CONSOLE_HANDLER depends on UART_CONSOLE so this define is not needed.
Also mark parameter unused.
Change-Id: I58b52955a22de3fb3216454a1d802eef63c9f845
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Configure IOAPIC for Bluetooth interrupts connected to UART.
Change-Id: Iad58f52e95c05245d38dd0f4cb10494b53bad8e0
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Configure IOAPIC for Bluetooth interrupts connected to UART.
Change-Id: Ia93f71a8e8435c523dd8ee232f9ce4cf9266b978
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Configure IOAPIC for Bluetooth interrupts connected to UART.
Change-Id: Ib9c208a1d396bb6f51531e970d515e42ff416e6c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Change-Id: Ie051000e3d3f0f5bdc330d0265010c37acb873bd
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: Iff0d922a7b9ad498820527e71b31701bb06c400e
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I2276676142deea21cf8079449ce153f2fb887a8e
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I819d13f0d7a23e3a61dcda6a3ced18810b192158
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: Ie655181d5ed11a71cadfa218f396f0b64992ca34
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I6da43e41f9c6efee577b70513ec368ae3cce0144
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Moving many of the functions from the old format of inline comments to
the newer doxygen format.
Change-Id: Ib0fe0d8627d7cd90219385a3ab627da8f9637d98
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This workaround is no longer required.
Change-Id: I797237be77b7568fe836df0e82640027d8d4882b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Updates several files to remove mention of Diab toolchain
support, which is no longer supported. These changes do not
affect system operation.
Change-Id: If9de85e595f6685295e565bc94ca17f51d87513f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This implements the get function for the Galileo pinmux
driver. Also modify the set function so that the get
function would work correctly.
Change-Id: I463b01a903389a9c640bb1354ce92b9c0e37030f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If console handler is defined uart console should also be defined.
Change-Id: I3efcc6c837f8f1621340f7f13bf0603d7dc42fb2
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Only driver specific public headers should be found in include/drivers.
All generic API are found in include/ directory.
Change-Id: Ic50931987bb9460fd4a3843abc6f5de107faf045
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add a context value to the ioapic and loapic mkstub macros to allow
the developer to specify a context value that will be passed on the
stack to the interrupt service routines.
All the invocations for the loapic_mkstub and ioapic_mkstub macros
have been changed to pass in 0 so there is no functional difference
ATM. This change removes the need for drivers to have trampoline ISR
routines to pass a context vaule to their generic ISR routine.
This is the first step in getting rid of the hack where the driver
needs to look into the __initconfig_* linker objects.
Change-Id: I2c5eaa20d8cb5a42ef445762c426854be32c8452
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Gets rid of obsolete #ifdefs, since the name of a UART device's
associated variable is now constant regardless of when it is
initialized.
Change-Id: Ic6b5ce7777f067fb57aee33899a644c63040d41f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of the trailing initialization level character from the
name of the device variable generated by the macro, since it serves
no useful purpose. (The linker scripts place the various initialization
sections in ascending order based on the name of the section, so there
is no need to embed the initialization level in the variable name itself.)
Change-Id: I56bb79a513b8f77fb1f3fbaccec14454c2520772
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Currently when an unhandled exception or trap occurs, we don't know
specifically which one happened. The CONFIG_EXCEPTION_DEBUG option
installs handlers for various exceptions and prints out details
when they happen.
Change-Id: I4d3fe4544c3e2583c4f83b306b86ac0595d9ce0e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Updates the 'gen_idt' tool to generate a bitmap of (statically) allocated
interrupt vectors that is linked into the final image in a manner similar to
the static IDT. The kernel then uses this bitmap when dynamically connecting
an interrupt vector, thereby preventing the dynamic irq connections
from clobbering the static irq connections.
Change-Id: I0a8f488408dad4912736865179f32f63ff1ca98f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds two new fields to the ISR_LIST structure (irq and priority) to allow
the decoupling of the vector ID and priority from the IRQ number at some
future time.
As a result of the addition of these two new fields, the gen_idt tool is
modified to both process these new fields as well as validate them.
Change-Id: I343dac68d99c78168a25b19784140f85d5db7578
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Instead of using logic choosing between invoking find_lsb_set() and
find_msb_set(), mask out the unwanted bits and always invoke find_lsb_set().
This also has the side benefit of simplifying the error checking when DEBUG is
enabled.
Change-Id: I7f3e529ab3807b4433291197793e79e371d06ae3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
When dyanmicaly connecting an interrupt via irq_connect(), interrupts must be
locked both when allocating a dynamic interrupt stub and when updating the
interrupt descriptor table (IDT) to prevent race conditions.
Change-Id: I9c68c1f73dda478880f1a32793a84cb6eb87735e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Move Zephyr specific CFLAGS that depend on config options to
the Makefile where they can better be managed among other cflag
options.
Change-Id: Ia79a2f2def4f51857f6d661aa78e9fb7eb7a5e22
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not use micro_* or nano_* defconfigs, instead maintain platform
in one single defconfig and merge nano or micro support on top.
Change-Id: I0d5184f37865ed8312e516e48cf5a8584a287dfe
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Setting up the right SPI port, its configuration and max frequency.
Also, setting NANO_TIMEOUTS by default as it is required for delayed
operation inside ADC's driver.
Change-Id: I63b2b872ff858f1d80065a94ba3e2f303d279a67
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Taking the opportunity to set simpler driver names for port 0 and 1.
Change-Id: I994bc43daaf6bc43b0dad564a72577c874f72d2d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
*_PORT_1_* not *_PORT_0_* obviously.
Change-Id: Idefad40c25b4ad54d9558355daab224bc634c2e7
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Galileo SPI interrupt is of type level low, thus setting it to this
value in Galileo's defconfig and removing useless entry in Kconfig.
Change-Id: I90bcc74be1a957bf59912d6f8c2234cfa4fe2329
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Needed to get simple uart driver working in qemu with
SLIP networking or qemu<->qemu network testing. Because
this is only needed in qemu the patch only touches ia32
platform.
This can conflict with Bluetooth in x86 and qemu so caveat emptor.
Change-Id: Iba20543f968c8fd37ee36747d9aa1ad3f782057d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Kconfig can't set the default for a choice, so it has to be done
using select.
Change-Id: I1d952eb48a7bcda79b4f8ff475110c7430be7b4e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
do not use microkernel or nanokernel as the output binaries,
instead, use zephyr globally.
Also change the documentation to reflect this.
Change-Id: I8405761d1a0392c90cdfeec5c67d72eb4e5a76ff
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
PCI information and integration of designware's gpio controller
with shared irq.
Change-Id: I80c7fed35ff328e06d87ebad3e2f68fdd6f5672e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Since the console is not yet setup, there will be nothing to be printed
out. Also, it adds a dedicated init function which is only useful for
it. Instead, debugging PCI enumeration can be simply done in application
side.
Change-Id: Ia8384caa97d43f0bc4300ecf36bc11d1b8bd5581
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As long as PCI_ENUMERATION does not work for all IP block, let's provide
pre-configured base address registers for ns16550 on Galileo.
Once PCI_ENUMERATION will be fixed, such pre-configured settings will
not be used at runtime.
Change-Id: I514b3a5759e3af04132c7801f37033108a7b279b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Providing the right settings through Galileo's Kconfig.
Change-Id: Ia5339eb90cb98d7dde3be0493bcfd9a6b6db60ed
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add Kconfig option to specify how interrupt is triggered for SPI.
Also enabling such support for Galileo platform.
Change-Id: Id3112d100089197940f826b827493174d0f22669
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Perform configuration of the shared IRQ has to be done earlier,
as the config code masks the interrupt by default. If configuration
is done after shared_irq_enable() is called, the interrupt is
effectively masked. So move the init level a bit earlier.
Change-Id: Ic7f059628e3cf122d323513e171c7d1a09e5d4a6
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Andrei Emeltchenko