This callback is needed to successfully perform write operation.
Change-Id: I09776dda16dac639320a7e83a66e7a9b31ebea6a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
conn object pointer has to be passed to the write callback instead
on NULL pointer.
Change-Id: Ifde88be0a43bcd9e1acbe11b16512776cd18fc66
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
If attribute has no write callback, BT_ATT_ERR_WRITE_NOT_PERMITTED
error shall be returned.
Change-Id: I9277f8682597ee7f93a1267d2de31b3cc245f1cd
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
- CONFIG_GPIO_DW_0_BITS is not longer available
- Use default printk
- Do not enable debug
- remove useless whitelist in testcase.ini, we already whitelist
boards
Change-Id: If21795d544e268c26a757b697ce3c9f2e56db65f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
sys_slist_insert can be used to insert a node in the middle of the list
which previously was not possible with sys_slist_append and
sys_slist_prepend.
Change-Id: Ib9e319469cd4911adf7ddf49c54c3f7390c4c953
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
* service include macro definition takes reference to
first service attribute of the included service
Change-Id: Ib2b1defe2c99aea738da791af74a534d56025eae
Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com>
Enabling individual I2C controller is done in the SoC kconfig defaults.
There is no need to do that in the board defaults.
Change-Id: I45a62d8bc96a5f42b3fd613f5890bcdf04c92032
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
None of the configuration directives for any of the arches were
actually needed.
Change-Id: Id0bf7393b8e2c7e0f5188c50c13d7666cdfcd114
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This no longer defaults to X86 and instead throws an error if a
supported arch isn't found. Output format now checks CONFIG_ARM
instead of Cortex M3, should be the same for all ARM chips.
Change-Id: Ib9bf07ad93a44b3f7cdac7b52432110776eb23fd
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These C variants of atomic operations can work on any arch,
have platforms select them if they don't have ASM equivalents.
Change-Id: I38eb03bb58beff865681ee56ef7bc0fcded1e906
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The arch names and the directories are the same, make it so we
don't have to keep appending stuff to this file as new arches
are defined.
Change-Id: I640526f5cb83fe34f5af14b62e5d06295a4912b0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Directory layout per SDK 0.8 structure. Using toplevel libs for
now.
Change-Id: I7852a9def09fb0a5f0a6e496249d2ebb86720d8f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix typos and wrap text to 80 characters.
Change-Id: I25228c1d63ad391c734be601ed1503f42b4f2468
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
-EIO is an error code for operationnal error, not about invalid
argument.
Change-Id: I7064eaf01c6040d2e93ed43df3932d8baed1256e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add debug for bt_gatt_notify() and print parameters in
on_nble_gap_conn_update_evt().
Change-Id: I5b61b5dbf508a2ee8e0b79c8636bc2dc710fb2ef
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Since the header was updated type cast is not needed.
Change-Id: I6a232cd8515fb48ef2a0d16cc064effac7b80bfd
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
For some reason the HCI init procedure doesn't complete on the Arduino
101 using the MyNewt HCI firmware if we send HCI_LE_Random commands
too quickly (which probably is crashing the nRF51 RNG, or something
similar). Adding just a tiny delay makes the init complete reliably.
Change-Id: Ic87a965b0e5cb265a2bee09e23d337d741527773
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move development instructions to a separate file to make way for a
more high-level description of the stack. Also add more high-level
text to the main Bluetooth file.
Change-Id: Ic14ef62e6f5f602797b61df8584860dfac575489
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix grammatical errors and try to make the language flow a bit better.
Change-Id: I76b9dd2c88c087a6e4ae49788388a1ec4d198496
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch removes DEV_* codes from device.h since they are not used
anymore. All APIs now use error codes from errno.h, following the
conventions from doc/collaboration/code/error_code_conventions.rst.
Change-Id: Ifc363ec8d3d5aa108eaef49d9283b67dcae69ce5
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Documented the Power Management subsystem which includes the
power management hook interface, device power management,
device busy status interfac and other APIs. Also included
is a guide to writing Power Management applications.
This has 2 parts. One is the general description of the
infrastructure and the PMA writing guide which goes in the
'subsystem' area. Other is the API description that gets
automatically pulled in from the comments in the source files.
The API description goes into the section where all other
Zephyr APIs are put.
Change-Id: Id630209b23f931a8fcccb6f59428610298486743
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
The file device.c uses errno codes so it should include errno.h.
Change-Id: I93e806a9b20b2c9bcb245ac5e86fba70486c9591
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
The files soc_config.c and soc_gpio.c use errno code so they should
include errno.h.
Change-Id: I94237aa294701cc71ed17ea42eca9d8073d4ae47
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
The pinmux_stm32 and pinmux_dev_stm32 drivers use errno codes so they
should include errno.h.
Change-Id: I3fd19b338d5525f44207e8c770285ef218dd27a2
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
DEV_* error codes are deprecated and should not be used anymore. This
patch replaces DEV_* occurrences by the corresponding errno.h code,
according to the error code conventions.
Change-Id: I2f38c869b4e00d22145e24375796ba6bf216b084
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
DEV_* error codes are deprecated and should not be used anymore. This
patch replaces DEV_* occurrences by the corresponding errno.h code,
according to the error code conventions.
Change-Id: I7b098a6107c390b46ed15aaeb9141627e9502727
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Refactor all sensor drivers so that they use SYS_LOG instead of
decentralized systems/functions.
Change-Id: Ibd9443e06004341bc5e9afaf5b49bbec547e073d
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Split driver for LSM9DS0 gyroscope in core functionalities and trigger.
Change-Id: I19736b65f45a6c4fc79a1f16423097b89accff24
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Split BMC150 magnetometer driver in core functionalities and trigger.
Change-Id: I955ac39c2e995a81fa830776da9c0bcc38d9490a
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Add device driver for the multi function device (MFD) part of LSM9DS0:
accelerometer, magnetometer and temperature.
Datasheet:
https://www.adafruit.com/datasheets/LSM9DS0.pdf
Change-Id: I00b9db2c69c6e5229269afacb02bf5f921edabe9
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Runtime configurable attributes are now matched with the smallest
available value that is greater or equal to the parameter instead of
returning -EINVAL.
Change-Id: I9ca8e2eba443fcd247c329c6ce71dc2167fb7f03
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Rename sensor_value_type enums from SENSOR_TYPE_* to more concludent
name SENSOR_VALUE_TYPE_*. This change is required if we want to
introduce SENSOR_TYPE_* (SENSOR_TYPE_ACCEL - if the sensor/driver
supports accelerometer, SENSOR_TYPE_MAGN - etc.) in the future.
Also it is more clear with this notation what these enums are referring
to.
Change-Id: Ic58e29288669e10c0695e0f86f59b0e57f7ac38c
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Now you can specify the sensor type you want to fetch using
sensor_sample_fetch_chan. This will inform the driver that you want only
one type of data updated, leaving the others unchanged and enabling
different sampling rates for multi function devices (MFDs).
Change-Id: I403e422dffadc697c19a5372ed55ed8f486a2607
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Mariusz Skamra