The driver should not request any more bytes if it expects no empty
space in the FIFO. So fix the bail out condition to (<= 0) instead of
(< 0).
Change-Id: Ie16faf1da7df678fc8ab5af7ab33d7c0a2cdba7d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Added line for JIRA key in the commit message and a note about
the JIRA key.
Change-Id: I8b447d42a592a1ba88a1cc476fbb563365a4316f
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
contribution guide is now a top level document and other guides
are being moved to the wiki.
Change-Id: I1e207e18659f3aa98111cfaa1597478ff29eedef
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For memory-constrained platforms (like the Arduino 101) it's desirable
to be able to build a slimmed-down shell app that doesn't contain any
unnecessary features. This patch makes more of them optional.
Change-Id: Ia7f2cc0930dda6dfed5ce020b56913c6e0bc3d6f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way when BLUETOOTH_DEBUG has been disabled we don't need to make
extra #ifdefs in application code to make it build without debug
support.
Change-Id: Iceabe0d700d571afae8b85c2c559ba372a883682
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some controllers will emit an initial "NOP" Command Complete event
during initialization and expect the host to only send commands once
this event has been received. This patch adds a new Kconfig option to
be used in the case of such controllers and defaults this to true on
Arduino 101 with the H:4 driver where this behavior is currently
observed.
Change-Id: I440f14a7c07ac27545febf9f85ebcc343e2a4558
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the buf ref count is already 0 meaning that it is freed,
then do not continue but return.
Change-Id: I6c7e15d48b988fda34af43971c1638fb386100c4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The number of free bufs is just that, no need to +1 it here.
Change-Id: I82549d33b00bd2f421babd10442f4d4a9ad9551b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure the number of free bufs will never go over the
allocated limit. This is only used for debugging when printing
the free buf count so this is not very serious issue.
Change-Id: Icb5e34e969cbf07280c24966659addcf32829f7c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add ip_buf_ref() helper that helps to track the calls to
net_buf refcounting in IP stack.
Change-Id: Ie5f5a5d57b6ffcb20df4fbc9f25c6c73a99589df
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The legacy nullrdc driver is not meant to be power efficient, and
supports requesting ACK on all packets. However, it's logic was based on
former Radio API which let it to read packet synchronously. That's not
working anymore as the new cc2520 driver does not support any
synchronous packet reception.
Thus a new driver, simplerdc, is provided. It supports the same features
as nullrdc, is of course not power efficient and fits properly with
the new driver.
- simplerdc is selected by default.
- to enable ack request on all packet, Kconfig proposes a
NETWORKING_WITH_15_4_ALWAYS_ACK option.
- simplerdc retransmissions is set to 3, as for nullrdc
Change-Id: I53880fcce5ce00f53831eaeb15d51329121314ec
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
zperf is a network traffic generator for Zephyr.
Same application is able to work dynamically in client or server mode.
It allows to assess network bandwidth.
zperf is compliant with iperf_2.0.5.
zperf can be run in micro or nano kernel.
Change-Id: Icbd69e1ad56ad29c678b098e7a2e07c44f90e48e
Signed-off-by: jgarcia <jeremie.garcia@intel.com>
Currently, the /CS pin is deasserted by _spi_config_cs() and
the pinmux driver sets it as an input afterwards. Later, setting
the /CS pin to an output via pinmux_dev asserts it.
Setting the SPI port 1 pins in the pinmux driver saves a few lines
of code. Moving the SPI init after pinmux init keeps the /CS pin as
configured by the SPI driver.
Change-Id: I4c587ba0a6983cd89dfb5ecedb2914335e86313b
Signed-off-by: Vlad Lungu <vlad.lungu@windriver.com>
Some sample applications are using file naming .config which are
inconsistent from others. Changed them to .conf.
Change-Id: I2ea3944f3809671d4c6f4782dbf77fe9c2a22864
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add driver for the TMP007 intrared thermopile sensor which measures
the temperature of an object without direct contact.
Datasheet:
http://www.ti.com/lit/ds/symlink/tmp007.pdf
Origin: Original
Change-Id: I29857b2e424a2144370d75e2ee40c4ff8b619afd
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
GDB server needs ownership of some exceptions to display information when
taking a fatal exception (DIVIDE_ERROR, PAGE_FAULT).
Introduce a Kconfig option that can work for any debugger.
Change-Id: I39aef22a820543a7fe9ac333b487592946abc0f3
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The GDB server implements a set of GDB commands, such as read/write
memory, read/write registers, connect/detach, breakpoints, single-step,
continue. It is not OS-aware, and thus provides a 'system-level'
debugging environment, where the system stops when debugging (such as
handling a breakpoint or single-stepping).
It currently only works over a serial line, taking over the
uart_console. If target code prints over the console, the GDB server
intecepts them and does not send the characters directly over the serial
line, but rather wraps them in a packet handled by the GDB client.
Change-Id: Ic4b82e81b5a575831c01af7b476767234fbf74f7
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Introduce an x86 interrupt stack frame that contains more information
than the non-debug one, namely the caller-saved GPRs, as well as an API
to retrieve it. Able to handle nested interrupts stack frames.
Change-Id: If182aaa2f34e4714b16ca65ff79da63b72d962f7
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Allow a debug server such a GDB to take control when a fatal error
occurs. The debug server simply has to define a _debug_fatal_hook()
function that will override the weak function installed by default.
Change-Id: Ib9dca5755868f747b697fa3178e09109f1eedb07
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
A debug server might want to redirect outgoing characters on the console
to another output if it piggybacks on the serial line normally reserved
for the console.
Change-Id: I534f5b35456306940a3926f52fe5cce2d5c94da4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Quark flash sub-driver. It is based on the QMSI driver.
In order to enable this driver, the following options
must be set.
CONFIG_QMSI_DRIVERS
CONFIG_QMSI_INSTALL_PATH
CONFIG_FLASH
CONFIG_SOC_FLASH_QMSI
Origin: Original
Change-Id: Iffbea3b17624c755e367677b76d7216c2fba2ca1
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Adding documentation for building, flashing, and debugging the Quark
D2000 series CRB.
Change-Id: I3d61d5c8b88b5f74da76262d4fcda823c6f7b9b3
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
- Consolidates the links to the sections in a single table of contents.
- Adds the documentation's version number.
- Adds a link to the project's Wiki.
Change-Id: I762d30ce8cbf518df8a28e428e94a2f9a3c7085d
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
The communication section is being removed.
The content will be available elswhere.
Change-Id: Idca52a7d3bc2f0607f108d639e2edf931bf99ffd
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
The documentation collaboration section is being removed.
It will be included elsewhere.
Change-Id: Ia669a48df37996572c95e71827d69f4faba5a232
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Since device_get_binding() will not return any reference to
a driver instance if port->driver_api is NULL and grove_lcd
does not have any API struct, just populate it with some
magic number so grove_lcd can be referenced.
Change-Id: I16bdd13dfb49c54b5bdff34c4a4124af229aa20c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
DEV_* error codes are being deprecated so hide them from
public documentation, to prevent mis-use.
Change-Id: Iee2f59502c9470c14ddf2fb1ed19b3526609e43b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Doxygen complained about "Unsupported xml/html tag <user> found".
Make the correct indentation to signify a code block, since it is
indeed a code block. This gets rid of the warning.
Change-Id: I78ea7709f1d45b2ff48c86153151d4f71a41d1e3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Doxygen complained about @defgroup not closing. Fix it by moving
code around, as doxygen was confused by all the #ifdef-#endif.
Change-Id: Iacc2e983cc82b0dfcaaea423ff64bdcc4db8577f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The dir/file names in .gitignore are relatively to the root
of the git tree, so amend it.
Change-Id: I532b3fae4f66590fb34555dd8407576f1e27f744
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The @file tag should follow by a file (or nothing for current file),
instead of file description. Fix it by separating the description.
Change-Id: I1944b164ebe420fbdc03fc65b314ac53493a5d2c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Daniel Leung