OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/drivers/flash/CMakeLists.txt

37 lines
1.1 KiB
CMake
Raw Normal View History

Introduce cmake-based rewrite of KBuild Introducing CMake is an important step in a larger effort to make Zephyr easy to use for application developers working on different platforms with different development environment needs. Simplified, this change retains Kconfig as-is, and replaces all Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild offers is replaced by a set of CMake extentions. These extentions have either provided simple one-to-one translations of KBuild features or introduced new concepts that replace KBuild concepts. This is a breaking change for existing test infrastructure and build scripts that are maintained out-of-tree. But for FW itself, no porting should be necessary. For users that just want to continue their work with minimal disruption the following should suffice: Install CMake 3.8.2+ Port any out-of-tree Makefiles to CMake. Learn the absolute minimum about the new command line interface: $ cd samples/hello_world $ mkdir build && cd build $ cmake -DBOARD=nrf52_pca10040 .. $ cd build $ make PR: zephyrproject-rtos#4692 docs: http://docs.zephyrproject.org/getting_started/getting_started.html Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-10-27 21:43:34 +08:00
zephyr_sources_ifdef(CONFIG_SPI_FLASH_W25QXXDV spi_flash_w25qxxdv.c)
zephyr_sources_ifdef(CONFIG_SOC_FLASH_QMSI soc_flash_qmsi.c)
zephyr_sources_ifdef(CONFIG_SOC_FLASH_NRF5 soc_flash_nrf5.c)
zephyr_sources_ifdef(CONFIG_SOC_FLASH_MCUX soc_flash_mcux.c)
zephyr_sources_ifdef(CONFIG_FLASH_PAGE_LAYOUT flash_page_layout.c)
zephyr_sources_ifdef(CONFIG_USERSPACE flash_handlers.c)
flash: add a driver for the internal flash on the SAM0 series. The SAM0 has a 64 byte page (the programing unit) with 4 pages to a row (the erase unit). This driver implements a read/modify/write to emulate the byte level writes used by NFFS. Signed-off-by: Michael Hope <mlhx@google.com>
2017-11-23 05:53:29 +08:00
zephyr_sources_ifdef(CONFIG_SOC_FLASH_SAM0 flash_sam0.c)
drivers: flash: Add Nios-II QSPI flash driver Add Altera Nios-II QSPI Flash controller driver which has has 1024 blocks or sectors wich each sector size being 64K bytes. This driver supports flash erase, write, read and lock operations. Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
2018-01-30 13:16:08 +08:00
zephyr_sources_ifdef(CONFIG_SOC_FLASH_NIOS2_QSPI soc_flash_nios2_qspi.c)
Introduce cmake-based rewrite of KBuild Introducing CMake is an important step in a larger effort to make Zephyr easy to use for application developers working on different platforms with different development environment needs. Simplified, this change retains Kconfig as-is, and replaces all Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild offers is replaced by a set of CMake extentions. These extentions have either provided simple one-to-one translations of KBuild features or introduced new concepts that replace KBuild concepts. This is a breaking change for existing test infrastructure and build scripts that are maintained out-of-tree. But for FW itself, no porting should be necessary. For users that just want to continue their work with minimal disruption the following should suffice: Install CMake 3.8.2+ Port any out-of-tree Makefiles to CMake. Learn the absolute minimum about the new command line interface: $ cd samples/hello_world $ mkdir build && cd build $ cmake -DBOARD=nrf52_pca10040 .. $ cd build $ make PR: zephyrproject-rtos#4692 docs: http://docs.zephyrproject.org/getting_started/getting_started.html Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-10-27 21:43:34 +08:00
flash: stm32: add support for STM32F0 flash controller Add the STM32F0 Embedded Flash support in the flash_stm32 driver interface. The STM32F0 has a particularity or use the HSI as clock source for the flash controller interface, so this clock must be enabled directly in the case HSE or another clock is used by the system clock. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-12-04 21:09:59 +08:00
if(CONFIG_SOC_SERIES_STM32F0X)
zephyr_sources_ifdef(CONFIG_SOC_FLASH_STM32
flash_stm32.c
flash_stm32f0x.c
)
endif()
Introduce cmake-based rewrite of KBuild Introducing CMake is an important step in a larger effort to make Zephyr easy to use for application developers working on different platforms with different development environment needs. Simplified, this change retains Kconfig as-is, and replaces all Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild offers is replaced by a set of CMake extentions. These extentions have either provided simple one-to-one translations of KBuild features or introduced new concepts that replace KBuild concepts. This is a breaking change for existing test infrastructure and build scripts that are maintained out-of-tree. But for FW itself, no porting should be necessary. For users that just want to continue their work with minimal disruption the following should suffice: Install CMake 3.8.2+ Port any out-of-tree Makefiles to CMake. Learn the absolute minimum about the new command line interface: $ cd samples/hello_world $ mkdir build && cd build $ cmake -DBOARD=nrf52_pca10040 .. $ cd build $ make PR: zephyrproject-rtos#4692 docs: http://docs.zephyrproject.org/getting_started/getting_started.html Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-10-27 21:43:34 +08:00
if(CONFIG_SOC_SERIES_STM32F3X)
zephyr_sources_ifdef(CONFIG_SOC_FLASH_STM32 flash_stm32f3x.c)
zephyr_sources_ifdef(CONFIG_SOC_FLASH_STM32 flash_stm32f3x_priv.c)
endif()
if(CONFIG_SOC_SERIES_STM32F4X)
zephyr_sources_ifdef(CONFIG_SOC_FLASH_STM32
flash_stm32.c
flash_stm32f4x.c
)
endif()
if(CONFIG_SOC_SERIES_STM32L4X)
zephyr_sources_ifdef(CONFIG_SOC_FLASH_STM32
flash_stm32.c
flash_stm32l4x.c
)
endif()
cmake: Use path-corrected version of ZEPHYR_BASE Instead of accessing the environment variable ZEPHYR_BASE every time we require accessing the source code root, use an intermediate variable that has OS path separators correctly set to '/' to avoid issues on Windows. Note: This removes the ZEPHYR_SOURCE_DIR CMake variable. External applications using that will need to change to use the new ZEPHYR_BASE variable. Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2018-01-11 22:46:44 +08:00
zephyr_include_directories_ifdef(CONFIG_SOC_FLASH_NRF5_RADIO_SYNC ${ZEPHYR_BASE}/subsys/bluetooth)