OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/boards/xtensa/esp32/esp32.dts

77 lines
1.0 KiB
Plaintext
Raw Normal View History

dts: xtensa: esp32: Add device tree support. add device tree support for esp32 Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
2019-01-23 18:31:32 +08:00
/*
* Copyright (c) 2019 Intel Corporation.
*
* SPDX-License-Identifier: Apache-2.0
*/
/dts-v1/;
dts: Restructure xtensa dts directory Restructure xtensa dts directory Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
2019-06-16 19:17:06 +08:00
#include <espressif/esp32.dtsi>
dts: xtensa: esp32: Add device tree support. add device tree support for esp32 Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
2019-01-23 18:31:32 +08:00
/ {
model = "esp32";
dts: Restructure xtensa dts directory Restructure xtensa dts directory Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
2019-06-16 19:17:06 +08:00
compatible = "espressif,esp32";
dts: xtensa: esp32: Add device tree support. add device tree support for esp32 Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
2019-01-23 18:31:32 +08:00
aliases {
uart-0 = &uart0;
[ESP32] drivers: Add I2C Device tree support - Add I2C modules to esp32.dtsi - I2C Pins and bitrate config moved to esp32.dts Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
2019-10-22 01:52:27 +08:00
i2c-0 = &i2c0;
dts: xtensa: esp32: Add device tree support. add device tree support for esp32 Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
2019-01-23 18:31:32 +08:00
};
chosen {
zephyr,sram = &sram0;
zephyr,console = &uart0;
drivers: esp32: Add UART Driver with FIFO/Interrupt support - Fixes #3981 - Implement UART Polling functions - Implement UART Interrupt APIs - Remove dependency on esp32_rom_uart_xxx functions - Update Device tree with UART addresses and pin config - Update ESP32 UART KConfig Notes about implementation: - Interrupts now defined as a local macros, and should be removed later on, when interrupts for esp32 are supported in dts - Threshold interrupts are used for TX/RX - Reseting FIFOs using _RST bit will corrupt FIFO of UART2 when used for UART1 and vice-versa, so a generic way is used for all three UARTs - Old Silicon rev is not supported Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
2019-08-22 05:54:00 +08:00
zephyr,shell-uart = &uart0;
dts: xtensa: esp32: Add device tree support. add device tree support for esp32 Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
2019-01-23 18:31:32 +08:00
};
};
dts: Add information about CPU frequency to the cpu nodes This commit adds 'clock-frequency' property to the cpu nodes. The clock frequency specified in the added property is used during platform configuration. Examples: - The SWO logger uses clock frequency to configure SWO output. - Plenty of platforms need CPU clock specified for their HAL. - Most of devices with USB needs information about CPU clock in order to configure USB clock source. Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
2019-06-21 20:47:08 +08:00
&cpu0 {
drivers: esp32/clock_control: support UART, I2C - Change default CPU Clock to 240MHz (PLL is activated) - I2C, UART will use sysclk from clock driver - esp32_enable_peripheral replaced by clock_control_on Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
2020-05-29 03:01:49 +08:00
clock-frequency = <ESP32_CLK_CPU_240M>;
dts: Add information about CPU frequency to the cpu nodes This commit adds 'clock-frequency' property to the cpu nodes. The clock frequency specified in the added property is used during platform configuration. Examples: - The SWO logger uses clock frequency to configure SWO output. - Plenty of platforms need CPU clock specified for their HAL. - Most of devices with USB needs information about CPU clock in order to configure USB clock source. Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
2019-06-21 20:47:08 +08:00
};
&cpu1 {
drivers: esp32/clock_control: support UART, I2C - Change default CPU Clock to 240MHz (PLL is activated) - I2C, UART will use sysclk from clock driver - esp32_enable_peripheral replaced by clock_control_on Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
2020-05-29 03:01:49 +08:00
clock-frequency = <ESP32_CLK_CPU_240M>;
dts: Add information about CPU frequency to the cpu nodes This commit adds 'clock-frequency' property to the cpu nodes. The clock frequency specified in the added property is used during platform configuration. Examples: - The SWO logger uses clock frequency to configure SWO output. - Plenty of platforms need CPU clock specified for their HAL. - Most of devices with USB needs information about CPU clock in order to configure USB clock source. Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
2019-06-21 20:47:08 +08:00
};
dts: xtensa: esp32: Add device tree support. add device tree support for esp32 Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
2019-01-23 18:31:32 +08:00
&uart0 {
dts: Replace status = "ok" with status = "okay" The DT spec. only has "okay" and not "ok". The Linux kernel has around 12k "okay"s and 300 "ok"s. The scripts/dts scripts only check for "disabled", so should be safe re. those at least. The replacement was done with git ls-files | xargs sed -i 's/status\s*=\s*"ok"/status = "okay"/' Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-06-15 01:31:16 +08:00
status = "okay";
dts: xtensa: esp32: Add device tree support. add device tree support for esp32 Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
2019-01-23 18:31:32 +08:00
current-speed = <115200>;
drivers: esp32: Add UART Driver with FIFO/Interrupt support - Fixes #3981 - Implement UART Polling functions - Implement UART Interrupt APIs - Remove dependency on esp32_rom_uart_xxx functions - Update Device tree with UART addresses and pin config - Update ESP32 UART KConfig Notes about implementation: - Interrupts now defined as a local macros, and should be removed later on, when interrupts for esp32 are supported in dts - Threshold interrupts are used for TX/RX - Reseting FIFOs using _RST bit will corrupt FIFO of UART2 when used for UART1 and vice-versa, so a generic way is used for all three UARTs - Old Silicon rev is not supported Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
2019-08-22 05:54:00 +08:00
tx-pin = <1>;
rx-pin = <3>;
rts-pin = <22>;
cts-pin = <19>;
};
&uart1 {
current-speed = <115200>;
tx-pin = <10>;
rx-pin = <9>;
rts-pin = <11>;
cts-pin = <6>;
drivers: esp32: UART - use dts config for HW flow Control - dts updated for UART1/2 - Additional check added to _INIT macro to configure flow control mode - Additional check added to _INIT macro to set CTS/RTS gpios values - Additional check added for gpio config Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
2019-08-23 06:53:22 +08:00
hw-flow-control;
drivers: esp32: Add UART Driver with FIFO/Interrupt support - Fixes #3981 - Implement UART Polling functions - Implement UART Interrupt APIs - Remove dependency on esp32_rom_uart_xxx functions - Update Device tree with UART addresses and pin config - Update ESP32 UART KConfig Notes about implementation: - Interrupts now defined as a local macros, and should be removed later on, when interrupts for esp32 are supported in dts - Threshold interrupts are used for TX/RX - Reseting FIFOs using _RST bit will corrupt FIFO of UART2 when used for UART1 and vice-versa, so a generic way is used for all three UARTs - Old Silicon rev is not supported Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
2019-08-22 05:54:00 +08:00
};
&uart2 {
current-speed = <115200>;
tx-pin = <17>;
rx-pin = <16>;
rts-pin = <7>;
cts-pin = <8>;
drivers: esp32: UART - use dts config for HW flow Control - dts updated for UART1/2 - Additional check added to _INIT macro to configure flow control mode - Additional check added to _INIT macro to set CTS/RTS gpios values - Additional check added for gpio config Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
2019-08-23 06:53:22 +08:00
hw-flow-control;
dts: xtensa: esp32: Add device tree support. add device tree support for esp32 Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
2019-01-23 18:31:32 +08:00
};
[ESP32] drivers: Add I2C Device tree support - Add I2C modules to esp32.dtsi - I2C Pins and bitrate config moved to esp32.dts Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
2019-10-22 01:52:27 +08:00
&i2c0 {
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
sda-pin = <21>;
scl-pin = <22>;
};
&i2c1 {
clock-frequency = <I2C_BITRATE_FAST>;
sda-pin = <18>;
scl-pin = <5>;
};
esp32: drivers: Add Entropy Device tree support - Add TRNG module to esp32.dtsi - Updated the note about TRNG register address Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
2019-10-22 16:04:13 +08:00
&trng0 {
status = "okay";
};