- When flashing with dfu-util while alt is not a number, the name must
be quoted.
- Add missing commas in self.list_pattern
- Always call dfu-util with the VID/PID
Fixes: 257fa4af9 ("scripts: zephyr_flash_debug: flash like dfuutil.sh")
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
All commands need to have quotation marks stripped.
Fixes: bee6f9e73 ("scripts: zephyr_flash_debug: flash like openocd.sh")
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Add support for flashing targets compatible with esp32.sh.
Only tested by comparing commands that would be run.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Add support for flashing targets compatible with bossa-flash.sh.
This is something of a bug-for-bug reimplementation, as the existing
flashing script makes some potentially unsafe assumptions.
Only tested by comparing commands that would be run.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Add support for flashing targets compatible with pyocd.sh.
Tested on 96b_nitrogen, nrf52_blenano2, and frdm_k64f, with and
without PYOCD_BOARD_ID. Additionally, frdm_k64f was tested with
PYOCD_DAPARG_ARG='limit_packets=True'.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Zephyr board flashing and debugging is done via shell scripts. It
would improve the CMake transition to remove the shell dependency.
Add zephyr_flash_debug.py to allow phasing out the shell scripts.
This takes two arguments:
- a command (eventually flash, debug, and debugserver, but just flash
for now)
- the path to the corresponding shell script
zephyr_flash_debug.py runs the command in pure Python if it
knows how. Otherwise, it falls back on the shell script. In
this patch, it always falls back. Subsequent patches add support
for existing flash backends.
Invoke zephyr_flash_debug.py from the Makefile flash target, but only
if USE_ZEPHYR_FLASH_DEBUG_SHELL is empty. This lets users keep existing
behavior in case of issues, and can be removed later once the Python
script is more widely tested.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
pyocd occasionally throws USB timeout exceptions when running in
VirtualBox, and recently added a command-line option to limit the USB
packet count as a workaround. Introduce an environment variable
PYOCD_DAPARG so Zephyr can pass the argument to pyocd. For example:
$ make BOARD=frdm_k64f PYOCD_DAPARG='limit_packets=True' flash
This workound comes with a performance penalty when flashing and
debugging with pyocd, so it should only be used when running pyocd in
VirtualBox.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The JLinkGDBServer was printing log messages that messed with debugging
in -tui mode. Run it in silent mode instead.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
If we have more than one board of a given type we need to be able to
specify the board_id to select which specific board that the pyocd
command should target. Introduce an environment variable PYOCD_BOARD_ID
to we can set that will get passed to the pyocd command that needs it.
Here's an example:
$ make -C samples/hello_world/ BOARD=frdm_k64f flash PYOCD_BOARD_ID=1234
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We define a variable to pickup a default for the bossa binary, however
we weren't using it. Lets do so now.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This flashes Zephyr at 0x1000: that's where the first stage bootloader,
part of the ESP32 ROM, expects to find an "image header".
The second-stage bootloader, part of ESP-IDF, isn't used by the Zephyr
port. However, the bootloader can be used if desired; please refer to
the ESP-IDF documentation on how to set up partitions tables and use
the bootloader.
The following environment variables will affect the ESP32 flashing
process:
Variable Default value
ESP_DEVICE /dev/ttyUSB0
ESP_BAUD_RATE 921600
ESP_FLASH_SIZE detect
ESP_FLASH_FREQ 40m
ESP_FLASH_MODE dio
ESP_TOOL espidf
It's impossible to determine which serial port the ESP32 board is
connected to, as it uses a generic RS232-USB converter. The default of
/dev/ttyUSB0 is provided as that's often the assigned name on a Linux
machine without any other such converters.
The baud rate of 921600bps is recommended. If experiencing issues when
flashing, try halving the value a few times (460800, 230400, 115200,
etc). It might be necessary to change the flash frequency or the flash
mode; please refer to the esptool documentation for guidance on these
settings.
If ${ESP_TOOL} is set to "espidf", the esptool.py script found within
ESP-IDF will be used. Otherwise, this variable is handled as a path to
the tool.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Here are the main changes:
* board: Update EMSK onboard resources such as Button, Switch and LEDs
+ update soc.h for em7d, em9d, em11d
+ update board.h for em_starterkit board
* arc: Add floating point support and code density support
+ add kconfig configuration
+ add compiler options
+ add register definitions, marcos, assembly codes
+ fixes in existing codes and configurations.
* arc: Update detailed board configurations for cores of emsk 2.3
* script: Provide arc_debugger.sh for debugging em_starterkit board
+ make BOARD=em_starterkit debug
This will start openocd server for emsk, and arc gdb will connect
to this debug server, user can run `continue` command if user just
want to run the application, or other commands if debugging needed.
+ make BOARD=em_starterkit debugserver
This will start an openocd debugger server for emsk, and user can
connect to this debugserver using arc gdb and do what they want to.
+ make BOARD=em_starterkit flash
This will download the zephyr application elf file to emsk,
and run it.
Signed-off-by: Huaqi Fang <huaqi.fang@synopsys.com>
Adds a new debug support script using pyOCD and configures most NXP
boards so they can use it. frdm_kw41z is the one exception because pyOCD
doesn't yet support kw41z. Tested with pyOCD v0.8.0 and the latest
DAPLink firmware for each board.
Introduces two new environment variables, PYOCD_FLASHTOOL and
PYOCD_GDBSERVER, that allow you to set custom paths to the pyOCD tools.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a new debug support script using Segger JLink and configures all
NXP boards so they can use it. Tested with Segger JLink GDB server
V6.14b and OpenSDA v2.1 firmware.
Change-Id: Ia1b297d9c93d21db61379e22f27ae54cda3ad461
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Currently running "make V=1 flash/debug" does not result in the caller
discovering what commands are run to perform the action because make
calls into an opaque script (which then makes complex invokations of
both openocd and gdb). Make the script more transparent by conditionally
enabling enabling tracing within the script.
We also remove the "Done flashing" message. It is pointless because
openocd has already *told* us it has done flashing ["wrote 16384 bytes
from file .../zephyr.elf in 0.802135s (19.947 KiB/s)"]. It is also
potentially misleading since it tells us we are "Done flashing" even
when we failed to flash anything which risks misleading someone
unfamiliar with openocd.
Change-Id: Icaea28c4b00ac10965726dd4502162b7de080953
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Initial assumption with Arduino 101 was that the "alternate setting
name of the DFU interface" would be simple enough to be used as the
grep pattern when attempting to find the board in DFU mode.
However, for boards such as the 96Boards Carbon, this name includes
grep meta-characters, so the DFUUTIL_ALT environment variable is
provided as a numeric value, instead of the previously expected name
string.
In order to avoid false positives, we now check whether DFUUTIL_ALT
is a numeric value, and the grep pattern is adjusted accordingly to
search for either "alt=" or "name=".
Also take into account that the name might contain spaces.
Change-Id: I81351d03bd727b35093fd1280e2b8b6904f3c89b
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
OPENOCD_PRE_CMD, OPENOCD_POST_CMD variables require adding
'-c' in front of an actual OpenOCD command. This is in contrary
to other OPENOCD_*_CMD varialbles which specify OpenOCD commands
directly. This patch aligns usage of various OPENOCD_*_CMD variables.
It is no longer required to add '-c' in front of OPENOCD_PRE_CMD,
OPENOCD_POST_CMD variables.
Change-Id: I276fab00b099694c83c3bf74aa5dd59c8d6a308b
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Add DFUUTIL_DFUSE_ADDR to the list of dfu-util environment variables,
which can be used to flash DfuSe devices (e.g. STM32 based MCUs).
Change-Id: I39fdc338f7f034376ce50b648b06f39fee3169a7
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Tested on nrf52_pca10040 and nrf51_pca10028 using hello_world sample.
Change-Id: I7cdf1d21e7f8232da737a06e5afbfb1eaec05cde
Signed-off-by: Michał Kruszewski <mkru1992@gmail.com>
At present 'make flash' target for boards that support flashing with
OpenOCD works only with Zephyr SDK. This patch enables flashing
without Zephyr SDK as long as openocd itself is installed.
Change-Id: I4594d795225e54b7638839d590e4c0620f9ca88c
Jira: ZEP-1893
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Flashing the Arduino 101 board over DFU can be tricky: the
dfu-util command line is cumbersome, and the reset button
must be pressed at the right time.
This script brings the convenience of 'make flash' for the
Arduino 101 board and for other boards that support the DFU
protocol. It checks whether the board is in DFU mode, and
prompts the user to reset it when needed.
The dfu-util command line is constructed from the following
environment variables, to be exported from the Makefile:
- DFUUTIL: path to the dfu-util executable, default: dfu-util
- DFUUTIL_PID: vendor_ID:product_ID of the board in DFU mode
- DFUUTIL_ALT: alternate setting name of the DFU interface
- DFUUTIL_IMG: path to the binary image sent to the board
Change-Id: Ia9577ec96102a92d4c60481f980f30f4f6e7cd9e
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
This patch automates flashing process for arduino_due board. Just make flash will able
to flash binary file on the board.
Bossa tool(http://www.shumatech.com/web/products/bossa) manual flashing process is
automated through shell script and currently this binary is only available for
x86_64 architecture.
JIRA : ZEP-145
Change-Id: Ib7b525466239d0437e449c56827f8a9b3e5a96a1
Signed-off-by: Punit Vara <punit.vara@intel.com>
Use the existing debugserver target also for Qemu debugging. Qemu
should be maintained as one of many emulation/simulations platforms and
emulation should be abstracted in the Makefiles and not tied to Qemu.
qemugdb will still work, it is however being deprecated.
Change-Id: I0cd10fb66debb939b8f7f1304bf2ef4605da6a1d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce an architecture sorting of boards. This is to allow for
easier maintenance going forward as the number of boards grows. It
will be easier for any scripts to know the board/arch mapping without
having to maintain an explicit list of what boards are associated with
which arch. We can also do things like have architecture maintainers
cover reviews and branches for arch/${ARCH} and boards/${ARCH} going
forward.
Change-Id: I02e0a30292b31fad58fb5dfab2682ad1c5a7d5a7
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Flashing issues have been resolved. The build system support for
flashing and debugging has been changed back to UFM scenario.
XIP and reset vector no longer disabled. Wiki documentation updated.
Change-Id: Iffe326485c20808dabc1e19e0b18b7b60a83d797
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For both of these, we send the .elf binary over the JTAG and it gets
written directly into SRAM. The CPU boots the image from the entry
point (__start).
This does not provision the kernel onto device's User Flash Memory
(UFM). Implementation of this is still in progress see ZEP-273.
Change-Id: Iae8188a21e4a3eecfda0f4f0bb220c0607d719cb
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For the moment, NIOS2_CPU_SOF must be set with the path to the
CPU configuration. We are checking with Altera on whether we
can directly check in the binary to the source tree.
These scripts depend on tools provided by the Altera Quartus
Prime Lite Edition. This is available for free but requires
registration on Altera's website to obtain.
Change-Id: Ia6cb6c9e43c3e141807a887cb25c47b370a7d8e9
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Using the latest SDK (0.7.2) you can flash directly using make
by specifying the board, for example
make BOARD=arduino_101 flash
This will build and flash the generated binary to the board.
Change-Id: I90254abd69874efbb449ef318079958980c23074
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Leandro Pereira