From a4d9bb454572687047b118e1ce9a2cd090405b68 Mon Sep 17 00:00:00 2001 From: "McAtee Maxwell (CSS ICW SW MTO INT 2)" Date: Fri, 20 Sep 2024 16:31:53 +0000 Subject: [PATCH] Boards: cyw20829: Added jlink as potential runner for board - Add jlink as possible runner for cyw920829m2evk_02 platform in board.cmake file Signed-off-by: McAtee Maxwell (CSS ICW SW MTO INT 2) --- boards/infineon/cyw920829m2evk_02/board.cmake | 2 ++ boards/infineon/cyw920829m2evk_02/doc/index.rst | 5 +++++ soc/infineon/cat1b/cyw20829/Kconfig | 1 + 3 files changed, 8 insertions(+) diff --git a/boards/infineon/cyw920829m2evk_02/board.cmake b/boards/infineon/cyw920829m2evk_02/board.cmake index 9fa085b7448..0c9bf12801b 100644 --- a/boards/infineon/cyw920829m2evk_02/board.cmake +++ b/boards/infineon/cyw920829m2evk_02/board.cmake @@ -2,3 +2,5 @@ # SPDX-License-Identifier: Apache-2.0 include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake) +board_runner_args(jlink "--device=CYW20829_tm") +include (${ZEPHYR_BASE}/boards/common/jlink.board.cmake) diff --git a/boards/infineon/cyw920829m2evk_02/doc/index.rst b/boards/infineon/cyw920829m2evk_02/doc/index.rst index cac878c01a5..6c54aba4f25 100644 --- a/boards/infineon/cyw920829m2evk_02/doc/index.rst +++ b/boards/infineon/cyw920829m2evk_02/doc/index.rst @@ -97,6 +97,11 @@ Programming and Debugging The CYW920829M2EVK-02 includes an onboard programmer/debugger (`KitProg3`_) to provide debugging, flash programming, and serial communication over USB. Flash and debug commands use OpenOCD and require a custom Infineon OpenOCD version, that supports KitProg3, to be installed. +The CYW920829M2EVK-02 supports RTT via a SEGGER JLink device, under the target name cyw20829_tm. This can be enabled for an application by building with the rtt-console snippet or setting the following config values: CONFIG_UART_CONSOLE=n, CONFIG_RTT_CONSOLE=y, and CONFIG_USE_SEGGER_RTT=y. +e.g. west build -p always -b cyw920829m2evk_02 samples/basic/blinky -S rtt-console + +As an additional note there is currently a discrepancy in RAM address between SEGGER and the CYW920829M2EVK-02 device. So, for RTT control block, do not use "Auto Detection". Instead, set the search range to something reflecting: RAM RangeStart at 0x20000000 and RAM RangeSize of 0x3d000. + Infineon OpenOCD Installation ============================= diff --git a/soc/infineon/cat1b/cyw20829/Kconfig b/soc/infineon/cat1b/cyw20829/Kconfig index f00be4ba1b8..242a3569018 100644 --- a/soc/infineon/cat1b/cyw20829/Kconfig +++ b/soc/infineon/cat1b/cyw20829/Kconfig @@ -11,3 +11,4 @@ config SOC_SERIES_CYW20829 select CPU_CORTEX_M33 select CPU_HAS_FPU select DYNAMIC_INTERRUPTS + select HAS_SEGGER_RTT if ZEPHYR_SEGGER_MODULE