Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Convert to the new GPIO API using logical levels, and remove the
duplicate implementation of LED control that existed.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The sensor API returns the temperature in celsisus degree. The Bluetooth
temperature characteristics uses M = 1, d = -2, b = 0, which corresponds
to a resolution of 0.01 degree. This means that the value returned by
sensor_value_to_double has to be multiplied by 100.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The mesh_badge sample uses a GATT Characteristic instead of a Mesh
Device Property to report the temperature. In addition to that the
status message is filled with with a GATT Unit instead of a the Mesh
Device Property.
Fix that by reporting a Present Device Operating Temperature, ie 0x0054
instead. This has the advantage of keeping the an s16t value to report
the temperature. This however change the marshalled format from B to A.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When the value of an unknown sensor property ID is requested, the length
field should represent the value of zero, as explain in the comment in
sens_unknown_fill. However the marshalled representation of a zero
length is wrong in the code. The format A uses a 1-based uint4 length
value, so the range 0x0–0xF represents the range 1-16. The zero length
is represented by format B using the 0x7F value.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The order of the fonts in ROM has changed.
Since the sorting is not wrong, correct the
order in the application.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
We use the following commands to rename any
LED._GPIO_{CONTROLLER,PIN,FLAGS} to
DT_ALIAS_LED._GPIOS_{CONTROLLER,PIN,FLAGS}
git grep -l LED._GPIO_CONTROLLER | xargs sed -i 's/LED\(.\)_GPIO_CONTROLLER/DT_ALIAS_LED\1_GPIOS_CONTROLLER/g'
git grep -l LED._GPIO_PIN | xargs sed -i 's/LED\(.\)_GPIO_PIN/DT_ALIAS_LED\1_GPIOS_PIN/g'
git grep -l LED._GPIO_FLAGS | xargs sed -i 's/LED\(.\)_GPIO_FLAGS/DT_ALIAS_LED\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introduce a separate buffer pool for events which the HCI driver
considers discardable. Examples of such events could be e.g.
Advertising Reports. The benefit of having such a pool means that the
if there is a heavy inflow of such events it will not cause the
allocation for other critical events to block and may even eliminate
deadlocks in some cases.
Also update all mesh samples not to specify explicit RX buffer counts
anymore. Instead, create appropriate defaults in Kconfig so that we
only need to override this in the app for cases like the bbc:microbit
with limited memory.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We use the following commands to rename any
SW._GPIO_{CONTROLLER,PIN,FLAGS} to
DT_ALIAS_SW._GPIOS_{CONTROLLER,PIN,FLAGS}
git grep -l SW._GPIO_CONTROLLER | xargs sed -i 's/SW\(.\)_GPIO_CONTROLLER/DT_ALIAS_SW\1_GPIOS_CONTROLLER/g'
git grep -l SW._GPIO_PIN | xargs sed -i 's/SW\(.\)_GPIO_PIN/DT_ALIAS_SW\1_GPIOS_PIN/g'
git grep -l SW._GPIO_FLAGS | xargs sed -i 's/SW\(.\)_GPIO_FLAGS/DT_ALIAS_SW\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move sensor.h to drivers/sensor.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move gpio.h to drivers/gpio.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move flash.h to drivers/flash.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Hdc1008 driver is renamed into ti_hdc to prepare it to support all
available Texas Instruments HDC sensors (e.g. hdc1080, hdc2080).
Signed-off-by: Nikos Oikonomou <nikoikonomou92@gmail.com>
This makes use of BT_GATT_SERVICE_DEFINE to statically define services
for services that are not required to be dynamically registered.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The IV Index is always a 32-bit value, so using u16_t for it was
confusing. Create a define for it, similar to other constant values,
to get rid of this confusion.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It was possible to freeze the application by pressing the user button
too frequently. This was likely due to the stack not keeping up with
the send requests and running out of buffers.
Add rate-limiting to the app, so that at most one message per 500ms
can be sent. Also add a user message if the user presses the button
too many times in rapid succession, and inform the other badges of
this misbehaving user.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Convert ssd1673 display driver to use new defines so we can remove
the dts_fixup.h code for it. Also dropped "-spi" from compatible.
Fix up references in reel_board dts and sample.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The app is already sending period heart beat messages, and since it is
not designed to be used for such long times that would require IVI
Update, keep the secure network beacon sending disabled.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Suspend the mesh network after 30 minutes of inactivity. This should
help prolong the battery life of boards used at multi-day events, if
the user forgets to power off the device for the night.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
After this fix each LED will blink 5 times. Previously
LED_0 has been blining 6 times while others 5 times.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
If the first name is longer than HELLO_MAX sending would fail due to
there not being sufficient MIC space (or worse overrun the net_buf).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This code was still incorrectly causing corrupt strings to be
generated. Now it should be correct.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Inverse logic for onoff state while driving LED GPIO. For LED light on
GPIO pin is 0, 1 for LED light off.
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@codecoup.pl>
The show_sensors_data() function tries to access val[2] when
outputting the Z-axis value, so the array must have at least three
elements. This also triggered Coverity CID 189741.
Fixes#11482
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This comparison was always supposed to be > rather than >=. Fixing
this also fixes Coverity CID 189740.
Fixes#11483
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Patch introduces sensor model to mesh badge application. Along with
model definition a sensor get message is implemented and handled on
server.
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@codecoup.pl>
Kumar Gala