OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity

doc: release-notes-3.6: STM32 changes 

Update V3.6.0 release notes with STM32 related changes

Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
This commit is contained in:
Erwan Gouriou 2024-02-13 12:11:15 +01:00 committed by Henrik Brix Andersen
parent 8016647dc6
commit fc92484ca8
1 changed files with 72 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

86
doc/releases/release-notes-3.6.rst
View File

@ -74,6 +74,11 @@ Boards & SoC Support
* Added support for these SoC series:
* Added support for Renesas R-Car Gen4 series
* Added support for STM32F303xB SoC variants
* Added support for STM32H7B0xx SoC variants
* Added support for STM32L010xx SoC variants
* Added support for STM32L081xx SoC variants
* Added support for STM32U5A9xx SoC variants
* Removed support for these SoC series:
@ -81,15 +86,21 @@ Boards & SoC Support
* Nordic SoCs now imply :kconfig:option:`CONFIG_XIP` instead of selecting it, this allows for
creating RAM-based applications by disabling it.
* BLE is now supported on STM32WBA series.
* Added support for these ARC boards:
* Added support for these ARM boards:
* Added support for Renesas R-Car Spider board CR52: ``rcar_spider_cr52``
* Added support for Adafruit QTPy RP2040 board: ``adafruit_qt_py_rp2040``
* Added support for FANKE FK7B0M1-VBT6 board: ``fk7b0m1_vbt6``
* Added support for Renesas R-Car Spider board CR52: ``rcar_spider_cr52``
* Added support for ST Nucleo F722ZE board: ``nucleo_f722ze``
* Added support for ST STM32H750B Discovery Kit: ``stm32h750b_dk``
* Added support for ST STM32L4R9I Discovery board: ``stm32l4r9i_disco``
* Added support for ST STM32U5A9J-DK discovery kit: ``stm32u5a9j_dk``
* Added support for ST Nucleo WBA55CG board: ``nucleo_wba55cg``
* Added support for ST STM32WB5MM-DK Discovery board: ``stm32wb5mm_dk``
* Added support for Wiznet W5500 Evaluation Pico board: ``w5500_evb_pico``
* Added support for ADI boards: ``adi_sdp_k1``, ``adi_eval_adin1110ebz``,
@ -212,6 +223,15 @@ Drivers and Sensors
* ADC
* Power Management for ADC is now supported on STM32 devices.
* STM32 ADC driver now supports mixing shared and separate IRQs (for instance on STM32G473
which has 5 ADCs, ADC1 and ADC2 share one IRQ while ADC3, ADC4 and ADC5 each have unique IRQs).
Enabling all instances in same application is not possible on such devices as of now.
* Battery backed up RAM
* STM32WL devices now support BBRAM.
* CAN
* Added system call :c:func:`can_get_mode()` for getting the current operation mode of a CAN
@ -249,6 +269,8 @@ Drivers and Sensors
* Renesas R-Car clock control driver now supports Gen4 SoCs
* Renamed ``CONFIG_CLOCK_CONTROL_RA`` to :kconfig:option:`CONFIG_CLOCK_CONTROL_RENESAS_RA`
* On STM32 devices, :dtcompatible:`st,stm32-hse-clock` now allows setting a ``css-enabled``
property which enables HSE clock security system (CSS).
* Counter
@ -256,18 +278,27 @@ Drivers and Sensors
* counter_native_posix driver: Added support for top value configuration, and a bugfix.
* Crypto
* STM32WB devices now support crypto API through AES block
* DAC
* Disk
* Display
* Introduce frame buffer config to STM32 LTDC driver.
* DMA
* STM32WBA Devices now support GPDMA
* Entropy
* The "native_posix" entropy driver now accepts a new command line option ``seed-random``.
When used, the random generator will be seeded from ``/dev/urandom``
* On STM32devices, RNG block is now suspended when pool is full to save power.
* Ethernet
@ -295,6 +326,7 @@ Drivers and Sensors
* ``spi_nor`` driver now sleeps between polls in ``spi_nor_wait_until_ready``. If this is not
desired (For example due to ROM constraints in a bootloader),
:kconfig:option:`CONFIG_SPI_NOR_SLEEP_WHILE_WAITING_UNTIL_READY` can be disabled.
* Flash readout protection configuration was added on STM32G4 and STM32L4 series.
* ``nordic_qspi_nor`` driver now supports user-configurable QSPI timeout with
:kconfig:option:`CONFIG_NORDIC_QSPI_NOR_TIMEOUT_MS`.
@ -306,8 +338,12 @@ Drivers and Sensors
* I2C
* :c:func:`i2c_get_config` is now supported on STM32 driver.
* I2S
* STM32H7 devices now support I2S.
* I3C
* The Legacy Virtual Register defines have been renamed from ``I3C_DCR_I2C_*``
@ -380,6 +416,8 @@ Drivers and Sensors
* Added driver for ZynqMP / Mercury XU
* Added driver for i.MX8QM/QXP
* Added driver for Renesas RZ/T2M
* On STM32 devices, pins assigned to JTAG/SW port can now be put to analog state when
:kconfig:option:`CONFIG_PM` enabled and :kconfig:option:`CONFIG_DEBUG` disabled.
* PWM
@ -397,6 +435,10 @@ Drivers and Sensors
* Atmel SAM: Added RTC driver.
* SMBUS:
* SMBUS is now supported on STM32 devices
* SDHC
* Sensor
@ -452,36 +494,40 @@ Drivers and Sensors
* Serial
* Added drivers to support UART on Renesas RA and RZ/T2M.
* Added support for higher baud rate for ITE IT8xxx2.
* Added driver to support Intel Lightweight UART.
* Added UART asynchronous RX helper.
* Added support for async API on NS16550 driver.
* Updated ``uart_esp32`` to use serial port configuration from devicetree.
* Added an adaptation API to provide interrupt driven API for drivers
which have only implemented async API.
* Emulated UART driver (:file:`drivers/serial/uart_emul.c`):
* Added emulated interrupt based TX.
* Added emulated error for testing.
* Modified to use local work queue for data transfer.
* Modified FIFO size and its handling to be more aligned with real hardware.
* On STM32 devices, it is now possible to enable FIFO by setting a ``fifo-enable``
property in targeted serial node, with the following benefits:
In TX, FIFO allows to work in burst mode, easing scheduling of loaded applications.
It also allows more reliable communication with UART devices sensitive to variation of inter-frames delays.
In RX, FIFO reduces overrun occurences.
* SPI
* On STM32H7 devices, ``fifo-enable`` property allows using SPI block FIFO. This
feature is still experimental and requires maturation.
* On STM32 devices impacted by BSY bit erratum, a workaround is implemented.
* Timer
* USB
* On STM2G0 devices, property ``crs-usb-sof`` in ``clk_hsi48`` node enables support
for Clock Recovery System allowing a more stable HSI48 clock and hence resilient USB
connection.
* On compatible STM32 devices, isochronous endpoint are now functional thanks to the
use of double buffering.
* Wi-Fi
* Added Infineon airoc driver.
@ -631,6 +677,8 @@ Libraries / Subsystems
* Power management
* Atmel SAM: introduced SUPC functions to allow wakeup sources and poweroff.
* STM32F4 devices now support stop mode thanks to the use of a RTC based idle timer which
keeps track of tick evolution while cortex systick is off.
* Random
@ -694,6 +742,16 @@ Libraries / Subsystems
HALs
****
* STM32
* stm32cube: updated STM32F1 to cube version V1.8.5.
* stm32cube: updated STM32F7 to cube version V1.17.1
* stm32cube: updated STM32H7 to cube version V1.11.1
* stm32cube: updated STM32L4 to cube version V1.18.0
* stm32cube: updated STM32U5 to cube version V1.4.0
* stm32cube: updated STM32WBA to cube version V1.2.0
* stm32cube: updated STM32WB to cube version V1.18.0
MCUboot
*******