This commit adds the test application for the CMSIS-DSP 'complex math'
functions.
This test application is loosely based on the C++ test suite included
in the upstream CMSIS-DSP distribution.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the benchmark application for the CMSIS-DSP 'basic
math' functions.
This benchmark application is loosely based on the C++ test suite
included in the upstream CMSIS-DSP distribution.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the test application for the CMSIS-DSP 'basic math'
functions.
This test application is loosely based on the C++ test suite included
in the upstream CMSIS-DSP distribution.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit introduces the Kconfig configurations for the CMSIS-DSP
digital signal processing library.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Replace DT_CPU_CLOCK_FREQUENCY with a PATH based reference to cpu@0
(DT_PATH(cpus, cpu_0)) and than getting the clock_frequency property:
DT_CPU_CLOCK_FREQUENCY -> DT_PROP(DT_PATH(cpus, cpu_0), clock_frequency)
This lets us remove DT_CPU_CLOCK_FREQUENCY from dts_fixup.h
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Provide a description of the sample and how it works with different
power supply source configurations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When the system is powered directly a measurement of Vdd provides the
battery voltage. This requires a different ADC configuration and
level curve.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
User reported a flaw in the current algorithm which fails when Zero
Latency Interrupts (ZLI) are used. Ported algorithm from
counter_nrfx_rtc.c which covers all cases. Algorithm is lockless so
no distinction for ZLI is needed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Adding support for nRF9160 based InnBlue board V2.2. Supports both
Secure and Non-Secure configurations along with various sensors
(lis2dh12 / hts221) and devices(i2c / pwm).
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
This commit updates `west.yml` to point to the `hal_atmel` commit that
fixes the incorrect GMAC priority queue register offsets for SAMV71.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The original description for isr-ok allowed the function to return an
error if called from an interrupt context, rather than doing its job.
This led to complex descriptions like "isr-ok but not sleep" to
indicate that the function could be called from thread or interrupt
context without visible behavior changes, including returning an
error based on calling context.
Remove the special terminology for cases where a function returns an
error (rather than causing undefined behavior) when invoked from an
interrupt or pre-kernel. Redefine isr-ok to indicate that the call
does what it's supposed to do regardless of interrupt or thread
context, delegating the description of allowed behaviors to the API
documentation (which should explicitly note when it's allowed to fail
to perform in non-thread context).
This also makes more clear that isr-ok applies to functions regardless
of whether they can cause an invoking thread to context switch.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
To obtain lower power measurements in general, we should turn off the
external flash which is on by default at boot.
Code is modeled based on examples shipped in the TI SimpleLink SDK.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Adding an example that exercises the sleep modes, then powers off the
system by going into deep sleep.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Set the default value of SYS_PM_MIN_RESIDENCY_SLEEP_1 and
SYS_PM_MIN_RESIDENCY_SLEEP_2 to something more reasonable for these
platforms, as the latency of entering/exiting these sleep modes
is low.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
In order for IO pins to work correctly after waking up from shutdown
mode, we need to unlatch them given they were automatically latched
when Power_shutdown() was invoked.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Add I2C1 SDA/SCL configuration on pins PA9 and PA10, as they are
currently only available on other pins.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The nvs sample requires a storage_partition of 3 flash pages, but these
boards only provided 2 flash pages. Because of this the nvs sample
failed.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
The driver was extended so that the tests/drivers/uart/uart_basic_api
test case now passes. The following modifications were made for the
following items of the test case:
* test_uart_configure
* test_uart_config_get
The driver was missing the support to re-configure the UART at run-time
as well as to obtain the current configuration at run-time via the
.configure and .config_get hooks provided within the UART driver API.
For the flow control setting, bit (mask) definitions were added for the
Modem Control Register. Both the configuration get and set functions
come with auxiliary functions that convert configuration register bit
masks to the UART driver API's enumeration types and vice versa.
For run-time configurability, the device's data struct is required un-
conditionally, previously, it was only available whenever interrupt-
driven mode was enabled. Consequently, the device initialization was
simplified to a single call of the DEVICE_AND_API_INIT macro, as the
existance of the device's data struct is now no longer conditional.
* test_uart_fifo_fill
For the user callback function of the test case to receive the initial
'Ready to TX' indication upon which the TX FIFO is filled, it is
necessary that uart_xlnx_ps_irq_tx_enable also sets the TX FIFO empty
bit in the Interrupt Enable Register. Consequently, the same modifi-
cation applies to the irq_tx_disable function.
* test_uart_fifo_read
During inital device configuration, the RX FIFO interrupt trigger
level has to be set to 1 byte for now, as the test case doesn't poll
the incoming data in a while()-loop, therefore, it misses the CR/LF
if more than one character is in the RX FIFO at the time of the
interrupt and neither CR nor LF is the first character.
Whenever the state of an interrupt is checked by the user callback
function (uart_xlnx_ps_irq_tx_ready, uart_xlnx_ps_irq_rx_ready),
the corresponding bits are cleared in the Interrupt Status Register,
re-enabling interrupts generated by the corresponding source.
Tested on QEMU (R5, A9) and actual Zynq7000 hardware.
Signed-off-by: Immo Birnbaum <Immo.Birnbaum@weidmueller.com>
Added the SERIAL_SUPPORT_INTERRUPT feature flag to the driver's
configuration file. This flag was missing, although the driver
supports interrupt-driven operation.
Interrupt support is required for testcases using the UART_PIPE
feature on the upcoming Cortex-A9 targets (QEMU/Zynq-7000).
Signed-off-by: Immo Birnbaum <Immo.Birnbaum@weidmueller.com>
Fix for the UART_XLNX_PS_IRQ_CONF_FUNC macro, which wraps IRQ_CONNECT
into a function for each device instance. This macro had device
instance #0 hardcoded at one point.
Interrupt support is required for test cases using the UART_PIPE
feature on the upcoming Cortex-A9 targets (QEMU/Zynq-7000).
Signed-off-by: Immo Birnbaum <Immo.Birnbaum@weidmueller.com>
Add script signing and flashing up_squared_adsp board. Can be used:
$ west flash \
<zephyr>/boards/xtensa/up_squared_adsp/tools/up_squared_adsp_flash.sh
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Internal macros like _LOG_XXXX0 use preprocessor ## and LOG_LEVEL_N
to conditionally generate code.
After addition of U suffixes to LOG_LEVEL_N macros the internal macros
also need update to versions with suffix i.e. _LOG_XXXX0U
Signed-off-by: Artur Lipowski <artur.lipowski@hidglobal.com>
Static analyzer (clang-tidy) complains about using signed integer
operand with a binary bitwise operator in LOG_XYZ macros.
Signed-off-by: Artur Lipowski <artur.lipowski@hidglobal.com>
The test of the absolute timeout feature was a simple whitebox test
that inspected the generated ticks field of different constructors for
identity. But it wasn't simple enough, because it was doing a
ticks->ms->ticks conversion (at compile time, sigh) on the input data,
which is obviously lossy on platforms where ticks are shorter than
milliseconds by non-integral factors.
Fix to do the conversion in just one direction.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This test sets a timer, busy waits for half the duration, and then
checks the remaining time is correct. And it correctly does all its
math in tick precision and aligns to a timer interrupt to eliminate
aliasing due to the tick stride.
But it's waiting using k_busy_wait(), not a timer: "half the duration"
in MICROSECONDS (for k_busy_wait()) is not necessarily representable
as an integer number of TICKS on all platforms. Because k_busy_wait()
always rounds up, we need one extra tick of buffer on those platforms.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Following the practice for i.MX decoding assume the 32-bit identifier
values need to be converted to big-endian representation for
device-independent interpretation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Resources indicate that CFG2 holds the upper 32 bits, and CFG1 the
lower 32 bits, of a 64-bit unique identifier. Store it in big-endian
format so it reads correctly when accessed as a byte sequence.
https://community.nxp.com/docs/DOC-94459
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Fixes: #24576
The name of the symbolic link would be constructed using the full path
name to the target folder.
This is not needed and caused the issue raised in #24576.
This has been fixed by no longer using the toplevel target directory
in the link name, for example:
Old style: _project_zephyr_workspace_zephyr_include_sys
New style: include_sys
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The previous architecture proved unable to support user expectations,
so the API has been rebuilt from first principles. Backward
compatibility cannot be maintained for this change.
Key changes include:
* Formerly the service-provided transition functions were allowed to
sleep, and the manager took care to not invoke them from ISR
context, instead returning an error if unable to initiate a
transition. In the new architecture transition functions are
required to work regardless of calling context: it is the service's
responsibility to guarantee the transition will proceed even if it
needs to be transferred to a thread. This eliminates state machine
complexities related to calling context.
* Constants identifying the visible state of the manager are exposed
to clients through both notification callbacks and a new monitor API
that allows clients to be notified of all state changes.
* Formerly the release operation was async, and would be delayed for the
last release to ensure a client would exist to be notified of any
failures. It is now synchronous.
* Formerly the cancel operation would fail on the last client associated
with a transition. The cancel operation is now synchronous.
* A helper function is provided to safely synchronously release a
request regardless of whether it has completed or is in progress,
satisfying the use case underlying #22974.
* The user-data parameter to asynchronous notification callbacks has
been removed as user data can be retrieved from the CONTAINER_OF
the client data.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The DT_I2S_* defines can be removed as the driver is now utilizing the
new dt macros that don't require these defines.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit renames `samd.dtsi` to `samd2x.dtsi` since this DTS header
is specific to the SAM D2x series and its derivatives (e.g. SAM R21).
Note that the SAM D5x series uses a different DTS header file (i.e.
`samd5x.dtsi`) due to the vast differences, and the future SAM D1x will
have to use a separate DTS header to be sensible anyway.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
In some cases (eg at high baud rate, no HW flow control, and when BLE
radio/ints running) data could be lost between when enough characters
have been RX'd to fill the DMA buffer and when the ENDRX event was
fired, where the the STARTRX task is invoked to start filling the next
buffer (which is set up earlier, but I think will not be filled until
STARTRX).
To fix this, the SHORT is enabled between ENDRX and STARTRX whenever the
'next' buffer is available, so that STARTRX is invoked automatically and
subsequent chars go into the next buffer via EasyDMA.
To make this work properly, uarte_nrfx_isr_async() now handles the ENDRX
event _before_ the STARTRX event.
There was also an issue in rx_timeout() where the received character
count (rx_total_byte_count) could be incremented greater than the actual
buffer size. This arises from rx_total_byte_count value coming from the
counting the RXDRDY events (either by PPI/timer counter or counting the
RXDRDY ints themselves) and so if chars are received in the rx_timeout()
(or before ENDRX is handled) the rx_timeout() could increment rx_offset
past the length of the buffer. This could result the remaining 'len'
being calculated incorrectly (an underflow due to unsigned - signed ,
where signed > unsigned).
To fix this, we now store the lengths of the buffers and don't invoke
the UART_RX_RDY callback when the buffers are full; its handled by
ENDRX.
(Also note that the buffer size should be available via the RXD.MAXCNT
register on the nrf, but this register is not exposed through the nrfx
HAL and is also double buffered, so it seemed clearer to just track the
buffer lengths explicitly here in the driver).
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
for fixup
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
This patch fixes an issue with TCP options reading. Previous approach
was accessing the options with pointers (th + 1). This does not work if
TCP options span multiple net_pkt buffer fragments. Instead net_pkt
functions must be used.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Convert driver to use new DT_INST macros throughout. This allows us to
also remove dts_fixup.h that are no longer used.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace macros of the form DT_CAVS_ICTL_x_IRQ with new dt form macro
DT_IRQN(DT_INST(x, intel_cavs_intc))
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace various drivers and soc code that use DT_CAVS_ICTL_BASE_ADDR
with DT_REG_ADDR(DT_NODELABEL(cavs0)).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The ARM GCC `-march` compiler flag is completely redundant when the
`-mcpu` flag is specified, since the `-mcpu` selects the target ARM
architecture as well as CPU-specific optimisations.
In fact, it is disadvantageous to specify both `-march` and `-mcpu`
flags because the `-march` flag overrides and disables any CPU-specific
optimisations enabled by the `-mcpu` flag.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This operation is formally defined as rounding down a potential
stack pointer value to meet CPU and ABI requirments.
This was previously defined ad-hoc as STACK_ROUND_DOWN().
A new architecture constant ARCH_STACK_PTR_ALIGN is added.
Z_STACK_PTR_ALIGN() is defined in terms of it. This used to
be inconsistently specified as STACK_ALIGN or STACK_PTR_ALIGN;
in the latter case, STACK_ALIGN meant something else, typically
a required alignment for the base of a stack buffer.
STACK_ROUND_UP() only used in practice by Risc-V, delete
elsewhere.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Stephanos Ioannidis