520_configure_gpios() function.
This one, being common to a101 is found in samples/net/common.
Change-Id: I86f2734847edb3f6a968522afccc3099ed854d13
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If we cannot send a network packet, do not quit as that is
really not necessary here.
Change-Id: I7613d46bdbc849b75aaf0fc71c58beba810fd658
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the default board is qemu_x86, make sure there is similarly
named config file that can be used by default.
Change-Id: Ibc480d3b4eecc2601e3670c8da19be9c01833c36
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use by default a board specific config files for both
echo-server and echo-client sample applications.
This makes more sense than using the network technology specific
config file that was used earlier.
Change-Id: I155fc138f4b0ed1166f4e25267513afc3fb6fd76
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove legacy stack artifacts from the echo-server and echo-client
config files.
Change-Id: Icc591b9540495c4ee181517369b0df9bb91972bb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the native IP stack is now the default, there is no need
for corresponding Kconfig option.
Change-Id: I08e4992f540f928a2b7378e8803e634e38725348
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit removes the legacy Contiki based uIP stack.
The new native IP stack must be used after this commit.
The commit also removes following things:
- legacy cc2520 driver
- legacy ethernet drivers
- legacy IP stack samples
and changes these things:
- disabled tests that only work for legacy IP stack
- select new IP stack by default
- enable random number generator by default as it is needed
by the new IP stack
Change-Id: I1229f9960a4c6654e9ccc6dac14a7efb9394e45d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
My IPv4 address was missing because of complex set of #ifdef's.
Change-Id: I6768587d3e104a57c10756bc43267f26068aa3cb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The used IPv6 or IPv4 address can be set in the config file.
This way one does not need to edit the source file to setup
the desired IP address.
Change-Id: Ic900bd4694481b4b035026ad0ba7b9280eb84e4a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Let the echo-server listen any configured IPv4 address
by default.
Change-Id: Ib83c5e069ae1e26615c37fa980bc4009b5a5e40c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user has enabled DHCPv4 support, then do not try
to set static IPv4 address.
Change-Id: Ia359f578044d72b951f53c509c92c09d575207f0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds the required code to echo server so that it works with TCP as
well.
Change-Id: Ib45dd91a52a60ddb4d8f0ae11175ceb52199c398
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This is meant to test echo applications with 802.15.4 L2 directly in
qemu.
Change-Id: I0edccd8c39360421dc77e0064147221d86877bdf
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Previous commits support auto configured IPv6 addresses so no
need to manually tweak the address settings.
Change-Id: Ie641212981a04229721c84990a54876977d9cfc4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit fixes the case when we receive large amount of
data and then copy it into new fragments. If the MTU is larger
than the fragment size, then it is possible that we might
overwrite net_buf memory and crash. This is typical in ethernet
network.
Change-Id: Ib1c65819c3bc718ec04f558e3df235246b5655dd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit allows echo-server to listen all defined addresses
specified to its network interfaces.
Change-Id: I52874210f6987c75d7921e514399a9eda55911bb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Forcefully set the IPv6 address in echo-server so that we
can use that address when sending data. Normally this should
not be done like this as the system should autoconfigure itself.
Change-Id: I99041539c50f994f5d3ddaabaf5cac8599d82078
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This change is related to patch called
"net: Adapt to new behavior of net_buf_frag_add"
This version removes extra net_nbuf_unref() from
the code. The unref was done because net_buf_frag_del()
did not remove the double ref from the list element.
Because of the other patch, the list does not have
double ref any more, so we need to remove the extra
unref in couple of extra places.
Change-Id: If90e01c24b9b4e68afbfa283850d2a1ecb3065ed
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This creates initial TCP handling logic but does not yet
enable fully working TCP connection.
Some of the connection logic is taken from FNET TCP
implementation.
Origin: FNET 3.6.1
URL: https://github.com/butok/FNET/blob/master/fnet_stack/stack/fnet_tcp.c
Change-Id: I1e100d9fa9c91437562b933d94d0bd3db1a5885e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Extends the echo server and echo client samples to work with YAIP
network stack with ethernet L2 layer and ENC28J60 ethernet device
on Arduino 101 boards.
Jira: ZEP-859
Change-Id: I242e5555aff18741bf00a551424b081b5396f4b3
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Add socklen_t addrlen parameter to net_context_bind(),
net_context_sendto() and accept callback.
Currently the address length option is not really mandatory
as we can figure out the length from the address family.
But if we are going to support other protocol address families
it might be needed.
Change-Id: I59206465c3259050c469c5b2150221646a9a08d7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When running echo-server in the Zephyr device (either a real
device or qemu), set the IPv4 address to be 192.0.2.2. The host
IPv4 address should be set to 192.0.2.1 in this case. This change
is similar to IPv6 address change made earlier (now both IPv4 and
IPv6 addresses on device side end with "2", on host side, with "1").
Change-Id: I639b7be4403b4b2f38f01675d0ef56eaabf0f82c
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When running echo-server in the Zephyr device (either a real
device or qemu), set the IPv6 address to be 2001:db8::2.
The host IPv6 address should be set to 2001:db8::1 in this case.
Change-Id: Ia967cecabece4b06a2f5a12b11c68a9de4aeb2af
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The prj_slip.conf file should be used for qemu-to-host
communication only. It is not usable for testing between
two qemus.
Change-Id: Id06813a1b36f33f585e06df3f29479891ea3d2d8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Echo-server no longer reverses the data as doing it
when we have a fragment chain is quite challenging.
Change-Id: I298669f3ddba67000672320e7b3b14f72e9f12d4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net_context.h is missing and one variable had a wrong name.
Change-Id: I4aac2f5c12cea39553fb86d1bd497c88f0ef1963
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_core.h is the ground brick of the IP stack, and thus should not
include other headers that might include net_core.h also: this would
create circular dependencies.
Change-Id: I70c17b736788528e4e0b4b5b2c478098b049c9b1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This allows to test things between qemu and host when
using slip.
Change-Id: I27e17de9f0d8c2c8406f0afdd66c295e827f87a0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use 192.0.2.0/24 address space that is specified in RFC 5737.
Change-Id: Iff2545f5b0f4817c99813c986d57801e166967a3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Check if we have received IPv4 packet and call a handler
function to process it.
Change-Id: I9f9e5f0888d2c3b91401c98f4925647ddce09962
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This echo-server does not yet do anything useful.
Change-Id: I317051b3a2bfb0a80584ad385c2f308978a243cd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Restructure the Bluetooth options more logically.
- Both host and controller are now behind the same high level
CONFIG_BLUETOOTH.
- Selecting controller support disables other HCI driver selection, so
the controller isn't in the same list as HCI drivers any more.
- Under the top-level there's a "Custom stack" option, which when
enabled opens up the option of choosing CONFIG_NBLE.
There are various other cleanups and simplifications in this patch as
well, since splitting these up would have been fairly tricky while
making sure all test cases still build.
Change-Id: I5bb715cb9d20201cb8b72fbd149c8a09a4b2d7d2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Incase of slip or ethenet use, if these is too much incoming data
current buffer count is not sufficient. Noticed with TCP client
and server example. So increasing it to avoid not enough Rx buffers
issue.
Change-Id: I6eef51c28c7c4751955aa4403122bf17d55ce12c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Remove generic PRINT macros from net samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I4bec179c99056cce41e1f3495c162f25c3cd2364
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
ieee802154 driver is now using new system log macros, update the
Kconfig variable to be a level rather than a bool and the .conf
files at samples.
JIRA: ZEP-311
Change-Id: I640e973d880c3a222cd7c13a72d35edf49ada3a8
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Follow up to TSC decission for further discussion in the networking
WIG.
Change-Id: I148b484dfe308661573e47ed3e60cceed673bddf
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
net_core.h is the ground brick of the IP stack, and thus should not
include other headers that might include net_core.h also: this would
create circular dependencies.
Change-Id: I70c17b736788528e4e0b4b5b2c478098b049c9b1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Makes it possible to test things between qemu and host when
using slip.
Change-Id: I27e17de9f0d8c2c8406f0afdd66c295e827f87a0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use 192.0.2.0/24 address space specified in RFC 5737.
Change-Id: Iff2545f5b0f4817c99813c986d57801e166967a3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Check if we have received IPv4 packet and call a handler
function to process it.
Change-Id: I9f9e5f0888d2c3b91401c98f4925647ddce09962
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This echo-server does not yet do anything useful.
Change-Id: I317051b3a2bfb0a80584ad385c2f308978a243cd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tags should be separated with spaces no with comma.
Change-Id: I5381200bcd0caf59f3601ec849d698966c734a28
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Tomasz Bursztyka