zephyr/drivers/modem/CMakeLists.txt

zephyr_sources_ifdef(CONFIG_MODEM_RECEIVER modem_receiver.c)
zephyr_sources_ifdef(CONFIG_MODEM_SHELL modem_shell.c)
zephyr_sources_ifdef(CONFIG_MODEM_WNCM14A2A wncm14a2a.c)
drivers: modem: add modem receiver (tty) driver Modem drivers need a fast buffer-based receiver for passing data back and forth from the UART to the driver. This provides an efficient configuarable driver which merely sends and receives but doesn't process the data, that's left up to the modem driver. Signed-off-by: Michael Scott <mike@foundries.io> 2018-08-02 04:01:00 +08:00			`zephyr_sources_ifdef(CONFIG_MODEM_RECEIVER modem_receiver.c)`
drivers: modem: add modem shell extension Add a set of modem shell commands to support modem development. Start with: modem list: Lists all registered modems and related information modem send <modem receiver index> <command>: Send command to modem Signed-off-by: Michael Scott <mike@foundries.io> 2018-08-02 04:03:00 +08:00			`zephyr_sources_ifdef(CONFIG_MODEM_SHELL modem_shell.c)`
drivers: modem: add Wistron WNC-M14A2A LTE-M Modem Driver The WNC-M14A2A (LTE / LTE-M) modem is presented as an Arduino- compatible shield via AT&T's IoT Starter Kit v1.0. It was originally intended to work with the FRDM-K64F board, but in theory as long as the right pins are configured it can work with any board that supports Arduino-compatible headers. The driver utilizes the CONFIG_NET_OFFLOAD setting to avoid the normal handling of IP packets, and instead uses a socket-like UART interface to handle incoming and outgoing data. Signed-off-by: Michael Scott <mike@foundries.io> 2018-08-02 04:02:00 +08:00			`zephyr_sources_ifdef(CONFIG_MODEM_WNCM14A2A wncm14a2a.c)`