zephyr/boards/infineon/xmc45_relax_kit/xmc45_relax_kit.yaml

identifier: xmc45_relax_kit
name: XMC45-RELAX-KIT
type: mcu
arch: arm
toolchain:
  - zephyr
  - gnuarmemb
  - xtools
supported:
  - adc
  - dma
  - gpio
  - spi
  - uart
  - watchdog
  - netif:eth
  - rtc
ram: 160
flash: 1024
vendor: infineon
board: arm: add support for infineon relax kit Add support for relax kit with infineon xmc4500 SoC. Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> 2020-04-21 18:30:02 +08:00			`identifier: xmc45_relax_kit`
			`name: XMC45-RELAX-KIT`
			`type: mcu`
			`arch: arm`
			`toolchain:`
			`- zephyr`
			`- gnuarmemb`
			`- xtools`
boards: arm: xmc45_relax_kit: Add supported section in .yaml file So that twister tests can be properly triggered on hardware. For example using command: $ scripts/twister --device-testing --device-serial /dev/ttyUSB0 \ --device-serial-baud 115200 -p xmc45_relax_kit --fixture gpio_loopback \ -T tests/drivers/uart/uart_async_api/ Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com> 2023-04-09 04:15:47 +08:00			`supported:`
			`- adc`
			`- dma`
			`- gpio`
			`- spi`
			`- uart`
drivers: watchdog: Add xmc4xxx support Adds watchdog support for Infineon xmc4xxx MCUs. Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com> 2023-09-22 03:47:13 +08:00			`- watchdog`
boards: xmc45_relax_kit: Add ethernet/mdio to the devicetree Adds ethernet/mdio into to the devicetree. Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com> 2023-12-19 23:12:48 +08:00			`- netif:eth`
boards: infineon: Add RTC to xmc4(75)_relax_kit boards Adds RTC node to xmc4(75)_relax_kits. Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com> 2024-07-01 05:07:28 +08:00			`- rtc`
board: arm: add support for infineon relax kit Add support for relax kit with infineon xmc4500 SoC. Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> 2020-04-21 18:30:02 +08:00			`ram: 160`
			`flash: 1024`
boards: add vendor to board yaml This is coming from devicetree and corrosponds to what we have in the dts/bindings/vendor-prefixes.txt file. This will allow for static filtering, especially with twister, i.e. no need to build anything to know the vendor of a board All of the vendor data was extracted automatically from the devicetree, so some platforms might not have the right vendor or no vendor at all right now, we need to fix some of the DTS information or do this manually to get this 100% correct. But we are close. Signed-off-by: Anas Nashif <anas.nashif@intel.com> 2023-06-23 02:47:45 +08:00			`vendor: infineon`