diff --git a/drivers/sensor/sht3xd/Kconfig b/drivers/sensor/sht3xd/Kconfig
index 4aff3bc21b7..c728ab97cc4 100644
--- a/drivers/sensor/sht3xd/Kconfig
+++ b/drivers/sensor/sht3xd/Kconfig
@@ -38,22 +38,6 @@ endchoice
 config SHT3XD_TRIGGER
 	bool
 
-config SHT3XD_GPIO_DEV_NAME
-	string "GPIO device"
-	default "GPIO_0"
-	depends on SHT3XD_TRIGGER
-	help
-	  The device name of the GPIO device to which the SHT3xD interrupt
-	  pins are connected.
-
-config SHT3XD_GPIO_PIN_NUM
-	int "Interrupt GPIO pin number"
-	default 0
-	depends on SHT3XD_TRIGGER
-	help
-	  The number of the GPIO on which the interrupt signal from the
-	  SHT3xD chip will be received.
-
 config SHT3XD_THREAD_PRIORITY
 	int "Thread priority"
 	depends on SHT3XD_TRIGGER_OWN_THREAD
diff --git a/drivers/sensor/sht3xd/sht3xd_trigger.c b/drivers/sensor/sht3xd/sht3xd_trigger.c
index ccb3e831563..a70169e5a32 100644
--- a/drivers/sensor/sht3xd/sht3xd_trigger.c
+++ b/drivers/sensor/sht3xd/sht3xd_trigger.c
@@ -90,7 +90,7 @@ static void sht3xd_gpio_callback(struct device *dev,
 
 	ARG_UNUSED(pins);
 
-	gpio_pin_disable_callback(dev, CONFIG_SHT3XD_GPIO_PIN_NUM);
+	gpio_pin_disable_callback(dev, DT_SHT3XD_GPIO_ALERT_PIN);
 
 #if defined(CONFIG_SHT3XD_TRIGGER_OWN_THREAD)
 	k_sem_give(&drv_data->gpio_sem);
@@ -108,7 +108,7 @@ static void sht3xd_thread_cb(void *arg)
 		drv_data->handler(dev, &drv_data->trigger);
 	}
 
-	gpio_pin_enable_callback(drv_data->gpio, CONFIG_SHT3XD_GPIO_PIN_NUM);
+	gpio_pin_enable_callback(drv_data->gpio, DT_SHT3XD_GPIO_ALERT_PIN);
 }
 
 #ifdef CONFIG_SHT3XD_TRIGGER_OWN_THREAD
@@ -146,10 +146,10 @@ int sht3xd_trigger_set(struct device *dev,
 		return -ENOTSUP;
 	}
 
-	gpio_pin_disable_callback(drv_data->gpio, CONFIG_SHT3XD_GPIO_PIN_NUM);
+	gpio_pin_disable_callback(drv_data->gpio, DT_SHT3XD_GPIO_ALERT_PIN);
 	drv_data->handler = handler;
 	drv_data->trigger = *trig;
-	gpio_pin_enable_callback(drv_data->gpio, CONFIG_SHT3XD_GPIO_PIN_NUM);
+	gpio_pin_enable_callback(drv_data->gpio, DT_SHT3XD_GPIO_ALERT_PIN);
 
 	return 0;
 }
@@ -187,20 +187,20 @@ int sht3xd_init_interrupt(struct device *dev)
 	}
 
 	/* setup gpio interrupt */
-	drv_data->gpio = device_get_binding(CONFIG_SHT3XD_GPIO_DEV_NAME);
+	drv_data->gpio = device_get_binding(DT_SHT3XD_GPIO_ALERT_DEV_NAME);
 	if (drv_data->gpio == NULL) {
 		LOG_DBG("Failed to get pointer to %s device!",
-		    CONFIG_SHT3XD_GPIO_DEV_NAME);
+		    DT_SHT3XD_GPIO_ALERT_DEV_NAME);
 		return -EINVAL;
 	}
 
-	gpio_pin_configure(drv_data->gpio, CONFIG_SHT3XD_GPIO_PIN_NUM,
+	gpio_pin_configure(drv_data->gpio, DT_SHT3XD_GPIO_ALERT_PIN,
 			   GPIO_DIR_IN | GPIO_INT | GPIO_INT_LEVEL |
 			   GPIO_INT_ACTIVE_HIGH | GPIO_INT_DEBOUNCE);
 
 	gpio_init_callback(&drv_data->gpio_cb,
 			   sht3xd_gpio_callback,
-			   BIT(CONFIG_SHT3XD_GPIO_PIN_NUM));
+			   BIT(DT_SHT3XD_GPIO_ALERT_PIN));
 
 	if (gpio_add_callback(drv_data->gpio, &drv_data->gpio_cb) < 0) {
 		LOG_DBG("Failed to set gpio callback!");
diff --git a/dts/bindings/sensor/sensirion,sht3xd.yaml b/dts/bindings/sensor/sensirion,sht3xd.yaml
index 938b72422a1..0d825ee7ca6 100644
--- a/dts/bindings/sensor/sensirion,sht3xd.yaml
+++ b/dts/bindings/sensor/sensirion,sht3xd.yaml
@@ -17,5 +17,10 @@ inherits:
 properties:
     compatible:
       constraint: "sensirion,sht3xd"
+    alert-gpios:
+      type: compound
+      category: optional
+      description: ALERT pin
+      generation: define, use-prop-name
 
 ...