zephyr/boards/arm/udoo_neo_full_m4/board.cmake

#
# Copyright (c) 2018, NXP
#
# SPDX-License-Identifier: Apache-2.0
#

board_runner_args(jlink "--device=Cortex-M4")
include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake)
boards/arm: add support for udoo_neo_full_m4 board The UDOO Neo Full single board computer configuration supports the following hardware features on the Cortex M4 Core: +-----------+------------+-------------------------------------+ \| Interface \| Controller \| Driver/Component \| +===========+============+=====================================+ \| NVIC \| on-chip \| nested vector interrupt controller \| +-----------+------------+-------------------------------------+ \| SYSTICK \| on-chip \| systick \| +-----------+------------+-------------------------------------+ \| UART \| on-chip \| serial port-polling; \| \| \| \| serial port-interrupt \| +-----------+------------+-------------------------------------+ \| GPIO \| on-chip \| general purpose input/output \| +-----------+------------+-------------------------------------+ The default configuration can be found in the defconfig file: boards/arm/udoo_neo_full_m4/udoo_neo_full_m4_defconfig Other hardware features are not currently supported by the port. Connections and IOs: The UDOO Neo Full board was tested with the following pinmux controller configuration. +---------------+-----------------+---------------------------+ \| Board Name \| SoC Name \| Usage \| +===============+=================+===========================+ \| J4 RX \| UART5_RX_DATA \| UART Console \| +---------------+-----------------+---------------------------+ \| J4 TX \| UART5_TX_DATA \| UART Console \| +---------------+-----------------+---------------------------+ The board has been tested with the following samples. - samples/hello_world - samples/basic/blinky Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com> 2018-04-19 00:26:39 +08:00			`#`
			`# Copyright (c) 2018, NXP`
			`#`
			`# SPDX-License-Identifier: Apache-2.0`
			`#`

			`board_runner_args(jlink "--device=Cortex-M4")`
			`include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake)`