zephyr/boards/arm/arduino_zero/arduino_zero.yaml

identifier: arduino_zero
name: Arduino Zero
type: mcu
arch: arm
ram: 32
flash: 256
toolchain:
  - zephyr
  - gnuarmemb
  - xtools
supported:
  - adc
  - counter
  - dac
  - dma
  - gpio
  - hwinfo
  - pinmux
  - pwm
  - spi
  - uart
  - usb_device
  - watchdog
boards: add board and DTS definitions for the Arduino Zero. Signed-off-by: Michael Hope <mlhx@google.com> 2017-11-22 16:01:18 +08:00			`identifier: arduino_zero`
			`name: Arduino Zero`
			`type: mcu`
			`arch: arm`
			`ram: 32`
			`flash: 256`
			`toolchain:`
			`- zephyr`
build: Replace GCC ARM Embedded with GNU Arm Embedded The old GCC ARM Embedded website on launchpad (https://launchpad.net/gcc-arm-embedded) has been superseeded by the new GNU Arm Embedded one (https://developer.arm.com/open-source/gnu-toolchain/gnu-rm). This also means a change of name from "GCC" to "GNU". Reflect this in the enviroment variables so that the proper term is used henceforth. Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no> 2018-08-03 23:11:23 +08:00			`- gnuarmemb`
boards: arm: Add xtools as a supported toolchain Update all ARM boards to have xtools as a supported toolchain. Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2019-01-10 00:25:16 +08:00			`- xtools`
boards: arm: reduce the default drivers for the Arduino Zero Now that the SAM0 SOC selects the appropriate SAM0 driver for a class, reduce the drivers that are compiled in by default on the Arduino Zero. This reduces the size of `blink` from ~14 KiB to ~10 KiB. Also add the supported features to arduino_zero.yaml to get more coverage in the sanity tests. Signed-off-by: Michael Hope <mlhx@google.com> 2020-06-13 03:01:19 +08:00			`supported:`
			`- adc`
			`- counter`
boards: arm: document and enable the DAC for the Arduino Zero The previous commits added the SAM0 DAC driver. Now document and enable it, including enabling it in the DAC sample. Signed-off-by: Michael Hope <mlhx@google.com> 2020-07-04 21:32:19 +08:00			`- dac`
boards: arm: reduce the default drivers for the Arduino Zero Now that the SAM0 SOC selects the appropriate SAM0 driver for a class, reduce the drivers that are compiled in by default on the Arduino Zero. This reduces the size of `blink` from ~14 KiB to ~10 KiB. Also add the supported features to arduino_zero.yaml to get more coverage in the sanity tests. Signed-off-by: Michael Hope <mlhx@google.com> 2020-06-13 03:01:19 +08:00			`- dma`
			`- gpio`
			`- hwinfo`
			`- pinmux`
boards: arm: enable PWM on the Arduino Zero This enables PWM and connects it to the main LED. Tested by running samples/basic/blinky_pwm and /fade_led. Signed-off-by: Michael Hope <mlhx@google.com> 2020-06-13 04:01:44 +08:00			`- pwm`
boards: arm: reduce the default drivers for the Arduino Zero Now that the SAM0 SOC selects the appropriate SAM0 driver for a class, reduce the drivers that are compiled in by default on the Arduino Zero. This reduces the size of `blink` from ~14 KiB to ~10 KiB. Also add the supported features to arduino_zero.yaml to get more coverage in the sanity tests. Signed-off-by: Michael Hope <mlhx@google.com> 2020-06-13 03:01:19 +08:00			`- spi`
			`- uart`
			`- usb_device`
			`- watchdog`