include: add missing kernel.h include

Some files make use of Kernel APIs without including kernel.h, fix this
problem.

Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>

boards/arm/thingy52_nrf52832/board.c

@@ -6,6 +6,7 @@
 
 #include <zephyr/init.h>
 #include <zephyr/drivers/gpio.h>
+#include <zephyr/kernel.h>
 
 static const struct gpio_dt_spec ccs_gpio =
 	GPIO_DT_SPEC_GET(DT_NODELABEL(ccs_pwr), enable_gpios);

boards/arm/thingy53_nrf5340/board.c

@@ -5,8 +5,8 @@
  */
 
 #include <zephyr/device.h>
+#include <zephyr/kernel.h>
 #include <zephyr/logging/log.h>
-
 #include <soc.h>
 
 LOG_MODULE_REGISTER(thingy53_board_init);

drivers/clock_control/clock_control_lpc11u6x.c

@@ -8,6 +8,7 @@
 
 #include <zephyr/devicetree.h>
 #include <zephyr/device.h>
+#include <zephyr/kernel.h>
 
 #include <zephyr/drivers/clock_control/lpc11u6x_clock_control.h>
 

drivers/clock_control/clock_control_renesas_cpg_mssr.c

@@ -8,6 +8,7 @@
 #include <zephyr/drivers/clock_control/renesas_cpg_mssr.h>
 #include <zephyr/dt-bindings/clock/renesas_cpg_mssr.h>
 #include <zephyr/irq.h>
+#include <zephyr/kernel.h>
 #include "clock_control_renesas_cpg_mssr.h"
 
 static void rcar_cpg_reset(uint32_t base_address, uint32_t reg, uint32_t bit)

drivers/counter/counter_mcux_rtc.c

@@ -9,6 +9,7 @@
 
 #include <zephyr/drivers/counter.h>
 #include <zephyr/irq.h>
+#include <zephyr/kernel.h>
 #include <fsl_rtc.h>
 #include <zephyr/logging/log.h>
 

drivers/display/display_mcux_elcdif.c

@@ -10,6 +10,7 @@
 #include <zephyr/drivers/display.h>
 #include <zephyr/drivers/pinctrl.h>
 #include <zephyr/drivers/gpio.h>
+#include <zephyr/kernel.h>
 #include <fsl_elcdif.h>
 
 #ifdef CONFIG_HAS_MCUX_CACHE

drivers/display/ssd1306.c

@@ -15,6 +15,7 @@ LOG_MODULE_REGISTER(ssd1306, CONFIG_DISPLAY_LOG_LEVEL);
 #include <zephyr/drivers/gpio.h>
 #include <zephyr/drivers/i2c.h>
 #include <zephyr/drivers/spi.h>
+#include <zephyr/kernel.h>
 
 #include "ssd1306_regs.h"
 #include <zephyr/display/cfb.h>

drivers/ec_host_cmd_periph/ec_host_cmd_simulator.c

@@ -10,6 +10,7 @@
 
 #include <zephyr/device.h>
 #include <zephyr/drivers/ec_host_cmd_periph.h>
+#include <zephyr/kernel.h>
 #include <string.h>
 
 #ifndef CONFIG_ARCH_POSIX

drivers/entropy/entropy_nrf5.c

@@ -6,6 +6,7 @@
  */
 
 #include <zephyr/drivers/entropy.h>
+#include <zephyr/kernel.h>
 #include <zephyr/sys/atomic.h>
 #include <soc.h>
 #include <hal/nrf_rng.h>

drivers/entropy/entropy_sam.c

@@ -10,6 +10,7 @@
 #include <zephyr/drivers/entropy.h>
 #include <errno.h>
 #include <zephyr/init.h>
+#include <zephyr/kernel.h>
 #include <soc.h>
 #include <string.h>
 

drivers/ethernet/phy/phy_mii.c

@@ -9,6 +9,7 @@
 #include <errno.h>
 #include <zephyr/device.h>
 #include <zephyr/init.h>
+#include <zephyr/kernel.h>
 #include <soc.h>
 #include <zephyr/drivers/mdio.h>
 #include <zephyr/net/phy.h>

drivers/flash/soc_flash_b91.c

@@ -12,7 +12,7 @@
 #include <string.h>
 #include <zephyr/device.h>
 #include <zephyr/drivers/flash.h>
-
+#include <zephyr/kernel.h>
 
 /* driver definitions */
 #define BLOCK_64K_SIZE         (0x10000u)

drivers/gpio/gpio_emul_sdl.c

@@ -7,6 +7,7 @@
 #define DT_DRV_COMPAT zephyr_gpio_emul_sdl
 
 #include <zephyr/drivers/gpio/gpio_emul.h>
+#include <zephyr/kernel.h>
 #include <zephyr/logging/log.h>
 
 #include <SDL.h>

drivers/gpio/gpio_fxl6408.c

@@ -6,6 +6,7 @@
 
 #include <zephyr/drivers/gpio.h>
 #include <zephyr/drivers/i2c.h>
+#include <zephyr/kernel.h>
 #include "gpio_utils.h"
 #include <zephyr/logging/log.h>
 

drivers/gpio/gpio_pcal6408a.c

@@ -6,6 +6,7 @@
 
 #define DT_DRV_COMPAT nxp_pcal6408a
 
+#include <zephyr/kernel.h>
 #include <zephyr/drivers/gpio.h>
 #include <zephyr/drivers/i2c.h>
 #include "gpio_utils.h"

drivers/gpio/gpio_pcf8574.c

@@ -10,6 +10,7 @@
 
 #include <zephyr/drivers/gpio.h>
 #include <zephyr/drivers/i2c.h>
+#include <zephyr/kernel.h>
 #include <zephyr/logging/log.h>
 LOG_MODULE_REGISTER(pcf8574, CONFIG_GPIO_LOG_LEVEL);
 

drivers/i2c/i2c_gecko.c

@@ -8,6 +8,7 @@
 
 #include <errno.h>
 #include <zephyr/drivers/i2c.h>
+#include <zephyr/kernel.h>
 #include <zephyr/sys/util.h>
 #include <em_cmu.h>
 #include <em_i2c.h>

drivers/i2c/i2c_ite_enhance.c

@@ -10,6 +10,7 @@
 #include <zephyr/drivers/i2c.h>
 #include <zephyr/drivers/pinctrl.h>
 #include <zephyr/irq.h>
+#include <zephyr/kernel.h>
 #include <zephyr/pm/policy.h>
 #include <errno.h>
 #include <soc.h>

drivers/i2c/i2c_ite_it8xxx2.c

@@ -10,6 +10,7 @@
 #include <zephyr/drivers/i2c.h>
 #include <zephyr/drivers/pinctrl.h>
 #include <zephyr/irq.h>
+#include <zephyr/kernel.h>
 #include <errno.h>
 #include <soc.h>
 #include <soc_dt.h>

drivers/i2c/i2c_mcux.c

@@ -8,6 +8,7 @@
 
 #include <errno.h>
 #include <zephyr/drivers/i2c.h>
+#include <zephyr/kernel.h>
 #include <soc.h>
 #include <fsl_i2c.h>
 #include <fsl_clock.h>

drivers/i2c/i2c_mcux_lpi2c.c

@@ -11,6 +11,7 @@
 #include <errno.h>
 #include <zephyr/drivers/i2c.h>
 #include <zephyr/drivers/clock_control.h>
+#include <zephyr/kernel.h>
 #include <fsl_lpi2c.h>
 
 #ifdef CONFIG_PINCTRL

drivers/i2c/i2c_nios2.c

@@ -9,6 +9,7 @@
 #include <errno.h>
 #include <zephyr/drivers/i2c.h>
 #include <zephyr/irq.h>
+#include <zephyr/kernel.h>
 #include <soc.h>
 #include <zephyr/sys/util.h>
 #include <altera_common.h>

drivers/i2c/i2c_npcx_controller.c

@@ -70,6 +70,7 @@
 #include <assert.h>
 #include <zephyr/drivers/clock_control.h>
 #include <zephyr/drivers/i2c.h>
+#include <zephyr/kernel.h>
 #include <soc.h>
 
 #include <zephyr/logging/log.h>

drivers/mdio/mdio_esp32.c

@@ -10,6 +10,7 @@
 #include <zephyr/drivers/clock_control.h>
 #include <zephyr/drivers/mdio.h>
 #include <zephyr/drivers/pinctrl.h>
+#include <zephyr/kernel.h>
 #include <zephyr/logging/log.h>
 
 #include <esp_mac.h>

drivers/mdio/mdio_sam.c

@@ -9,6 +9,7 @@
 #include <errno.h>
 #include <zephyr/device.h>
 #include <zephyr/init.h>
+#include <zephyr/kernel.h>
 #include <soc.h>
 #include <zephyr/drivers/mdio.h>
 #include <zephyr/drivers/pinctrl.h>

drivers/pwm/pwm_imx.c

@@ -6,6 +6,7 @@
 
 #include <errno.h>
 #include <zephyr/drivers/pwm.h>
+#include <zephyr/kernel.h>
 #include <soc.h>
 #include <device_imx.h>
 #include <zephyr/drivers/pinctrl.h>

drivers/sdhc/mcux_sdif.c

@@ -12,6 +12,7 @@
 #include <zephyr/drivers/clock_control.h>
 #include <zephyr/logging/log.h>
 #include <zephyr/irq.h>
+#include <zephyr/kernel.h>
 #include <fsl_sdif.h>
 
 LOG_MODULE_REGISTER(sdif, CONFIG_SDHC_LOG_LEVEL);

drivers/sensor/adxl372/adxl372.h

@@ -11,6 +11,7 @@
 #include <zephyr/types.h>
 #include <zephyr/device.h>
 #include <zephyr/drivers/gpio.h>
+#include <zephyr/kernel.h>
 #include <zephyr/sys/util.h>
 
 #if DT_ANY_INST_ON_BUS_STATUS_OKAY(spi)

drivers/sensor/bma280/bma280.h

@@ -12,6 +12,7 @@
 #include <zephyr/types.h>
 #include <zephyr/drivers/i2c.h>
 #include <zephyr/drivers/gpio.h>
+#include <zephyr/kernel.h>
 
 #define BMA280_REG_CHIP_ID		0x00
 #if DT_INST_PROP(0, is_bmc150)

drivers/sensor/bmi160/bmi160.h

@@ -14,6 +14,7 @@
 #include <zephyr/drivers/gpio.h>
 #include <zephyr/drivers/sensor.h>
 #include <zephyr/drivers/spi.h>
+#include <zephyr/kernel.h>
 #include <zephyr/sys/util.h>
 
 /* registers */

drivers/sensor/bmi270/bmi270.c

@@ -9,6 +9,7 @@
 
 #include <zephyr/drivers/sensor.h>
 #include <zephyr/init.h>
+#include <zephyr/kernel.h>
 #include <zephyr/sys/__assert.h>
 #include <zephyr/sys/byteorder.h>
 #include <zephyr/logging/log.h>

drivers/sensor/bmi270/bmi270_spi.c

@@ -8,6 +8,7 @@
  * Bus-specific functionality for BMI270s accessed via SPI.
  */
 
+#include <zephyr/kernel.h>
 #include <zephyr/logging/log.h>
 #include "bmi270.h"
 

drivers/sensor/fxas21002/fxas21002.h

@@ -7,6 +7,7 @@
 #include <zephyr/drivers/sensor.h>
 #include <zephyr/drivers/i2c.h>
 #include <zephyr/drivers/gpio.h>
+#include <zephyr/kernel.h>
 
 #define FXAS21002_REG_STATUS		0x00
 #define FXAS21002_REG_OUTXMSB		0x01

drivers/sensor/fxos8700/fxos8700.h

@@ -7,6 +7,7 @@
 #include <zephyr/drivers/sensor.h>
 #include <zephyr/drivers/i2c.h>
 #include <zephyr/drivers/gpio.h>
+#include <zephyr/kernel.h>
 
 #define FXOS8700_REG_STATUS			0x00
 #define FXOS8700_REG_OUTXMSB			0x01

drivers/sensor/hmc5883l/hmc5883l.h

@@ -12,6 +12,7 @@
 #include <zephyr/types.h>
 #include <zephyr/drivers/i2c.h>
 #include <zephyr/drivers/gpio.h>
+#include <zephyr/kernel.h>
 
 #define HMC5883L_REG_CONFIG_A           0x00
 #define HMC5883L_ODR_SHIFT              2

drivers/sensor/icm42605/icm42605.h

@@ -10,6 +10,7 @@
 #include <zephyr/device.h>
 #include <zephyr/drivers/gpio.h>
 #include <zephyr/drivers/spi.h>
+#include <zephyr/kernel.h>
 #include <zephyr/sys/util.h>
 #include <zephyr/types.h>
 

drivers/sensor/icm42670/icm42670.h

@@ -11,6 +11,7 @@
 #include <zephyr/drivers/gpio.h>
 #include <zephyr/drivers/sensor.h>
 #include <zephyr/drivers/spi.h>
+#include <zephyr/kernel.h>
 
 struct icm42670_data {
 	int16_t accel_x;

drivers/sensor/icm42670/icm42670_spi.c

@@ -5,6 +5,7 @@
  * SPDX-License-Identifier: Apache-2.0
  */
 
+#include <zephyr/kernel.h>
 #include <zephyr/sys/util.h>
 #include "icm42670_spi.h"
 #include "icm42670_reg.h"

drivers/sensor/iis2dh/iis2dh.h

@@ -16,6 +16,7 @@
 #include <zephyr/drivers/gpio.h>
 #include <zephyr/sys/util.h>
 #include <zephyr/drivers/sensor.h>
+#include <zephyr/kernel.h>
 #include "iis2dh_reg.h"
 
 /*

drivers/sensor/iis2mdc/iis2mdc.h

@@ -13,6 +13,7 @@
 
 #include <zephyr/drivers/gpio.h>
 #include <zephyr/drivers/sensor.h>
+#include <zephyr/kernel.h>
 #include <zephyr/sys/util.h>
 #include "iis2mdc_reg.h"
 

drivers/sensor/iis3dhhc/iis3dhhc.h

@@ -15,6 +15,7 @@
 #include <zephyr/drivers/spi.h>
 #include <zephyr/drivers/gpio.h>
 #include <zephyr/drivers/sensor.h>
+#include <zephyr/kernel.h>
 #include <zephyr/types.h>
 #include <zephyr/sys/util.h>
 #include "iis3dhhc_reg.h"

drivers/sensor/ina23x/ina230.h

@@ -10,6 +10,7 @@
 
 #include <zephyr/drivers/gpio.h>
 #include <zephyr/drivers/i2c.h>
+#include <zephyr/kernel.h>
 
 #define INA230_REG_CONFIG     0x00
 #define INA230_REG_SHUNT_VOLT 0x01

drivers/sensor/ina23x/ina23x_trigger.h

@@ -9,6 +9,7 @@
 
 #include <zephyr/drivers/gpio.h>
 #include <zephyr/drivers/sensor.h>
+#include <zephyr/kernel.h>
 
 struct ina23x_trigger {
 	struct gpio_callback gpio_cb;

drivers/sensor/ism330dhcx/ism330dhcx.h

@@ -16,6 +16,7 @@
 #include <zephyr/drivers/gpio.h>
 #include <zephyr/drivers/spi.h>
 #include <zephyr/drivers/i2c.h>
+#include <zephyr/kernel.h>
 #include <zephyr/sys/util.h>
 #include "ism330dhcx_reg.h"
 

drivers/sensor/lis3mdl/lis3mdl.h

@@ -12,6 +12,7 @@
 #include <zephyr/types.h>
 #include <zephyr/drivers/i2c.h>
 #include <zephyr/drivers/gpio.h>
+#include <zephyr/kernel.h>
 
 #define LIS3MDL_REG_WHO_AM_I            0x0F
 #define LIS3MDL_CHIP_ID                 0x3D

drivers/sensor/lsm6dsl/lsm6dsl.h

@@ -14,6 +14,7 @@
 #include <zephyr/drivers/sensor.h>
 #include <zephyr/types.h>
 #include <zephyr/drivers/gpio.h>
+#include <zephyr/kernel.h>
 #include <zephyr/sys/util.h>
 
 #if DT_ANY_INST_ON_BUS_STATUS_OKAY(spi)

drivers/sensor/max17055/max17055.c

@@ -6,6 +6,7 @@
 
 #include <zephyr/drivers/i2c.h>
 #include <zephyr/drivers/sensor.h>
+#include <zephyr/kernel.h>
 #include <zephyr/sys/byteorder.h>
 
 #include <zephyr/logging/log.h>

drivers/sensor/max17262/max17262.c

@@ -6,6 +6,7 @@
 
 #include <zephyr/drivers/i2c.h>
 #include <zephyr/drivers/sensor.h>
+#include <zephyr/kernel.h>
 
 #include <zephyr/logging/log.h>
 LOG_MODULE_REGISTER(max17262, CONFIG_SENSOR_LOG_LEVEL);

drivers/sensor/mcux_acmp/mcux_acmp.c

@@ -11,6 +11,7 @@
 #include <zephyr/drivers/sensor.h>
 #include <zephyr/drivers/sensor/mcux_acmp.h>
 #include <zephyr/logging/log.h>
+#include <zephyr/kernel.h>
 #include <fsl_acmp.h>
 #include <zephyr/drivers/pinctrl.h>
 

drivers/sensor/mpu6050/mpu6050.h

@@ -10,6 +10,7 @@
 #include <zephyr/device.h>
 #include <zephyr/drivers/i2c.h>
 #include <zephyr/drivers/gpio.h>
+#include <zephyr/kernel.h>
 #include <zephyr/sys/util.h>
 #include <zephyr/types.h>
 

drivers/sensor/ms5607/ms5607_spi.c

@@ -8,6 +8,7 @@
 
 #include <string.h>
 #include <zephyr/drivers/spi.h>
+#include <zephyr/kernel.h>
 #include <zephyr/sys/byteorder.h>
 #include "ms5607.h"
 

drivers/sensor/nuvoton_adc_cmp_npcx/adc_cmp_npcx.c

@@ -7,7 +7,7 @@
 #include <zephyr/drivers/sensor.h>
 #include <zephyr/drivers/adc/adc_npcx_threshold.h>
 #include <zephyr/drivers/sensor/adc_cmp_npcx.h>
-
+#include <zephyr/kernel.h>
 #include <zephyr/logging/log.h>
 
 LOG_MODULE_REGISTER(adc_cmp_npcx, CONFIG_SENSOR_LOG_LEVEL);

drivers/sensor/sm351lt/sm351lt.h

@@ -10,6 +10,7 @@
 #include <stdint.h>
 #include <zephyr/drivers/gpio.h>
 #include <zephyr/drivers/sensor.h>
+#include <zephyr/kernel.h>
 
 #define SENSOR_ATTR_SM351LT_TRIGGER_TYPE SENSOR_ATTR_PRIV_START
 

drivers/sensor/stts751/stts751.h

@@ -15,6 +15,7 @@
 #include <zephyr/drivers/i2c.h>
 #include <zephyr/drivers/gpio.h>
 #include <zephyr/drivers/sensor.h>
+#include <zephyr/kernel.h>
 #include <zephyr/types.h>
 #include <zephyr/sys/util.h>
 #include "stts751_reg.h"

drivers/sensor/vcnl4040/vcnl4040.h

@@ -10,6 +10,7 @@
 #include <zephyr/drivers/sensor.h>
 #include <zephyr/drivers/i2c.h>
 #include <zephyr/drivers/gpio.h>
+#include <zephyr/kernel.h>
 
 /* Registers all 16 bits */
 #define VCNL4040_REG_ALS_CONF	0x00

drivers/serial/uart_mcux_lpuart.c

@@ -14,6 +14,7 @@
 #include <zephyr/drivers/uart.h>
 #include <zephyr/drivers/clock_control.h>
 #include <zephyr/irq.h>
+#include <zephyr/kernel.h>
 #include <zephyr/pm/policy.h>
 #ifdef CONFIG_PINCTRL
 #include <zephyr/drivers/pinctrl.h>

drivers/serial/uart_native_posix.c

@@ -18,6 +18,8 @@
 #include <poll.h>
 
 #include <zephyr/drivers/uart.h>
+#include <zephyr/kernel.h>
+
 #include "cmdline.h" /* native_posix command line options header */
 #include "soc.h"
 

drivers/serial/uart_rtt.c

@@ -5,6 +5,7 @@
  */
 
 #include <zephyr/drivers/uart.h>
+#include <zephyr/kernel.h>
 #include <SEGGER_RTT.h>
 
 #define DT_DRV_COMPAT segger_rtt_uart

drivers/serial/uart_xlnx_uartlite.c

@@ -12,6 +12,7 @@
 #include <zephyr/device.h>
 #include <zephyr/drivers/uart.h>
 #include <zephyr/irq.h>
+#include <zephyr/kernel.h>
 #include <zephyr/sys/sys_io.h>
 
 /* AXI UART Lite v2 registers offsets (See Xilinx PG142 for details) */

drivers/spi/spi_context.h

@@ -14,6 +14,7 @@
 
 #include <zephyr/drivers/gpio.h>
 #include <zephyr/drivers/spi.h>
+#include <zephyr/kernel.h>
 
 #ifdef __cplusplus
 extern "C" {

drivers/timer/mcux_lptmr_timer.c

@@ -8,6 +8,7 @@
 
 #include <zephyr/device.h>
 #include <zephyr/drivers/timer/system_timer.h>
+#include <zephyr/kernel.h>
 #include <fsl_lptmr.h>
 
 BUILD_ASSERT(DT_NUM_INST_STATUS_OKAY(DT_DRV_COMPAT) == 1,

drivers/timer/npcx_itim_timer.c

@@ -37,6 +37,7 @@
 #include <zephyr/device.h>
 #include <zephyr/drivers/clock_control.h>
 #include <zephyr/drivers/timer/system_timer.h>
+#include <zephyr/kernel.h>
 #include <zephyr/sys_clock.h>
 #include <zephyr/spinlock.h>
 #include <soc.h>

drivers/usb/device/usb_dc_mcux.c

@@ -13,6 +13,7 @@
 #include <zephyr/usb/usb_device.h>
 #include <soc.h>
 #include <zephyr/device.h>
+#include <zephyr/kernel.h>
 #include "usb.h"
 #include "usb_device.h"
 #include "usb_device_config.h"

drivers/usb/device/usb_dc_native_posix.c

@@ -11,6 +11,7 @@
 
 #include <string.h>
 #include <stdio.h>
+#include <zephyr/kernel.h>
 #include <zephyr/sys/byteorder.h>
 #include <zephyr/drivers/usb/usb_dc.h>
 #include <zephyr/usb/usb_device.h>

drivers/usb/device/usb_dc_sam_usbhs.c

@@ -8,6 +8,7 @@
 
 #include <zephyr/usb/usb_device.h>
 #include <zephyr/irq.h>
+#include <zephyr/kernel.h>
 #include <soc.h>
 #include <string.h>
 

drivers/watchdog/wdt_iwdg_stm32.c

@@ -10,6 +10,7 @@
 #define DT_DRV_COMPAT st_stm32_watchdog
 
 #include <zephyr/drivers/watchdog.h>
+#include <zephyr/kernel.h>
 #include <soc.h>
 #include <stm32_ll_bus.h>
 #include <stm32_ll_iwdg.h>

include/zephyr/drivers/adc.h

@@ -15,6 +15,7 @@
 
 #include <zephyr/device.h>
 #include <zephyr/dt-bindings/adc/adc.h>
+#include <zephyr/kernel.h>
 
 #ifdef __cplusplus
 extern "C" {

include/zephyr/drivers/can.h

@@ -12,6 +12,7 @@
 
 #include <zephyr/types.h>
 #include <zephyr/device.h>
+#include <zephyr/kernel.h>
 #include <string.h>
 #include <zephyr/sys/util.h>
 

include/zephyr/drivers/i2c.h

@@ -23,6 +23,7 @@
 
 #include <zephyr/types.h>
 #include <zephyr/device.h>
+#include <zephyr/kernel.h>
 
 #ifdef __cplusplus
 extern "C" {

include/zephyr/drivers/spi.h

@@ -24,6 +24,7 @@
 #include <zephyr/device.h>
 #include <zephyr/dt-bindings/spi/spi.h>
 #include <zephyr/drivers/gpio.h>
+#include <zephyr/kernel.h>
 
 #ifdef __cplusplus
 extern "C" {

include/zephyr/drivers/virtualization/ivshmem.h

@@ -16,6 +16,7 @@
 #include <zephyr/types.h>
 #include <stddef.h>
 #include <zephyr/device.h>
+#include <zephyr/kernel.h>
 
 #ifdef __cplusplus
 extern "C" {

include/zephyr/drivers/w1.h

@@ -15,6 +15,7 @@
 
 #include <zephyr/types.h>
 #include <zephyr/device.h>
+#include <zephyr/kernel.h>
 #include <zephyr/sys/crc.h>
 #include <zephyr/sys/byteorder.h>
 

include/zephyr/ipc/ipc_service.h

@@ -9,6 +9,7 @@
 
 #include <stdio.h>
 #include <zephyr/device.h>
+#include <zephyr/kernel.h>
 
 #ifdef __cplusplus
 extern "C" {

include/zephyr/ipc/ipc_service_backend.h

@@ -8,6 +8,7 @@
 #define ZEPHYR_INCLUDE_IPC_SERVICE_IPC_SERVICE_BACKEND_H_
 
 #include <zephyr/ipc/ipc_service.h>
+#include <zephyr/kernel.h>
 #include <stdio.h>
 
 #ifdef __cplusplus

include/zephyr/sd/sd.h

@@ -14,6 +14,7 @@
 
 #include <zephyr/device.h>
 #include <zephyr/drivers/sdhc.h>
+#include <zephyr/kernel.h>
 
 #ifdef __cplusplus
 extern "C" {

samples/boards/nrf/mesh/onoff_level_lighting_vnd_app/src/app_gpio.c

@@ -6,6 +6,7 @@
  */
 
 #include <zephyr/drivers/gpio.h>
+#include <zephyr/kernel.h>
 
 #include "app_gpio.h"
 #include "publisher.h"

samples/boards/nrf/mesh/onoff_level_lighting_vnd_app/src/mesh/publisher.h

@@ -8,6 +8,8 @@
 #ifndef _PUBLISHER_H
 #define _PUBLISHER_H
 
+#include <zephyr/kernel.h>
+
 /* Others */
 #define LEVEL_S0   -32768
 #define LEVEL_S25  -16384

samples/drivers/ht16k33/src/main.c

@@ -7,6 +7,7 @@
 #include <zephyr/drivers/led.h>
 #include <zephyr/drivers/kscan.h>
 #include <zephyr/devicetree.h>
+#include <zephyr/kernel.h>
 #include <zephyr/logging/log.h>
 
 LOG_MODULE_REGISTER(main, CONFIG_LOG_DEFAULT_LEVEL);

soc/xtensa/intel_adsp/cavs/power.c

@@ -9,6 +9,7 @@
 #include <zephyr/irq_nextlevel.h>
 #include <xtensa/hal.h>
 #include <zephyr/init.h>
+#include <zephyr/kernel.h>
 
 #include <adsp_shim.h>
 #include <adsp-clk.h>

soc/xtensa/intel_adsp/common/clk.c

@@ -7,6 +7,7 @@
 #include <errno.h>
 
 #include <zephyr/device.h>
+#include <zephyr/kernel.h>
 
 #include <adsp-clk.h>
 #include <adsp_shim.h>

subsys/fs/fs.c

@@ -11,6 +11,7 @@
 #include <zephyr/types.h>
 #include <errno.h>
 #include <zephyr/init.h>
+#include <zephyr/kernel.h>
 #include <zephyr/fs/fs.h>
 #include <zephyr/fs/fs_sys.h>
 #include <zephyr/sys/check.h>

subsys/mgmt/ec_host_cmd/ec_host_cmd_handler.c

@@ -7,6 +7,7 @@
 #include <zephyr/drivers/ec_host_cmd_periph.h>
 #include <zephyr/mgmt/ec_host_cmd.h>
 #include <zephyr/devicetree.h>
+#include <zephyr/kernel.h>
 #include <string.h>
 
 #if !DT_HAS_CHOSEN(zephyr_ec_host_interface)

subsys/pm/pm_stats.c

@@ -8,7 +8,7 @@
 #include "pm_stats.h"
 
 #include <zephyr/init.h>
-#include <zephyr/kernel_structs.h>
+#include <zephyr/kernel.h>
 #include <zephyr/stats/stats.h>
 #include <zephyr/sys/printk.h>
 

tests/drivers/clock_control/nrf_clock_calibration/src/mock_temp_nrf5.c

@@ -5,6 +5,7 @@
  */
 #include <zephyr/device.h>
 #include <zephyr/drivers/sensor.h>
+#include <zephyr/kernel.h>
 
 /* Mock of internal temperature sensor. */
 #ifdef CONFIG_TEMP_NRF5