zephyr/boards/arm/mr_canhubk3/mr_canhubk3.yaml

# Copyright 2023 NXP
# SPDX-License-Identifier: Apache-2.0

identifier: mr_canhubk3
name: NXP MR-CANHUBK3
type: mcu
arch: arm
ram: 1024
flash: 1024
toolchain:
  - zephyr
supported:
  - gpio
  - uart
  - can
  - i2c
boards: arm: introduce NXP MR-CANHUBK3 board NXP MR-CANHUBK3 is an evaluation board for mobile robotics applications. It features an NXP S32K344 MCU based on an Arm Cortex-M7 core (lock-step). By default, this board configuration uses Lauterbach TRACE32 West runner for flashing and debugging applications, but other debuggers can be used to download the program to flash. Co-authored-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com> Co-authored-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com> Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com> 2023-05-26 08:00:00 +08:00			`# Copyright 2023 NXP`
			`# SPDX-License-Identifier: Apache-2.0`

			`identifier: mr_canhubk3`
			`name: NXP MR-CANHUBK3`
			`type: mcu`
			`arch: arm`
			`ram: 1024`
			`flash: 1024`
			`toolchain:`
			`- zephyr`
boards: arm: mr_canhubk3: add support for GPIO Add GPIO support for mr_canhubk3 board and enable GPIO tests. Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com> 2023-05-26 08:00:00 +08:00			`supported:`
			`- gpio`
boards: mr_canhubk3: enable LPUART serial driver Reuse existing MCUX-based shim driver for LPUART that is compatible with the hardware block in S32K344. DMA is not yet supported. Use the board's debug connector (P6 / LPUART2) as default console. Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com> 2023-05-26 08:00:00 +08:00			`- uart`
boards: arm: mr_canhubk3: enable support for FlexCAN Reuse existing MCUX-based shim driver for FlexCAN. Enable flexcan0 for Zephyr canbus to run tests. Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com> 2023-06-14 15:20:41 +08:00			`- can`
drivers: i2c_mcux: update to compatible with S32K344 Update to shim driver compatible with the hardware block in S32K344. Configure the pins before initializing I2C to avoid happening bus busy. Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com> 2023-07-10 14:37:46 +08:00			`- i2c`