OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/boards/posix/native_posix/Kconfig.defconfig

97 lines
1.2 KiB
Plaintext
Raw Normal View History

native: build .exe files for posix arch Native port now adds .exe to the generated ELF Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com> Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2017-11-23 21:28:26 +08:00
if BOARD_NATIVE_POSIX
config BUILD_OUTPUT_BIN
default n
config BUILD_OUTPUT_EXE
default y
posix: ld: Don't print memory usage Don't print memory usage, the results are not meaningful for posix boards. Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
2017-12-28 20:28:24 +08:00
config OUTPUT_PRINT_MEMORY_USAGE
default n
native: build .exe files for posix arch Native port now adds .exe to the generated ELF Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com> Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2017-11-23 21:28:26 +08:00
config BOARD
default "native_posix"
drivers: eth: native_posix: Enable ethernet by default if needed As the native_posix board has ethernet driver, then enable it by default if networking is enabled in prj.conf file. This way we can use generic networking config file when running the application for native_posix board. Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2018-03-25 23:17:57 +08:00
if NETWORKING
config NET_L2_ETHERNET
Kconfig: Use 'default' instead of 'def_bool' in Kconfig.defconfig files This can help find unused symbols. Those end up without a type if 'default' is used instead of 'def_bool', which generates a warning. Search for "Kconfig.defconfig" in https://docs.zephyrproject.org/latest/application/kconfig-tips.html for a longer explanation. Keep the 'def_bool' for the following symbols, which seem to be deliberately defined only in Kconfig.defconfig files: - ALTERA_AVALON_I2C - ALTERA_AVALON_MSGDMA - ALTERA_AVALON_PIO - ALTERA_AVALON_QSPI - ALTERA_AVALON_SYSID - CLOCK_CONTROL_IMX_CCM - CPU_EM4_DMIPS - CPU_EM4_FPUDA - CPU_EM4_FPUS - FP_FPU_DA - I2C_GECKO Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-11-14 00:15:49 +08:00
default y if !NET_LOOPBACK && !NET_TEST
drivers: eth: native_posix: Enable ethernet by default if needed As the native_posix board has ethernet driver, then enable it by default if networking is enabled in prj.conf file. This way we can use generic networking config file when running the application for native_posix board. Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2018-03-25 23:17:57 +08:00
config ETH_NATIVE_POSIX
Kconfig: Use 'default' instead of 'def_bool' in Kconfig.defconfig files This can help find unused symbols. Those end up without a type if 'default' is used instead of 'def_bool', which generates a warning. Search for "Kconfig.defconfig" in https://docs.zephyrproject.org/latest/application/kconfig-tips.html for a longer explanation. Keep the 'def_bool' for the following symbols, which seem to be deliberately defined only in Kconfig.defconfig files: - ALTERA_AVALON_I2C - ALTERA_AVALON_MSGDMA - ALTERA_AVALON_PIO - ALTERA_AVALON_QSPI - ALTERA_AVALON_SYSID - CLOCK_CONTROL_IMX_CCM - CPU_EM4_DMIPS - CPU_EM4_FPUDA - CPU_EM4_FPUS - FP_FPU_DA - I2C_GECKO Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-11-14 00:15:49 +08:00
default y if NET_L2_ETHERNET
drivers: eth: native_posix: Enable ethernet by default if needed As the native_posix board has ethernet driver, then enable it by default if networking is enabled in prj.conf file. This way we can use generic networking config file when running the application for native_posix board. Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2018-03-25 23:17:57 +08:00
endif # NETWORKING
native: Fix entropy generator kconfig warning Fixed the FAKE_ENTROPY_NATIVE_POSIX config warning by setting it only if the entropy generator is used, instead of setting it always and relying on it being set to "no" by not meeting that dependency. Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2018-06-13 21:52:34 +08:00
if ENTROPY_GENERATOR
config FAKE_ENTROPY_NATIVE_POSIX
Kconfig: Use 'default' instead of 'def_bool' in Kconfig.defconfig files This can help find unused symbols. Those end up without a type if 'default' is used instead of 'def_bool', which generates a warning. Search for "Kconfig.defconfig" in https://docs.zephyrproject.org/latest/application/kconfig-tips.html for a longer explanation. Keep the 'def_bool' for the following symbols, which seem to be deliberately defined only in Kconfig.defconfig files: - ALTERA_AVALON_I2C - ALTERA_AVALON_MSGDMA - ALTERA_AVALON_PIO - ALTERA_AVALON_QSPI - ALTERA_AVALON_SYSID - CLOCK_CONTROL_IMX_CCM - CPU_EM4_DMIPS - CPU_EM4_FPUDA - CPU_EM4_FPUS - FP_FPU_DA - I2C_GECKO Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-11-14 00:15:49 +08:00
default y
native: Fix entropy generator kconfig warning Fixed the FAKE_ENTROPY_NATIVE_POSIX config warning by setting it only if the entropy generator is used, instead of setting it always and relying on it being set to "no" by not meeting that dependency. Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2018-06-13 21:52:34 +08:00
endif # ENTROPY_GENERATOR
native: Fix host BT driver kconfig warning Fixed the BT_USERCHAN config warning by setting it only if BT_HCI is selected, instead of setting it always and relying on it being set to "no" by not meeting that dependency. Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2018-06-13 22:04:51 +08:00
if BT_HCI
choice BT_HCI_BUS_TYPE
default BT_USERCHAN
endchoice
endif # BT_HCI
uart: Add driver for posix arch Added a new UART driver for posix arch boards. The driver can be configured to either attach to a new pseudo-terminal, or to connect to the invoking shell stdin-out. Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2018-09-23 01:19:59 +08:00
if SERIAL
config UART_NATIVE_POSIX
Kconfig: Use 'default' instead of 'def_bool' in Kconfig.defconfig files This can help find unused symbols. Those end up without a type if 'default' is used instead of 'def_bool', which generates a warning. Search for "Kconfig.defconfig" in https://docs.zephyrproject.org/latest/application/kconfig-tips.html for a longer explanation. Keep the 'def_bool' for the following symbols, which seem to be deliberately defined only in Kconfig.defconfig files: - ALTERA_AVALON_I2C - ALTERA_AVALON_MSGDMA - ALTERA_AVALON_PIO - ALTERA_AVALON_QSPI - ALTERA_AVALON_SYSID - CLOCK_CONTROL_IMX_CCM - CPU_EM4_DMIPS - CPU_EM4_FPUDA - CPU_EM4_FPUS - FP_FPU_DA - I2C_GECKO Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-11-14 00:15:49 +08:00
default y
uart: Add driver for posix arch Added a new UART driver for posix arch boards. The driver can be configured to either attach to a new pseudo-terminal, or to connect to the invoking shell stdin-out. Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2018-09-23 01:19:59 +08:00
endif # SERIAL
native_posix: Add logger configuration backend Enable native logger backend for native_posix board in defconfig. Set also logger configuration options suitable for native_posix backend. Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com> Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2018-09-14 16:31:55 +08:00
if LOG
config LOG_BACKEND_NATIVE_POSIX
Kconfig: Use 'default' instead of 'def_bool' in Kconfig.defconfig files This can help find unused symbols. Those end up without a type if 'default' is used instead of 'def_bool', which generates a warning. Search for "Kconfig.defconfig" in https://docs.zephyrproject.org/latest/application/kconfig-tips.html for a longer explanation. Keep the 'def_bool' for the following symbols, which seem to be deliberately defined only in Kconfig.defconfig files: - ALTERA_AVALON_I2C - ALTERA_AVALON_MSGDMA - ALTERA_AVALON_PIO - ALTERA_AVALON_QSPI - ALTERA_AVALON_SYSID - CLOCK_CONTROL_IMX_CCM - CPU_EM4_DMIPS - CPU_EM4_FPUDA - CPU_EM4_FPUS - FP_FPU_DA - I2C_GECKO Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-11-14 00:15:49 +08:00
default y if !SERIAL
native_posix: Add logger configuration backend Enable native logger backend for native_posix board in defconfig. Set also logger configuration options suitable for native_posix backend. Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com> Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2018-09-14 16:31:55 +08:00
# For native_posix we can log immediately without any problem
# Doing so will be nicer for debugging
logging: Refactoring 'in place' mode to reduce memory footprint Changed 'in place' mode to bypass logger system and directly call active backends. With this approach memory footprint of the logger can be significantly reduced in terms of RAM and ROM. Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
2019-01-10 15:37:15 +08:00
config LOG_IMMEDIATE
Kconfig: Use 'default' instead of 'def_bool' in Kconfig.defconfig files This can help find unused symbols. Those end up without a type if 'default' is used instead of 'def_bool', which generates a warning. Search for "Kconfig.defconfig" in https://docs.zephyrproject.org/latest/application/kconfig-tips.html for a longer explanation. Keep the 'def_bool' for the following symbols, which seem to be deliberately defined only in Kconfig.defconfig files: - ALTERA_AVALON_I2C - ALTERA_AVALON_MSGDMA - ALTERA_AVALON_PIO - ALTERA_AVALON_QSPI - ALTERA_AVALON_SYSID - CLOCK_CONTROL_IMX_CCM - CPU_EM4_DMIPS - CPU_EM4_FPUDA - CPU_EM4_FPUS - FP_FPU_DA - I2C_GECKO Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-11-14 00:15:49 +08:00
default y
native_posix: Add logger configuration backend Enable native logger backend for native_posix board in defconfig. Set also logger configuration options suitable for native_posix backend. Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com> Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2018-09-14 16:31:55 +08:00
logging: Refactoring 'in place' mode to reduce memory footprint Changed 'in place' mode to bypass logger system and directly call active backends. With this approach memory footprint of the logger can be significantly reduced in terms of RAM and ROM. Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
2019-01-10 15:37:15 +08:00
# If we set LOG_IMMEDIATE, there is no need to have the logging thread
native_posix: Add logger configuration backend Enable native logger backend for native_posix board in defconfig. Set also logger configuration options suitable for native_posix backend. Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com> Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2018-09-14 16:31:55 +08:00
# running
config LOG_PROCESS_THREAD
Kconfig: Use 'default' instead of 'def_bool' in Kconfig.defconfig files This can help find unused symbols. Those end up without a type if 'default' is used instead of 'def_bool', which generates a warning. Search for "Kconfig.defconfig" in https://docs.zephyrproject.org/latest/application/kconfig-tips.html for a longer explanation. Keep the 'def_bool' for the following symbols, which seem to be deliberately defined only in Kconfig.defconfig files: - ALTERA_AVALON_I2C - ALTERA_AVALON_MSGDMA - ALTERA_AVALON_PIO - ALTERA_AVALON_QSPI - ALTERA_AVALON_SYSID - CLOCK_CONTROL_IMX_CCM - CPU_EM4_DMIPS - CPU_EM4_FPUDA - CPU_EM4_FPUS - FP_FPU_DA - I2C_GECKO Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-11-14 00:15:49 +08:00
default n
native_posix: Add logger configuration backend Enable native logger backend for native_posix board in defconfig. Set also logger configuration options suitable for native_posix backend. Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com> Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2018-09-14 16:31:55 +08:00
endif # LOG
uart: Add driver for posix arch Added a new UART driver for posix arch boards. The driver can be configured to either attach to a new pseudo-terminal, or to connect to the invoking shell stdin-out. Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2018-09-23 01:19:59 +08:00
if CONSOLE
config NATIVE_POSIX_CONSOLE
Kconfig: Use 'default' instead of 'def_bool' in Kconfig.defconfig files This can help find unused symbols. Those end up without a type if 'default' is used instead of 'def_bool', which generates a warning. Search for "Kconfig.defconfig" in https://docs.zephyrproject.org/latest/application/kconfig-tips.html for a longer explanation. Keep the 'def_bool' for the following symbols, which seem to be deliberately defined only in Kconfig.defconfig files: - ALTERA_AVALON_I2C - ALTERA_AVALON_MSGDMA - ALTERA_AVALON_PIO - ALTERA_AVALON_QSPI - ALTERA_AVALON_SYSID - CLOCK_CONTROL_IMX_CCM - CPU_EM4_DMIPS - CPU_EM4_FPUDA - CPU_EM4_FPUS - FP_FPU_DA - I2C_GECKO Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-11-14 00:15:49 +08:00
default y if !SERIAL
uart: Add driver for posix arch Added a new UART driver for posix arch boards. The driver can be configured to either attach to a new pseudo-terminal, or to connect to the invoking shell stdin-out. Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2018-09-23 01:19:59 +08:00
config UART_CONSOLE
Kconfig: Use 'default' instead of 'def_bool' in Kconfig.defconfig files This can help find unused symbols. Those end up without a type if 'default' is used instead of 'def_bool', which generates a warning. Search for "Kconfig.defconfig" in https://docs.zephyrproject.org/latest/application/kconfig-tips.html for a longer explanation. Keep the 'def_bool' for the following symbols, which seem to be deliberately defined only in Kconfig.defconfig files: - ALTERA_AVALON_I2C - ALTERA_AVALON_MSGDMA - ALTERA_AVALON_PIO - ALTERA_AVALON_QSPI - ALTERA_AVALON_SYSID - CLOCK_CONTROL_IMX_CCM - CPU_EM4_DMIPS - CPU_EM4_FPUDA - CPU_EM4_FPUS - FP_FPU_DA - I2C_GECKO Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-11-14 00:15:49 +08:00
default y if SERIAL
uart: Add driver for posix arch Added a new UART driver for posix arch boards. The driver can be configured to either attach to a new pseudo-terminal, or to connect to the invoking shell stdin-out. Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2018-09-23 01:19:59 +08:00
endif #CONSOLE
driver: SDL based display emulation driver This driver introduces an emulated LCD display for the native POSIX board. The emulated display driver makes use of SDL2 to render the displays frame buffer into a dedicated desktop window. Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2018-10-17 03:35:06 +08:00
if DISPLAY
config SDL_DISPLAY
default y
endif # DISPLAY
debug: CTF Tracing with POSIX backend This commit implements a CTF-backend for Zephyr's tracing API. The CTF-backend itself is split in a middle-layer and a bottom-layer. - Middle-layer decides the payload in event transactions, - Bottom-layer implements the IO transport. A simple POSIX bottom-layer is provided so far. Signed-off-by: François Delawarde <fnde@oticon.com>
2019-01-30 15:19:24 +08:00
if TRACING_CTF
config TRACING_CTF_BOTTOM_POSIX
default y
endif # TRACING_CTF
native: Fix host BT driver kconfig warning Fixed the BT_USERCHAN config warning by setting it only if BT_HCI is selected, instead of setting it always and relying on it being set to "no" by not meeting that dependency. Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2018-06-13 22:04:51 +08:00
endif # BOARD_NATIVE_POSIX
native_posix: Enable native posix USB driver if USB enabled Enables native_posix USB virtual driver when USB is selected. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2018-09-10 20:32:23 +08:00
if USB
config USB_NATIVE_POSIX
def_bool y
endif # USB