OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity

boards: arm: frdm_k64f: Add pinctrl dts properties 

Add pinctrl-0 properties for configuration of peripherals like UARTs,
I2C, SPI, FTMs, etc.  These settings are based on what is defined in
the board/pinmux.c file.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit is contained in:
Kumar Gala 2021-04-02 12:28:04 -05:00 committed by Kumar Gala
parent e9c69f9000
commit 9901871736
1 changed files with 27 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

27
boards/arm/frdm_k64f/frdm_k64f.dts
View File

@ -95,6 +95,7 @@
arduino_serial: &uart3 {
status = "okay";
current-speed = <115200>;
pinctrl-0 = <&UART3_RX_PTC16 &UART3_TX_PTC17>;
};
&cpu0 {
@ -120,6 +121,7 @@ arduino_serial: &uart3 {
arduino_i2c: &i2c0 {
status = "okay";
pinctrl-0 = <&I2C0_SCL_PTE24 &I2C0_SDA_PTE25>;
fxos8700@1d {
compatible = "nxp,fxos8700";
@ -132,23 +134,31 @@ arduino_i2c: &i2c0 {
arduino_spi: &spi0 {
status = "okay";
pinctrl-0 = <&SPI0_PCS0_PTD0 &SPI0_SCK_PTD1 &SPI0_SOUT_PTD2 &SPI0_SIN_PTD3>;
};
&ftm0 {
status = "okay";
compatible = "nxp,kinetis-ftm-pwm";
#pwm-cells = <3>;
pinctrl-0 = <&FTM0_CH0_PTC1>;
};
&ftm3 {
status = "okay";
compatible = "nxp,kinetis-ftm-pwm";
#pwm-cells = <3>;
pinctrl-0 = <&FTM3_CH4_PTC8 &FTM3_CH5_PTC9>;
};
&uart0 {
status = "okay";
current-speed = <115200>;
pinctrl-0 = <&UART0_RX_PTB16 &UART0_TX_PTB17>;
};
&uart2 {
pinctrl-0 = <&UART2_RTS_b_PTD0 &UART2_CTS_b_PTD1 &UART2_RX_PTD2 &UART2_TX_PTD3>;
};
&usbotg {
@ -217,16 +227,33 @@ arduino_spi: &spi0 {
&enet {
status = "okay";
pinctrl-0 = <&RMII0_RXER_PTA5 &RMII0_RXD1_PTA12
&RMII0_RXD0_PTA13 &RMII0_CRS_DV_PTA14
&RMII0_TXEN_PTA15 &RMII0_TXD0_PTA16
&RMII0_TXD1_PTA17 &RMII0_MDIO_PTB0
&RMII0_MDC_PTB1>;
ptp {
status = "okay";
pinctrl-0 = <&ENET0_1588_TMR0_PTC16 &ENET0_1588_TMR1_PTC17
&ENET0_1588_TMR2_PTC18>;
};
};
&RMII0_MDIO_PTB0 {
bias-pull-up;
drive-open-drain;
};
&flexcan0 {
status = "okay";
pinctrl-0 = <&CAN0_TX_PTB18 &CAN0_RX_PTB19>;
bus-speed = <125000>;
};
&CAN0_RX_PTB19 {
bias-pull-up;
};
&edma0 {
status = "okay";
};