Sidebar navigation for supported boards is wonky: opens to show
all boards (making for lots of scrolling to see the sidebar) and
sidebar items aren't always clickable (as explained in the JIRA
issue).
Fix is to not use multiple toctree directives in boards.rst and
create intermediate architecture-specific supported board docs.
JIRA: INF-132
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
patch adds necessary files and does the modification
to the existing files to add device support for
arduino_101 board.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Add board metadata to be consumed by the sanitycheck script to provide
better matching with testcases and to test based on features declated in
the board files.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some files have moved from their original location, or are no longer
available. For the mbedtls samples, tweak the link to point to a page
where links for current and previous downloads can be found.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Increase to 1024 to get more tests and sample running on this device
with only 8K of SRAM.
Change thread stack size in the mslab test to make it fit into this
board.
Jira: ZEP-2079
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
More general spelling fixes, and cleaning up stray UTF-8 characters
such as curly-quotes, em- and en-dashes. Use replacement strings
for |reg| and |trade|.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Enable it by default now that the eth_dw driver has been ported to the
new IP stack.
Jira: ZEP-1652
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Adds event based scheduling logic to the kernel. Updates
management of timeouts, timers, idling etc. based on
time tracked at events rather than periodic ticks. Provides
interfaces for timers to announce and get next timer expiry
based on kernel scheduling decisions involving time slicing
of threads, timeouts and idling. Uses wall time units instead
of ticks in all scheduling activities.
The implementation involves changes in the following areas
1. Management of time in wall units like ms/us instead of ticks
The existing implementation already had an option to configure
number of ticks in a second. The new implementation builds on
top of that feature and provides option to set the size of the
scheduling granurality to mili seconds or micro seconds. This
allows most of the current implementation to be reused. Due to
this re-use and co-existence with tick based kernel, the names
of variables may contain the word "tick". However, in the
tickless kernel implementation, it represents the currently
configured time unit, which would be be mili seconds or
micro seconds. The APIs that take time as a parameter are not
impacted and they continue to pass time in mili seconds.
2. Timers would not be programmed in periodic mode
generating ticks. Instead they would be programmed in one
shot mode to generate events at the time the kernel scheduler
needs to gain control for its scheduling activities like
timers, timeouts, time slicing, idling etc.
3. The scheduler provides interfaces that the timer drivers
use to announce elapsed time and get the next time the scheduler
needs a timer event. It is possible that the scheduler may not
need another timer event, in which case the system would wait
for a non-timer event to wake it up if it is idling.
4. New APIs are defined to be implemented by timer drivers. Also
they need to handler timer events differently. These changes
have been done in the HPET timer driver. In future other timers
that support tickles kernel should implement these APIs as well.
These APIs are to re-program the timer, update and announce
elapsed time.
5. Philosopher and timer_api applications have been enabled to
test tickless kernel. Separate configuration files are created
which define the necessary CONFIG flags. Run these apps using
following command
make pristine && make BOARD=qemu_x86 CONF_FILE=prj_tickless.conf qemu
Jira: ZEP-339 ZEP-1946 ZEP-948
Change-Id: I7d950c31bf1ff929a9066fad42c2f0559a2e5983
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I27d51c316144251939b20cfa6787ff7ab8035fe6
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
I2C_SHARED_IRQ, I2C_0_IRQ_SHARED, I2C_0_IRQ_DIRECT Kconfig options
are DW driver specific. Its presence is confusing for a user of any
other I2C driver than DW. This patch renames these options to include
DW string and makes it visible only for DW I2C driver. This is a
similar implementation to that used by ETH DW Ethernet driver.
Change-Id: I795506f9b103c028a22317df9ad632dce5cd1343
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
OPENOCD_PRE_CMD, OPENOCD_POST_CMD variables require adding
'-c' in front of an actual OpenOCD command. This is in contrary
to other OPENOCD_*_CMD varialbles which specify OpenOCD commands
directly. This patch aligns usage of various OPENOCD_*_CMD variables.
It is no longer required to add '-c' in front of OPENOCD_PRE_CMD,
OPENOCD_POST_CMD variables.
Change-Id: I276fab00b099694c83c3bf74aa5dd59c8d6a308b
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Now both flashing over DFU and JTAG are supported, however JTAG needs a
special connection, so DFU is the current out of the box supported
method for flashing.
Jira: ZEP-1785
Change-Id: I47ffce3b332b99ef6c6afdce2214709a4fa5b946
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
At the moment CC2520 configuration options are selected inside "TI
CC2520 Driver RAW channe" submenu like:
[*] TI CC2520 Driver support ----
[ ] TI CC2520 Driver RAW channel --->
Make RAW channel depends on TI CC2520.
Change-Id: I92879b7f4391f1842c012b6c03c78956e90b9441
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This builds the zephyr OS image with the proper flash offsets for
slot 0.
After building, the image needs to be signed using the zep2newt.py
script included in the MCUBoot repo:
./scripts/zep2newt.py --vtoff 0x200 --word-size 4 --sig RSA \
--key root-rsa-2048.pem --bin <path to zephyr.bin> \
--out <path to zephyr.bin>
And then run 'make flash'.
Change-Id: I4739c0b7912c8066882208cb450a8224d433965b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- Fix path to pinmux.c
- Fix note markup
- s/TTY-to-USB/TTL-to-USB/ ; s/adaptor/adapter/
- Recommend 3.3V TTL serial cable
- Consistent use of "Flyswatter2" official spelling
- s/UART0/UART1/
- Provide CONFIG_ARC_INIT relevant value
- s/for for/for/
- Consistent naming of JTAG 2x5 male pins as "micro JTAG header"
- s/orange/green/
- The Arduino 101 micro JTAG header connects to the Flyswatter2
via the ARM Micro JTAG Connector
- Consistent case
- $USERNAME is not set on Ubuntu, $LOGNAME is POSIX-compliant
- su requires root password, 'sudo su' only requires user password
- Exit root session when done creating udev rule
- Note: code-block above should be rewritten using 'sudo tee'
- s/X86/x86/
- Fix paths to i586-zephyr-elfiamcu-gdb and arc-zephyr-elf-gdb
- samples/hello_world does not set CONFIG_ARC_INIT=y, so suggest
using tests/booting/stub instead
- s/debugserver/debug server/
- s/BLUETOOTH_DEBUG_STDOUT/BLUETOOTH_DEBUG_LOG/
- s/bottle neck/bottleneck/
Change-Id: I4a76020f67d9672f59eae52f78c5caeb9e513aee
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
Explain how to create the udev rules granting access to the
Arduino 101 board in DFU mode.
Explain the available methods to flash the Arduino 101 board:
either manually with dfu-util command line,
or automated with ZEPHYR_FLASH_OVER_DFU=y and 'make flash'.
Provide instructions for x86, ARC and BLE cores, using distinct
code-blocks for the manual and make-assisted methods.
Change-Id: I0f9fe3849dec3c2dc2249b77d31d4f2414c98331
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
Let 'make flash' invoke the dfuutil.sh support script, and
export the relevant DFUUTIL_* environment variables, for all
3 cores of the Arduino 101 board: x86, ARC and BLE.
This is backward compatible with the current usage of OpenOCD
over JTAG, since this is only enabled when the environment
variable ZEPHYR_FLASH_OVER_DFU is set to y.
Change-Id: Ic5528cb87a180378d7120d150c27d1e24c9ebe75
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
Though the SPI_CS_GPIO Kconfig entry (in drivers/spi/Kconfig) has
"select GPIO" specified, we are observing that merely adding
the symbol(SPI_CS_GPIO) in the
defconfig (boards/x86/arduino_101/Kconfig.defconfig)
is triggering unmet direct dependency warnings
(though the build goes through).
Since the defconfig entry(SPI_CS_GPIO) is not selecting
the aforementioned 'select' rule, we add it manually here.
Jira: ZEP-1668
Change-Id: Ida6a0c851462d747e6559bd0c78fa52e1d0f24b5
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
With the default of 192, the x86 rom will span from
0x40010000 - 0x4004000. However the default starting
ROM address for the ARC side is configured to be
0x40034000. If the x86 image is large enough it will
clobber the ARC code. Shorten the x86 side such that
its last flash address is 0x40033FFF.
Change-Id: I23987c3db11f0e51c2405b8baee114aee39de571
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This reverts commit b3a2fc287b.
The firmware on production board will have a faster Baudrate.
Change-Id: Ifa1abd4c2f882b8ef6e7d9762fc592524177dc48
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently the BLE modules on the Panther boards are configured to use
a 115200 baudrate.
Change-Id: I093db68c0fc172757b5878401b99ada7ae0c99d9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Panther is a board based on Quark SE C1000 SoC.
Change-Id: I66653c40efcb7e04748a21ea622debee23d7d6c0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit changes Kconfig prefix for ieee802154 drivers to
IEEE802154_*. This is done for consistency with config prefixes
used in other subsystems.
Change-Id: Ibbb4d96d2b748f4f13135bde85304ec34c5a90a6
Signed-off-by: Wojciech Bober <wojciech.bober@nordicsemi.no>
Add a label in the arduino 101 document for the flashing
bluetooth instructions, and link to that instead of the
wiki page (deprecated).
Change-Id: Ie39240cdf4881356f634d21ead1d7ae93ccd60a1
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Remove dev driver and integrate it in the default pinmux driver.
Jira: ZEP-958
Change-Id: I55670240f8a21749d3a6ae22e300e16ba80a2fb6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The headings on some .rst files were not following the expected
heading order of using # for h1, * for h2, = for h3, and - for h4
This patch fixes that, and the doc/templates/*.tmpl files created
for folks to use as templates for creating board and sample docs.
Change-Id: I0263b005648558d5ea41a681ceaa4798c9594dd9
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This will replace the current goal of 'make qemu' with 'make run' and
moves Qemu handling into its own file and into the boards instead of
being architecture specific.
We should be able to add new boards that support some other type of
emulation (by adding scripts/Makefile.<emu type>) and allow the board to
define their own options for the use type of emulation.
'make qemu' will still work, however it will be deprecated, starting
with this commit it is recommended to use 'make run'.
Jira: ZEP-359
Change-Id: I1cacd56b4ec09421a58cf5d010e22e9035214df6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Anas Nashif